Found 287 results
37th cycle
Malinverni Carla
Ph.D. obtained in 202537th cycle (2021-2024)
Thesis: Study of glass-ceramics and brazing alloys for joining oxide and non-oxide ceramic matrix composites in corrosive and high-temperature environments
Tutors: Milena Salvo, Valentina Casalegno
Zhang Mingjie
Ph.D. obtained in 202537th cycle (2021-2024)
Thesis: Advanced Solid Polymer Electrolytes Based on Crosslinking and Concentrated Ionic Liquid
Tutors: Claudio Gerbaldi
Sesia Rossella
Ph.D. obtained in 202537th cycle (2021-2024)
Thesis: Exploitation of Polyphenols from Industrial Food By-Products for the Design of New Materials
Tutors: Silvia Spriano, Marco Sangermano, Sara Ferraris
Rosito Michele
Ph.D. obtained in 202537th cycle (2021-2024)
Thesis: Laser Powder Bed Fusion (L-PBF) of high-strength Aluminum alloys
Tutors: Claudio Francesco Badini, Elisa Padovano
36th cycle
Zhang Ying
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Towards Solid-State Hybrid Polymer Electrolytes by Innovative, Rapid, and Solvent-Free Procedures
Tutors: Claudio Gerbaldi
Cioni Matteo
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Exploring the Importance of Dynamics in Materials from the Atomic to the Supramolecular Scale Using Advanced Computational Methods
Tutors: Giovanni Maria Pavan
Crippa Martina
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Computational and Statistical Approaches to Study Complex Molecular Systems and Their Emergent Properties
Tutors: Giovanni Maria Pavan
Luceri Angelica
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Innovative smart composite coatings endowing antimicrobial properties to several materials
Tutors: Cristina Balagna, Monica Ferraris
Colombo Roberto
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Hybrid Power-Energy Electrodes
Tutors: Carlotta Francia, Silvia Bodoardo, Julia Ginette Nicole Amici
Monti Nicolo' Bruno Domenico
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Study of electrode fabrication and cell configuration for CO2 reduction
Tutors: Candido Pirri, Katarzyna Teresa Bejtka, Juqin Zeng
Marcioni Massimo
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Cellulose rich Composite materials from layer by layer coated fibers
Tutors: Federico Carosio
Lallukka Mari Sofia
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Materiomics analysis of metallic and ceramic materials for musculoskeletal regeneration
Tutors: Enrica Verne', Silvia Spriano
Vanzetti Matteo
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Optimization of additive manufacturing processes for copper and its alloys
Tutors: Federica Bondioli, Diego Giovanni Manfredi
Bakhshifarkoush Hanieh
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Investigating the Effects of Hot Isostatic Pressing on Additively Manufactured parts
Tutors: Sara Biamino, Giulio Marchese
Bosia Silvia
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Additive Manufacturing of Si-based systems
Tutors: Mariangela Lombardi
Martelli Pietro Antonio
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Microstructural design of additively manufactured Nickel superalloys through hot isostatic pressing and heat treatment
Tutors: Daniele Ugues
Pezzana Lorenzo
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Towards a more sustainable world: UV-curing & 3D printing of bio-based monomers: Synthesis and characterization of bio-derived monomers for cationic and radical UV-curing
Tutors: Marco Sangermano, Eva Malmstrom Jonsson
Aixala Perello Anna
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: New technologies and materials for energy harvesting from water
Tutors: Andrea Lamberti, Candido Pirri
Vincic Josip
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Laser Directed Energy Deposition for Processing and Repairing Steels
Tutors: Diego Giovanni Manfredi, Federica Bondioli
Barode Jayant
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Understanding the post-processing behaviour of additively manufactured A20X alloy: The new high-strength Al alloy in the market
Tutors: Diego Giovanni Manfredi, Federica Bondioli
Giardino Matteo
Ph.D. obtained in 202436th cycle (2020-2023)
Thesis: Nanostructured Materials for Ultrasensitive Detection of Contaminants in Water
Tutors: Davide Luca Janner
Cavallo Valentina
Ph.D. obtained in 202336th cycle (2020-2023)
Thesis: Tailoring intermolecular interactions in methacrylate-based copolymers and nanocomposites: Effect on molecular dynamics and thermal properties
Tutors: Alberto Fina
35th cycle
Meena Narayana Menon Devanarayanan
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Laser Micromachining: An Enabling Technology for Functional Surfaces and Materials
Tutors: Davide Luca Janner
Falco Marisa
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Crosslinked polymer-based electrolytes for high- energy density Li-based batteries for EVs
Tutors: Claudio Gerbaldi
Pagani Mattia
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Development of multifunctional biomaterials for the treatment of pelvis osteoporotic fractures
Tutors: Sonia Lucia Fiorilli, Chiara Vitale Brovarone
Matta Samuele
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Investigation of Different Types of Biochar on the Thermal Stability and Fire Retardancy of polymer
Tutors: Giulio Malucelli, Alberto Frache
Gardin Andrea
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Machine learning of molecular motifs in soft supramolecular systems
Tutors: Giovanni Maria Pavan
Leanza Luigi
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Multiscale Molecular Modelling and Advanced Simulations of Dynamic Supramolecular Systems
Tutors: Giovanni Maria Pavan
Martis Alberto
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Graphene based mixed matrix membranes for CO2 separation.
Tutors: Candido Pirri, Sergio Bocchini
Blangetti Nicola
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Effects of polymorphs and of Fe-doping on the properties of engineered nano TiO2 for photocatalytic degradation of emerging pollutant
Tutors: Barbara Bonelli, Serena Esposito, Francesca Stefania Freyria
De Zanet Alessandro
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Plasma-based surface treatment for improving joint strength of joined ceramics and ceramic matrix composites
Tutors: Valentina Casalegno, Milena Salvo
Di Falco Rosa
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Metals for Additive Manufacturing
Tutors: Mariangela Lombardi
Mussavi Rizi Seyed Hossein
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Advances in Bioresorbable phosphate glass optical fiber fabrication
Tutors: Davide Luca Janner, Nadia Giovanna Boetti
Inserra Barbara
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: 3D printing of composites in the Alumina-Zirconia system: from an engineering approach for the development of slurries to sintered samples with high microstructural properties
Tutors: Jean Marc Christian Tulliani, Paola Palmero
Zanchi Elisa
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: The electrophoretic deposition technique in Solid Oxide Cell technologies: from the protective coatings to new interface concepts
Tutors: Federico Smeacetto
Gamna Francesca
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Multifunctional bioinspired surfaces for different host responses
Tutors: Silvia Spriano, Sara Ferraris
Ghibaudo Cristian
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Investigation about new TiAl alloy to be processed by Electron Beam Powder Bed Fusion
Tutors: Sara Biamino, Giulio Marchese
Casamento Francesco
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Additive Manufacturing of Polypropylene Composites with Enhanced Mechanical and Electrical Properties
Tutors: Claudio Francesco Badini
Cantamessa Francesco
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Diels-Alder thermoreversible polymer networks and their nanocomposites
Tutors: Alberto Fina
Zanon Michael
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: PHOTOCURABLE HYDROGELS FOR TISSUE ENGINERING APPLICATIONS
Tutors: Marco Sangermano
Salvini Clara
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Unraveling CO2 Reduction Mechanisms on Selective Electrocatalysts: Computational Insights for Efficient Valorization
Tutors: Giancarlo Cicero, Angelica Monica Chiodoni, Michele Re Fiorentin
Siccardi Simone
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Self-healing Polymers for Lithium Metal Batteries
Tutors: Carlotta Francia
Jiang Tianhui
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Polyelectrolyte complexes embedding reduced graphite oxide
Tutors: Alberto Fina, Federico Carosio
Marinucci Fabrizio
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Development of AlSi10Mg based alloys for Additive Manufacturing Processes
Tutors: Federica Bondioli, Diego Giovanni Manfredi
Jandaghi Mohammadreza
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Development of the additively manufactured stainless steel 316L and AlSi10Mg alloys by in situ alloying and post-process treatment
Tutors: Matteo Pavese
Martucci Alessandra
Ph.D. obtained in 202335th cycle (2019-2022)
Thesis: Development and characterisation of Al-based alloys processed by PBF-LB/M
Tutors: Paolo Fino, Mariangela Lombardi
34th cycle
Ding Yufan
Ph.D. obtained in 202334th cycle (2018-2021)
Thesis: Innovative Conservation Technique for Bio-deteriorated and Soiled Ornamental Stone in Urban Areas: Laser versus Plasma Cleaning
Tutors: Emma Paola Maria Virginia Angelini
Caprioli Matteo
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Development and fabrication of self-healing hydrogels via vat photopolymerization 3D printing technology
Tutors: Candido Pirri, Shlomo Magdassi, Ignazio Roppolo
Sassone Daniele
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Single metal atom catalysts for the electrochemical reduction of CO2
Tutors: Candido Pirri, Sergio Bocchini, Juqin Zeng
Sivo Antonio
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: On the Laser Powder Bed Fusion based processing route for hard to weld Nickel Superalloys
Tutors: Daniele Ugues
Baudino Luisa
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Sustainable Methods for Lithium Recovery from Water and Unconventional Resources
Tutors: Andrea Lamberti, Candido Pirri
Materials for energy / Materiali per l'energia Functional materials / Materiali funzionali
Virgillito Enrico
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Metallic powders production via Gas Atomization: Material development for Laser Powder Bed Fusion processing
Tutors: Mariangela Lombardi, Diego Giovanni Manfredi
Barberi Jacopo
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Exploring proteins in Roughland: on the adsorption of proteins on biomaterials for osseointegration
Tutors: Silvia Spriano, Enrica Verne', Sara Ferraris
Surfaces / Superfici Materials for biomedical applications / Materiali per applicazioni biomediche Materials characterization / Caratterizzazione di materiali Metals / Mettalli Glasses / Vetri
Maruccia Elisa
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Versatile, direct nanocasting strategy to N-rich ordered mesoporous carbons for selective post-combustion CO2 capture and energy storage
Tutors: Claudio Gerbaldi, Candido Pirri
Muzi Elisa
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Advanced nanostructured optical glasses and glass-ceramics for photonic applications
Tutors: Davide Luca Janner
Lingua Gabriele
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Newly designed single-ion conducting polymer electrolytes enabling advanced Li-metal solid-state batteries
Tutors: Claudio Gerbaldi
Mohamed Sara Saber Younes
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Mesoporous Silica Spheres as drug carrier for wound treatment
Tutors: Barbara Onida, Mauro Banchero
Lupone Federico
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Additive manufacturing of carbon fiber reinforced thermoplastic polymer composites
Tutors: Claudio Francesco Badini, Elisa Padovano
Additive manufacturing / Manifattura additiva
Noe' Camilla
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Make it greener: Exploring novel biobased materials in photopolymerization processes
Tutors: Marco Sangermano, Minna Maria Hakkarainen
Kianfar Parnian
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Nanofibrous polymeric membranes by coupling electrospinning and photo-induced crosslinking
Tutors: Roberta Maria Bongiovanni, Alessandra Vitale
D'Anna Alessandra
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Fully bio-based polymer blends: optimization of processing aspects and influence of compatibilizers. Development of strategies to properties improvement
Tutors: Alberto Frache, Rossella Arrigo
Cosola Andrea
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Multifunctional cyclodextrin derivatives for digital light processing 3D-printing
Tutors: Marco Sangermano, Annalisa Chiappone
Busca Roberta
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Metal and dielectric based materials for power semiconductor performance improvements
Tutors: Candido Pirri, Sergio Ferrero
Verpoorten Eve Cecile J
Ph.D. obtained in 202234th cycle (2018-2021)
Thesis: Electrospun nanofibers based sensors in the context of health monitoring
Tutors: Candido Pirri, Marzia Quaglio
Peters Manuel Jacques Helena
Ph.D. obtained in 202134th cycle (2018-2021)
Thesis: Innovative techniques for the assessment of the degradation state of metallic artefacts
Tutors: Emma Paola Maria Virginia Angelini, Sabrina Grassini
33rd cycle
Molina Gutierrez Samantha
Ph.D. obtained in 202233rd cycle (2017-2020)
Thesis: Synthesis of biobased monomers and their aqueous emulsion and photoinduced polymerizations
Tutors: Roberta Maria Bongiovanni
Trusiano Giuseppe
Ph.D. obtained in 202133rd cycle (2017-2020)
Thesis: Novel perfluoropolyalkylethers (PFPAEs): from synthesis to applications
Tutors: Roberta Maria Bongiovanni
Latini Giulio
Ph.D. obtained in 202133rd cycle (2017-2020)
Thesis: Bio-based ionic liquids and poly(ionic liquid)s for CO2 capture
Tutors: Candido Pirri, Elena Maria Tresso
Spigarelli Luca
Ph.D. obtained in 202133rd cycle (2017-2020)
Thesis: Submicrometer particles separation in acoustofluidic devices
Tutors: Candido Pirri, Giancarlo Canavese
Romano Angelo
Ph.D. obtained in 202133rd cycle (2017-2020)
Thesis: Photo-responsive polymer networks for the design of polymer coatings with light-tunable properties
Tutors: Marco Sangermano
Gallichi Nottiani Duccio
Ph.D. obtained in 202133rd cycle (2017-2020)
Thesis: Advanced phosphate glasses for photonics: from materials to applications
Tutors: Davide Luca Janner
Lantean Simone
Ph.D. obtained in 202133rd cycle (2017-2020)
Thesis: A novel approach to fabricate bioinspired programmable composite materials: the 3D Printing way
Tutors: Marco Sangermano
Carrozza Alessandro
Ph.D. obtained in 202133rd cycle (2017-2020)
Thesis: Conventional and Innovative Titanium Alloys Produced Using Different Additive Manufacturing Technologies
Tutors: Paolo Fino
Versaci Daniele
Ph.D. obtained in 202133rd cycle (2017-2020)
Thesis: Materials for high energy Li-ion and post Li-ion batteries
Tutors: Silvia Bodoardo, Carlotta Francia
Gonzalez Flores Gustavo Adolfo
Ph.D. obtained in 202133rd cycle (2017-2020)
Thesis: Vat 3D printable materials and post-3D printing procedures for the development of engineered devices for the biomedical field
Tutors: Candido Pirri, Marco Sangermano
Bosio Federico
Ph.D. obtained in 202133rd cycle (2017-2020)
Thesis: Laser Powder Bed Fusion of AlSi10Mg+4Cu and AlSi10Mg alloys
Tutors: Mariangela Lombardi
Materials characterization / Caratterizzazione di materiali Additive manufacturing / Manifattura additiva
Strongone Valentina
Ph.D. obtained in 202133rd cycle (2017-2020)
Thesis: Preparation and characterization of UV-LED curable composite systems based on carbon fillers
Tutors: Giulio Malucelli, Alberto Tagliaferro
Pontremoli Carlotta
Ph.D. obtained in 202133rd cycle (2017-2020)
Thesis: Mesoporous bioactive glasses as smart platform to stimulate bone regeneration
Tutors: Sonia Lucia Fiorilli, Chiara Vitale Brovarone
Zaccagnini Pietro
Ph.D. obtained in 202133rd cycle (2017-2020)
Thesis: Graphene-based supercapacitors for flexible and harsh environments application
Tutors: Elena Maria Tresso, Andrea Lamberti
32nd cycle
Duraccio Donatella
Ph.D. obtained in 202132nd cycle (2016-2019)
Thesis: Piezoelectric composite films for energy harvesting devices
Tutors: Giulio Malucelli
De La Pierre Des Ambrois Stefano
Ph.D. obtained in 202032nd cycle (2016-2019)
Thesis: Advanced joined materials development and their shear strength evaluation for aerospace, energy and structural applications
Tutors: Monica Ferraris
Mohammadi Mehdi
Ph.D. obtained in 202032nd cycle (2016-2019)
Thesis: Development of calcium phosphate bioceramics with different architectures: Achievements by gelcasting and robocasting technologies
Tutors: Paola Palmero
Soares Gabriel
Ph.D. obtained in 202032nd cycle (2016-2019)
Thesis: Magnetization dynamics and spintronics of soft magnetic thin films
Tutors: Milena Salvo
D'Isanto Fabiana
Ph.D. obtained in 202032nd cycle (2016-2019)
Thesis: New oxidation protective coatings for thermoelectric materials
Tutors: Milena Salvo, Federico Smeacetto
Materials for energy / Materiali per l'energia Glasses / Vetri Ceramics / Ceramici
Maddalena Lorenza
Ph.D. obtained in 202032nd cycle (2016-2019)
Thesis: Nanocoatings based on graphene related materials for gas barrier and heat shielding application
Tutors: Alberto Fina, Federico Carosio
Pietroluongo Mario
Ph.D. obtained in 202032nd cycle (2016-2019)
Thesis: Mechanical recycling of polimer-based composites
Tutors: Claudio Francesco Badini
Varetti Sara
Ph.D. obtained in 202032nd cycle (2016-2019)
Thesis: Study and development of an innovative L-PBF demonstrator and an anti-ice solution based on trabecular structures
Tutors: Mariangela Lombardi
Parizia Simone
Ph.D. obtained in 202032nd cycle (2016-2019)
Thesis: Study of heat treatments for the Inconel 625 and process optimization for the Inconel 939 produced by Laser Powder Bed Fusion
Tutors: Paolo Fino
Salviati Sergio
Ph.D. obtained in 202032nd cycle (2016-2019)
Thesis: Thermochemical energy storage with salt hydrate composites: from materials design to lab-scale reactor validation
Tutors: Alberto Fina, Federico Carosio
Paccotti Niccolo'
Ph.D. obtained in 202032nd cycle (2016-2019)
Thesis: SERS active Ag/silicon based nanostructures for biosensing applications
Tutors: Francesco Geobaldo, Fabrizio Giorgis
Nasi Roberto
Ph.D. obtained in 202032nd cycle (2016-2019)
Thesis: Transition metals doped TiO2 nanoparticles obtained by sol‐gel templated assisted synthesis. Physico‐chemical properties and catalytic applications
Tutors: Barbara Bonelli
Tran Quang Nguyen
Ph.D. obtained in 201932nd cycle (2016-2019)
Thesis: Chimie verte sur catalyseurs perovskites
Tutors: Barbara Bonelli
31st cycle
Akram Muhammad Yasir
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Giunzione di compositi a matrice ceramica a base ossidica
Tutors: Monica Ferraris
Cavasin Matteo
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Study on accelerated exposure testing and thermal insulation for a Glass Fibre Reinforced Polymer in simulated Oil & Gas environment
Tutors: Milena Salvo, Marco Sangermano
Materials characterization / Caratterizzazione di materiali Corrosion / Corrosion Composites / Compositi Polymers / Polimeri Structural materials / Materiali strutturali
Cattano Giulio
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Feasibility studies on Laser Powder Bed Fusion of powders mixtures based on Aluminium alloys or High Entropy Alloys
Tutors: Paolo Fino
Gavoci Gentian
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Spectroscopic techniques applied to the real time monitoring and control of the production processes of the pharmaceutical and food industry
Tutors: Francesco Geobaldo
Javed Hassan
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Design, synthesis and characterization of glass-ceramic and ceramic based materials for solid oxide electrolysis cell (SOEC) applications
Tutors: Federico Smeacetto
Marro Bellot Cristian
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Design, processing and characterisation of new optical fibre sensors for harsh environment.
Tutors: Marco Sangermano
Alidoost Dario
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Innovative materials for post lithium-ion batteries
Tutors: Silvia Bodoardo
Roggero Carlo Maria
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Development of sensors for the on-site monitoring of dry-type electrical machines
Tutors: Jean Marc Christian Tulliani
Ziegler Daniele
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Innovative ozone sensors for environmental monitoring working at low temperature
Tutors: Paola Palmero
Di Francia Elisabetta
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: A systematic study of laser ablation efficacy as a low-invasive cleaning technique for Cu-based alloys
Tutors: Emma Paola Maria Virginia Angelini, Sabrina Grassini
Sensors / Sensori Materials characterization / Caratterizzazione di materiali Corrosion / Corrosion Surfaces / Superfici Additive manufacturing / Manifattura additiva Metals / Mettalli
Elsayed Ahmed Mahmoud
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Low-pressure plasma treatments for cleaning and protecting metallic heritage artefacts
Tutors: Emma Paola Maria Virginia Angelini, Sabrina Grassini
Di Pierro Alessandro
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Computational modeling of thermal interfaces in graphene based nanostructures
Tutors: Alberto Fina
Calandri Michele
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Inconel 718 superalloy produced through Selective Laser Melting for harsh environment applications
Tutors: Daniele Ugues
Placha Katarzyna
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Modelling and Constructing Devices Including Innovative Joining of High Temperature Thermoelectric Modules
Tutors: Milena Salvo
Peretti Veronica
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Boronizing of Ti6Al4V alloy as a biomaterial with enhanced surface mechanical properties
Tutors: Silvia Spriano
Lavagna Luca
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Carbon materials and their role as reinforcement in composite materials
Tutors: Matteo Pavese
Rafique Amjid
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Flexible Fiber-Shaped Supercapacitor for Wearable Electronics
Tutors: Andrea Lamberti
Razza Nicolo'
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Sviluppo di metodi fotochimici per la sintesi di particelle Janus con specifiche proprietà e capacità di auto-assemblaggio
Tutors: Marco Sangermano
Lopez Iscoa Pablo
Ph.D. obtained in 201931st cycle (2015-2018)
Thesis: Design, processing and characterization of glass fibers and coatings for health care industries
Tutors: Daniel Milanese
30th cycle
Pakkanen Jukka Antero
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: Designing for Additive Manufacturing - Product and Process Driven Design for Metals and Polymers
Tutors: Paolo Fino, Matteo Pavese
Gobber Federico Simone
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: Sviluppo di lame da taglio innovative TCT per il taglio ad elevata velocità di leghe metalliche
Tutors: Mario Rosso
Bangash Muhammad Kashif
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: Unione di Materiali Dissimili
Tutors: Monica Ferraris, Valentina Casalegno
Gianchandani Pardeep Kumar
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: Unione di materiali ceramici e compositi a matrice ceramica (CMC) per applicazioni aerospaziali ed energetiche
Tutors: Monica Ferraris, Valentina Casalegno
Trevisan Francesco
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: Study and characterisation of different metal alloys processed through laser powder bed fusion
Tutors: Diego Giovanni Manfredi, Paolo Fino
Colo' Francesca
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: Advanced and functional materials for sodium secondary batteries
Tutors: Claudio Gerbaldi
Pirani Federica
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: Bio-oriented Micro- and Nano- Structures based on Stimuli-Responsive Polymers
Tutors: Emiliano Descrovi, Candido Pirri
Leone Federica
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: Nanostructured Zinc Oxide as drug carrier for pharmaceutical applications
Tutors: Barbara Onida
Ostrovskaya Oxana
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: Oxidation resistance of Ti-Al intermetallic alloys and protection by ceramic coating.
Tutors: Claudio Francesco Badini
Ceci Ginistrelli Edoardo
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: Advanced applications of phosphate glass optical fibres in photonics and biophotonics
Tutors: Daniel Milanese
Caradonna Andrea
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: Carbon-based polymer nanocomposites with enhanced conductive properties
Tutors: Claudio Francesco Badini
Gigot Arnaud Nicolas
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: Graphene-based Supercapacitors
Tutors: Candido Pirri, Paola Rivolo
Battegazzore Daniele
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: Valorization of natural by-products and wastes as fillers for bio-composites
Tutors: Alberto Frache
Zaccone Marta
Ph.D. obtained in 201830th cycle (2014-2017)
Thesis: PP/MWCNT injection-moulded components: an analytical study of electrical properties and morphology
Tutors: Alberto Frache
29th cycle
Freni Pierluigi
Ph.D. obtained in 201829th cycle (2014-2016)
Thesis: Inspired by Nature: materials biomimicry to support human activities
Tutors: Sabrina Grassini, Paolo Fino
Ozzello Elena Daniela
Ph.D. obtained in 201829th cycle (2014-2016)
Thesis: Fouling-Release UV-Cured Coatings
Tutors: Roberta Maria Bongiovanni
Baudana Giorgio
Ph.D. obtained in 201829th cycle (2014-2016)
Thesis: γ-Titanium Aluminide Alloys for Aircraft and Automotive Engine Components Applications Processed by Electron Beam Melting
Tutors: Sara Biamino, Paolo Fino
Marchese Giulio
Ph.D. obtained in 201729th cycle (2014-2016)
Thesis: Study and characterisation of Ni-based superalloys produced by laser additive manufacturing
Tutors: Sara Biamino, Laura Montanaro
Conrado Federico
Ph.D. obtained in 201729th cycle (2014-2016)
Thesis: Thermally conductive polymeric based nanocomposites
Tutors: Matteo Pavese
Bassini Emilio
Ph.D. obtained in 201729th cycle (2014-2016)
Thesis: Heat treatment optimization and mechanical characterization of a Nickel-based superalloy obtained via hot isostatic pressing (HIPping)
Tutors: Daniele Ugues
Dadkhah Mehran
Ph.D. obtained in 201729th cycle (2014-2016)
Thesis: Preparation and characterization of a Novel mesoporous bioactive glass/calcium sulfate cement for vertebroplasty application
Tutors: Chiara Vitale Brovarone, Sonia Lucia Fiorilli
Aversa Alberta
Ph.D. obtained in 201729th cycle (2014-2016)
Thesis: Development and Characterisation of Aluminium Alloys and Aluminium Matrix Composites Produced via Laser Powder Bed Fusion
Tutors: Paolo Fino, Matteo Pavese
Kumari Naveeta
Ph.D. obtained in 201729th cycle (2014-2016)
Thesis: Production of menthol-loaded PCL nanoparticles by solvent displacement
Tutors: Antonello Barresi, Ada Ferri
Colonna Samuele
Ph.D. obtained in 201729th cycle (2014-2016)
Thesis: Thermally conductive polymer/graphene-related materials nanocomposites prepared by melt reactive processing
Tutors: Alberto Fina
Sabato Antonio Gianfranco
Ph.D. obtained in 201729th cycle (2014-2016)
Thesis: Study of new glass-ceramic sealants and protective coatings for SOFCs application: processing, characterization and performances in relevant conditions
Tutors: Federico Smeacetto
Bahadori Elnaz
Ph.D. obtained in 201729th cycle (2014-2016)
Thesis: Physico-Chemical properties of hybrid organic/inorganic nanotube of imogolite type
Tutors: Barbara Bonelli
Giraudo Alessandro
Ph.D. obtained in 201729th cycle (2014-2016)
Thesis: Development and tuning of automatized methods for food quality and process control in the agro-food industries
Tutors: Francesco Geobaldo
Casale Annalisa
Ph.D. obtained in 201729th cycle (2014-2016)
Thesis: Biomacromolecules: A sustainable approach for the design of fire retardants for textiles
Tutors: Giulio Malucelli
Galizia Pietro
Ph.D. obtained in 201729th cycle (2014-2016)
Thesis: Production and morphological and microstructural characterization of bulk composites or thick films for the study of multiphysics interactions
Tutors: Giovanni Maizza
Saboori Abdollah
Ph.D. obtained in 201729th cycle (2014-2016)
Thesis: Metal Matrix Nanocomposites; potentials, challenges and feasible solutions
Tutors: Claudio Francesco Badini
28th cycle
Vivier Florance
Ph.D. obtained in 201628th cycle (2013-2016)
Thesis: Synergetic effects inside a simplified friction material: study of the role of ingredients
Tutors: Marco Sangermano
Afify Ahmed Sabry Shehata
Ph.D. obtained in 201628th cycle (2013-2016)
Thesis: ELABORATION AND CHARACTERIZATION OF HUMIDITY SENSORS FOR ENVIRONMENTAL MONITORING
Tutors: Jean Marc Christian Tulliani
Calafiore Giuseppe
Ph.D. obtained in 201628th cycle (2013-2016)
Thesis: Nanoimprinting of Planar Photonic Devices for Visible Lights Applications.
Tutors: Candido Pirri
Gignone Andrea
Ph.D. obtained in 201628th cycle (2013-2016)
Thesis: Silici a mesoporosità controllata per il rilascio di farmaci in applicazioni topiche
Tutors: Barbara Onida
Jasmin Alladin
Ph.D. obtained in 201628th cycle (2013-2016)
Thesis: Oxide memristive devices
Tutors: Candido Pirri
Novara Chiara
Ph.D. obtained in 201628th cycle (2013-2016)
Thesis: Silver nanostructures on porous silicon for multiplexed Surface Enhanced Raman Scattering biosensing platforms
Tutors: Francesco Geobaldo
Porcarelli Luca
Ph.D. obtained in 201628th cycle (2013-2016)
Thesis: A new paradigm towards advanced Li-based batteries: a true polymeric approach
Tutors: Claudio Gerbaldi
Uhlmann Franziska Johanna Luise
Ph.D. obtained in 201628th cycle (2013-2016)
Thesis: Development of Protective Ultra-High Temperature Coatings/Ceramics (UHTC's) for Ceramic Matrix Composites in Extreme Environments
Tutors: Claudio Francesco Badini
Celetti Giorgia
Ph.D. obtained in 201628th cycle (2013-2016)
Thesis: Microfluidics for human health: a versatile tool for new progress in cancer diagnosis and contaminants detection
Tutors: Candido Pirri, Carlo Ricciardi
Mastronardi Vincenzo Mariano
Ph.D. obtained in 201628th cycle (2013-2016)
Thesis: Trasduttori piezoelettrici basati su nitruro di alluminio e poliimmide per applicazioni tattili
Tutors: Candido Pirri, Carlo Ricciardi
Rossi Domenico
Ph.D. obtained in 201628th cycle (2013-2016)
Thesis: In-flow physical-morphological analysis of PBMC in microfluidic device by light scattering
Tutors: Candido Pirri, Carlo Ricciardi
27th cycle
Canali Riccardo
Ph.D. obtained in 201527th cycle (2012-2014)
Thesis: Studio, sviluppo e caratterizzazione di materiali a base alluminio realizzati per Addtive Manufacturing
Tutors: Paolo Fino
Castella Christian
Ph.D. obtained in 201527th cycle (2012-2014)
Thesis: Self hardening aluminum alloys for automotive applications
Tutors: Mario Rosso
D'Amico Giuseppe
Ph.D. obtained in 201527th cycle (2012-2014)
Thesis: Materiali a base Si-SiC ottenuti per infiltrazione di silicio: studio ed applicazioni
Tutors: Claudio Francesco Badini
De Miranda Auristela Carla
Ph.D. obtained in 201527th cycle (2012-2014)
Thesis: Progettazione, produzione e caratterizzazione di sigillanti vetro ceramici per applicazioni nell ambito di celle a combustibilile ad ossidi solidi
Tutors: Federico Smeacetto
Doberdo' Italo
Ph.D. obtained in 201527th cycle (2012-2014)
Thesis: From electrode manufacturing to Li-ion battery testing, modeling & simulation, toward new generation electric vehicle
Tutors: Nerino Penazzi
Moura Dos Santos Rosane
Ph.D. obtained in 201527th cycle (2012-2014)
Thesis: DEVELOPMENT OF A NOVEL ELECTRICAL CONDUCTIVE FLAME RETARDANT BIO-BASED THERMOPLASTIC POLYURETHANE
Tutors: Giulio Malucelli
Nazar Rabia
Ph.D. obtained in 201527th cycle (2012-2014)
Thesis: Fotopolimeri conduttivi: nella sintesi situ di nanoparticelle metalliche
Ottone Melis Carminna Sophia
Ph.D. obtained in 201527th cycle (2012-2014)
Thesis: CATALIZZATORI ETEROGENEI ED ETEROGENIZATI PER LA REAZIONE DI OSSIDAZIONE DELL'ACQUA STUDIATI PER MEZZO DI OSSIDANTI SACRIFICALI
Tutors: Barbara Bonelli
Padovano Elisa
Ph.D. obtained in 201527th cycle (2012-2014)
Thesis: Preparazione e caratterizzazione di laminati ceramici appartenenti al sistema ZrB2-SiC per applicazioni spaziali.
Tutors: Claudio Francesco Badini
Shafia Ehsan
Ph.D. obtained in 201527th cycle (2012-2014)
Thesis: Synthesis and Chatacterization of Fe-modified Imogoliyte nanotubes
Tutors: Barbara Bonelli
Zolin Lorenzo
Ph.D. obtained in 201527th cycle (2012-2014)
Thesis: Large-scale production of Li-ion cells exploiting natural cellulose binders and water-based papermaking technologies
Tutors: Nerino Penazzi, Claudio Gerbaldi
26th cycle
Tecchio Paolo
Ph.D. obtained in 201526th cycle (2011-2013)
Thesis: Streamlining Life Cycle Assessment to support Ecodesign through multi-criteria materials selection
Tutors: Alberto Frache
Fornabaio Marta
Ph.D. obtained in 201426th cycle (2011-2013)
Thesis: Composites in the Alumina-Zirconia system: an engineering approach for an effective tailoring of microstructural features and performances
Tutors: Laura Montanaro
Ahmed Abdelkader Abdelhamid Mohamed
Ph.D. obtained in 201426th cycle (2011-2013)
Thesis: Metal oxide semiconductors as humidity and NOx sensors for environmental monitoring
Tutors: Jean Marc Christian Tulliani
Barletta Luca
Ph.D. obtained in 201426th cycle (2011-2013)
Thesis: Interesterificazione enzimatica random di Palm Olein per future applicazioni industriali
Tutors: Debora Fino
Borgna Mirko
Ph.D. obtained in 201426th cycle (2011-2013)
Thesis: Sensori all'ammoniaca a temperatura ambiente
Tutors: Jean Marc Christian Tulliani
Chen Xiang
Ph.D. obtained in 201426th cycle (2011-2013)
Thesis: Fabrication and properties of particulate reinforced aluminum matrix composites by spontaneous infiltration
Tutors: Claudio Francesco Badini
Faraldi Federica
Ph.D. obtained in 201426th cycle (2011-2013)
Thesis: Environmentally friendly plasma treatments for surface nano-functionalization and protection of metals
Tutors: Emma Paola Maria Virginia Angelini
Gallio Giorgio
Ph.D. obtained in 201426th cycle (2011-2013)
Thesis: Studio di una giunzione innovativa per il sistema ruota
Tutors: Laura Montanaro
Marchi Sophie
Ph.D. obtained in 201426th cycle (2011-2013)
Thesis: PREPARATION AND CHARACTERIZATION OF SILICONE NANOCOMPOSITES BY UV-INDUCED HYDROSILATION FOR OUTDOOR POLYMERIC INSULATORS
Tutors: Marco Sangermano
Naguib Ibrahim Mohamed Mohamed
Ph.D. obtained in 201426th cycle (2011-2013)
Thesis: Different toughening strategies for UV-cured epoxy resins
Tutors: Marco Sangermano
Terner Mathieu
Ph.D. obtained in 201426th cycle (2011-2013)
Thesis: Innovative materials for high temperature structural applications: 3rd generation gamma-TiAl alloys fabricated by Electron Beam Melting
Tutors: Claudio Francesco Badini
Vitale Alessandra
Ph.D. obtained in 201426th cycle (2011-2013)
Thesis: Nuovi fotopolimeri e processi tecnologici innovativi per la fabbricazione di dispositivi microfluidici
Tutors: Roberta Maria Bongiovanni
Ali Elsaeedmahmoud Ali Moataz
Ph.D. obtained in 201226th cycle (2011-2013)
Thesis: Synthesis and densification of Ti3SiC2 used as a PCDbinding material
25th cycle
Abdul Karim Muhammad Ramzan
Ph.D. obtained in 201525th cycle (2010-2012)
Thesis: Metal matrix composites reinforced with SiC long fibers and carbon nanomaterials produced by electrodeposition
Tutors: Claudio Francesco Badini
Atif Muhammad
Ph.D. obtained in 201425th cycle (2010-2012)
Thesis: SURFACE MODIFICATION AND CHARACTERIZATION OF CARBON BLACK; UV-CURED COLORED EPOXY COMPOSITES
Tutors: Roberta Maria Bongiovanni
Ramadoss Radhika
Ph.D. obtained in 201325th cycle (2010-2012)
Thesis: TRIBOLOGICAL PROPERTIES AND WEAR MECHANISM OF HARD COATINGS
Amici Julia Ginette Nicole
Ph.D. obtained in 201325th cycle (2010-2012)
Thesis: Preparation and characterization of metallic and metal oxide nanoparticles for biomedical applications
Tutors: Marco Sangermano
Bertone Elisa
Ph.D. obtained in 201325th cycle (2010-2012)
Thesis: Instrumental methods for quality and safety control in agro-food products
Tutors: Francesco Geobaldo
Caldarola Dario
Ph.D. obtained in 201325th cycle (2010-2012)
Thesis: Silica beds and silica monoliths for pollutants removal and HPLC
Tutors: Barbara Onida
Destro Matteo
Ph.D. obtained in 201325th cycle (2010-2012)
Thesis: Towards realization of an innovative Li-ion battery: materials optimization and system up-scalable solutions
Tutors: Nerino Penazzi
Guerriero Andrea
Ph.D. obtained in 201325th cycle (2010-2012)
Thesis: Development of polymer-matrix composites for sensing applications
Tutors: Laura Montanaro
Lorusso Massimo
Ph.D. obtained in 201325th cycle (2010-2012)
Thesis: DEVELOPMENT OF PVD COATINGS FOR THE FIELD OF AL ALLOYS FORMING FROM LIQUID STATE
Tutors: Daniele Ugues
Marchisio Silvia
Ph.D. obtained in 201325th cycle (2010-2012)
Thesis: Composite materials reinforced by carbon nanotubes
Tutors: Matteo Pavese
Penna Andrea
Ph.D. obtained in 201325th cycle (2010-2012)
Thesis: TiAI fabricated by EBM as innovative material for aerospace applications with low anvironmental impact
Tutors: Claudio Francesco Badini
Yang Wenshu
Ph.D. obtained in 201325th cycle (2010-2012)
Thesis: Preparation, microstructure, mechanical and thermophysical properties of short carbon fibre/SiC multilayer composites by tape casting and pressureless sintering
Tutors: Claudio Francesco Badini
24th cycle
Carosio Federico
Ph.D. obtained in 201224th cycle (2009-2011)
Thesis: Layer by Layer assembly of nanostructured coatings for flame reetardancy and barrier properties
Tutors: Giovanni Camino
Chiappone Annalisa
Ph.D. obtained in 201224th cycle (2009-2011)
Thesis: Ligno cellulosic materials for energy storage
Tutors: Roberta Maria Bongiovanni
Di Lupo Francesca
Ph.D. obtained in 201224th cycle (2009-2011)
Thesis: Synthesis and characterization of nanostructured materials for Li-ion secondary batteries
Tutors: Nerino Penazzi
Han Shaohua
Ph.D. obtained in 201224th cycle (2009-2011)
Thesis: Joining of ceramic and ceramic matrix composite for nuclear applications
Tutors: Monica Ferraris
Ma Hao
Ph.D. obtained in 201224th cycle (2009-2011)
Thesis: Hierarchical Porous Materials for Acid Catalysis in Biorefinery
Tutors: Barbara Onida
Pan Guanjun
Ph.D. obtained in 201224th cycle (2009-2011)
Thesis: INNOTIVE TI ALLOYS FOR BIOMEDICAL APPLICATIONS: SURFACE MODIFICATION AND MANUFACTURING PROCESSES
Tutors: Monica Ferraris
Roppolo Ignazio
Ph.D. obtained in 201224th cycle (2009-2011)
Thesis: UV-cured photoluminescent coatings: acrylic and epoxy systems
Tutors: Giulio Malucelli
Spina Giulia
Ph.D. obtained in 201224th cycle (2009-2011)
Thesis: Transparent YAG and composite ceramic materials in the system Alumnia-YAG-zirconia
Tutors: Laura Montanaro
Vasquez Sandoval Dreidy Mercedes
Ph.D. obtained in 201224th cycle (2009-2011)
Thesis: MoSi2 - NbSi2 COMPOSITES FABRICATED BY SPARK PLASMA SINTERING AND TAPE CASTING FOR HIGH TEMPERATURE APPLICATIONS.
Tutors: Claudio Francesco Badini
Zanzottera Cristina
Ph.D. obtained in 201224th cycle (2009-2011)
Thesis: Hybrid organic/inorganic nanotubes of imogolite type
Tutors: Barbara Bonelli
Zeng Juqin
Ph.D. obtained in 201224th cycle (2009-2011)
Thesis: Synthesis and characterization of the new electrocatalytic materials to improve the performance, operability and life-time of PEM fuel cells
Tutors: Paolo Spinelli
Zhao Yun
Ph.D. obtained in 201224th cycle (2009-2011)
Thesis: MODIFICATION AND CHARACTERIZATION OF POLY (LACTIC ACID) BASED ON BIOPLASTIC FOR FRUIT PACKAGING
Tutors: Francesco Geobaldo
23rd cycle
Foschia Marina
Ph.D. obtained in 201223rd cycle (2008-2010)
Thesis: Environmental Sustainability of Bioplastics.
Tutors: Bruno De Benedetti
Gioffredi Emilia
Ph.D. obtained in 201223rd cycle (2008-2010)
Thesis: Polymer crystallization: micro- and nano- filler effects on IPP
Tutors: Giovanni Camino
Ventrella Andrea
Ph.D. obtained in 201223rd cycle (2008-2010)
Thesis: Joining of ceramic composites and advanced ceramics
Tutors: Monica Ferraris
Balagna Cristina
Ph.D. obtained in 201123rd cycle (2008-2010)
Thesis: New processes for metallic implantable biomaterials.
Tutors: Silvia Spriano
Baroni Chiara
Ph.D. obtained in 201123rd cycle (2008-2010)
Thesis: Near room temperature NOx detection and soil humidity content determination by means of new doped-hematite sensors
Tutors: Jean Marc Christian Tulliani
Cavalieri Alessio
Ph.D. obtained in 201123rd cycle (2008-2010)
Thesis: Room temperature ammonia sensors for food industry applications.
Tutors: Laura Montanaro
Colucci Giovanna
Ph.D. obtained in 201123rd cycle (2008-2010)
Thesis: Hybrid Thiol-Ene photocured nanostructured materials
Tutors: Aldo Priola
Freyria Francesca Stefania
Ph.D. obtained in 201123rd cycle (2008-2010)
Thesis: NANOSTRUCTURED IRON BASED MATERIALS
Gervasio Cristina
Ph.D. obtained in 201123rd cycle (2008-2010)
Thesis: CATALYTIC REMOVAL OF TAR FROM GASIFICATION GASES
Tutors: Giancarlo Baldi
Giuggioli Nicole Roberta
Ph.D. obtained in 201123rd cycle (2008-2010)
Thesis: QUALITY IMPROVEMENT AND MONITORING WITH NON DESTRUCTIVE METHODS OF STORED FRUITS
Tutors: Francesco Geobaldo
Periolatto Monica
Ph.D. obtained in 201123rd cycle (2008-2010)
Thesis: MODIFICATION OF FIBERS SURFACE TO CONFER FUNCTIONAL PROPERTIES
Tutors: Franco Ferrero
Vandoni Laura
Ph.D. obtained in 201123rd cycle (2008-2010)
Thesis: Study and development of self-lubricant massive materials and coatings
Tutors: Daniele Ugues
Vega Bolivar Claudia Milena
Ph.D. obtained in 201123rd cycle (2008-2010)
Thesis: SiC-based multilayer for applications in extreme environment: H2 generation plants
Tutors: Claudio Francesco Badini
Brunazzo Daniele
Ph.D. obtained in 201123rd cycle (2008-2010)
Thesis: Confinement and guidance of surface electromagnetic waveson photonic nanostructures
Tutors: Fabrizio Giorgis
22nd cycle
Lomello Fernando Carlos
Ph.D. obtained in 201022nd cycle (2007-2009)
Thesis: Optimization of nanostructured oxide-based powders by surface modification
Tutors: Barbara Bonelli
Li Pira Nello
Ph.D. obtained in 201022nd cycle (2007-2009)
Thesis: From hybrid to fully inorganic nanostructured electroluminescent devices for lighting and display technologies
Tutors: Monica Ferraris
Antonini Andrea
Ph.D. obtained in 201022nd cycle (2007-2009)
Thesis: Innovative multilayer ceramics for aerospace applications
Tutors: Claudio Francesco Badini
Baino Francesco
Ph.D. obtained in 201022nd cycle (2007-2009)
Thesis: Synthesis and characterization of porous biomaterials for bone tissue engineering and regenerative medicine
Tutors: Enrica Verne'
Gebavi Hrvoje
Ph.D. obtained in 201022nd cycle (2007-2009)
Thesis: Rare earth doped glass optical fibers for photonic applications
Tutors: Monica Ferraris
Mortera Renato Silvio
Ph.D. obtained in 201022nd cycle (2007-2009)
Thesis: MCM-41 silica sphere for drug delivery
Tutors: Barbara Onida
Nair Jijeesh Ravi
Ph.D. obtained in 201022nd cycle (2007-2009)
Thesis: Uv-Curable Polymer Electrolyte Membranes For Lithium-Based Battery Applications
Tutors: Roberta Maria Bongiovanni
Peila Roberta
Ph.D. obtained in 201022nd cycle (2007-2009)
Thesis: Preparation and characterization of polymer-clay nanocomposites: effect of the nanoclay modification on the structure-properties of the nanocomposites
Tutors: Aldo Priola
Piumetti Marco
Ph.D. obtained in 201022nd cycle (2007-2009)
Thesis: Vandium based systems for catalytic applications
Tutors: Barbara Bonelli
Sciacca Beniamino
Ph.D. obtained in 201022nd cycle (2007-2009)
Thesis: Porous silicon photonic nanostructures for biosensing devices
Tutors: Francesco Geobaldo
Naglieri Valentina
Ph.D. obtained in 201022nd cycle (2007-2009)
Thesis: ALUMINA-ZIRCONIA COMPOSITES: ELABORATION AND CHARACTERIZATION, IN VIEW OF THE ORTHOPAEDIC APPLICATION
Tutors: Laura Montanaro
Vannier Aurore
Ph.D. obtained in 200822nd cycle (2007-2009)
Thesis: Procédés d'ignifugation du poly(éthylène téréphtalate) - Application textile
Tutors: Giovanni Camino
21st cycle
Lopez Gonzalez Yotselys Lisbeth
Ph.D. obtained in 201021st cycle (2006-2008)
Thesis: Self-assembling thin film as innovative materials for tarnishing and corrosion protection of metals
Tutors: Bruno De Benedetti
Medici Andrea
Ph.D. obtained in 201021st cycle (2006-2008)
Thesis: New Coatings Based on Fluorinated UV-curable Systems
Tutors: Roberta Maria Bongiovanni
Serafini Piero Maria
Ph.D. obtained in 201021st cycle (2006-2008)
Thesis: Surface modification of cellulosic fibers by UV-Grafting
Tutors: Aldo Priola
Atias Adrian Isabel Cristina
Ph.D. obtained in 200921st cycle (2006-2008)
Thesis: Development and production of nanostructured Mg-Ni alloys for hydrogen storage
Tutors: Bruno De Benedetti
Bottero Ilaria
Ph.D. obtained in 200921st cycle (2006-2008)
Thesis: Synthesis and characterization of imogolite nanotubes.
Tutors: Barbara Bonelli
Costanzo Alberto
Ph.D. obtained in 200921st cycle (2006-2008)
Thesis: Atomistic modelling of mullite and its bulk corrosion in water vapour environments
Tutors: Daniele Mazza
De Caro Tilde
Ph.D. obtained in 200921st cycle (2006-2008)
Thesis: Corrosion bronze mechanism
Tutors: Emma Paola Maria Virginia Angelini
Frascella Francesca
Ph.D. obtained in 200921st cycle (2006-2008)
Thesis: Fabrication and modification of porous silicon layered and multilayered structures for optical sensing devices.
Tutors: Francesco Geobaldo
Torres Miranda Eloy Alexander
Ph.D. obtained in 200921st cycle (2006-2008)
Thesis: Optimal design of nanocomposite Cr(x)Al(1-x) N-A Si3N4 PVD coatings for hot Working tools
Tutors: Mario Rosso
Venturello Alberto
Ph.D. obtained in 200921st cycle (2006-2008)
Thesis: Advanced instrumental methods for the determination of physico-chemical and textural properties of fruits.
Tutors: Francesco Geobaldo
Vinante Michele
Ph.D. obtained in 200921st cycle (2006-2008)
Thesis: Study on carbon nanomaterial surface properties for biomedical applications
Tutors: Alberto Tagliaferro
Lombardi Mariangela
Ph.D. obtained in 200921st cycle (2006-2008)
Thesis: Elaboration of cellular ceramics for filtration and biomedical applications
Tutors: Laura Montanaro
20th cycle
Ajitdoss Lakshmi Chandru
Ph.D. obtained in 200920th cycle (2005-2007)
Thesis: Study of glass non linearity by thermal poling for photonic devices
Tutors: Monica Ferraris
Aluigi Annalisa
Ph.D. obtained in 200820th cycle (2005-2007)
Thesis: Nanofibre non-wovens by electrospinning of keratin-based solutions.
Tutors: Franco Ferrero
Ambrosio Elisa Paola
Ph.D. obtained in 200820th cycle (2005-2007)
Thesis: Mesoporous carbons Supports for PEMFC catalysts.
Tutors: Nerino Penazzi
Amerio Ezio
Ph.D. obtained in 200820th cycle (2005-2007)
Thesis: Nanostructured organic-inorganic hybrid coatings obtained through UV-curing and sol-gel process.
Tutors: Aldo Priola
Bollito Gianluca Oreste Achille
Ph.D. obtained in 200820th cycle (2005-2007)
Thesis: Direct methanol fuel cell.
Tutors: Barbara Onida
Cauda Valentina Alice
Ph.D. obtained in 200820th cycle (2005-2007)
Thesis: Incorporation of ordered mesoporous silica inside macroporous systems for drugs adsorption and delivery.
Tutors: Edoardo Garrone
Faraldi Paolo
Ph.D. obtained in 200820th cycle (2005-2007)
Thesis: Self cleaning surfaces for household appliances.
Tutors: Guido Saracco
Fuso Laura
Ph.D. obtained in 200820th cycle (2005-2007)
Thesis: Synthesis and deposition of ceramic oxides by combustion synthesis.
Tutors: Francesco Geobaldo
Ghiglieno Filippo
Ph.D. obtained in 200820th cycle (2005-2007)
Thesis: New materials for optoelectronic devices in TLC application.
Tutors: Francesco Geobaldo
Liao Guihua
Ph.D. obtained in 200820th cycle (2005-2007)
Thesis: Fabbrication and characterization of rare earth doped glasses and fibers for laser application at different infrared wavelengths.
Tutors: Monica Ferraris
Manfredi Diego Giovanni
Ph.D. obtained in 200820th cycle (2005-2007)
Thesis: High ceramic content composites: Co-continuous ceramic composites.
Tutors: Claudio Francesco Badini
Santamaria Razo Diego Adolfo
Ph.D. obtained in 200820th cycle (2005-2007)
Thesis: Silica based nanospheres: synthesis, characterization and photonic applications.
Tutors: Francesco Geobaldo
Tartaglione Giuseppina
Ph.D. obtained in 200820th cycle (2005-2007)
Thesis: Preparation and characterization of polymer nanocomposite.
Tutors: Giovanni Camino
19th cycle
Lak Nahal
Ph.D. obtained in 200819th cycle (2004-2006)
Thesis: Preparation and characterization of polymer nanocomposite based on lamellar silicate modified with organophilic compatibilizer.
Tutors: Aldo Priola
Armandi Marco
Ph.D. obtained in 200719th cycle (2004-2006)
Thesis: Synthesis and characterization of templated porous carbons as potential materials for hydrogen storage.
Tutors: Edoardo Garrone
Camarota Beatrice
Ph.D. obtained in 200719th cycle (2004-2006)
Thesis: A phenyl-bridged periodic mesoporous organosilica with "crystal-like" walls: study of crystallinity and surface properties.
Tutors: Edoardo Garrone
Camedda Luca
Ph.D. obtained in 200719th cycle (2004-2006)
Thesis: Advanced ceramic materials for extreme aerospace applications.
Tutors: Claudio Francesco Badini
Castrovinci Cercatore Andrea
Ph.D. obtained in 200719th cycle (2004-2006)
Thesis: Intrinsic properties and combustion behaviour of polymeric materials
Tutors: Giovanni Camino
Fina Alberto
Ph.D. obtained in 200719th cycle (2004-2006)
Thesis: Silsesquioxane-based polymer nanocomposites and hybrids
Tutors: Giovanni Camino
Lucariello Maria Laura
Ph.D. obtained in 200719th cycle (2004-2006)
Thesis: Development and electrochemical characterization of proton exchange membrane fuel cells.
Tutors: Nerino Penazzi
Russo Nunzio
Ph.D. obtained in 200719th cycle (2004-2006)
Thesis: Mixed oxide catalysts for a sustainable environment.
Tutors: Guido Saracco
Turcato Elisa Aurelia
Ph.D. obtained in 200719th cycle (2004-2006)
Thesis: Polymer-layered silicate nanocomposites prepared by uv-curing technique
Tutors: Aldo Priola
18th cycle
Gianelli Walter
Ph.D. obtained in 200618th cycle (2003-2005)
Thesis: Nanotubes in polymer materials
Tutors: Giovanni Camino
Ph.D. obtained in 2006
18th cycle (2003-2005)
Thesis: Eco-compatibility treatment technologies with specific reference to the recycling of metallic and plastic fractions
Tutors: Giovanni Camino
Martena Manuela
Ph.D. obtained in 200618th cycle (2003-2005)
Thesis: Thermal Barrier Coatings for aircraft turbine blades: deterioration phenomena and modelling of degradation processes
Tutors: Claudio Francesco Badini
Palmisano Pietro
Ph.D. obtained in 200618th cycle (2003-2005)
Thesis: Development of catalysts produced by Combustion System Method to reduce Diesel Engine emissions
Tutors: Claudio Francesco Badini
Salvador Gian Paolo
Ph.D. obtained in 200618th cycle (2003-2005)
Thesis: Characterization of Porotous Silicon in presence of inorganic and organic species
Tutors: Francesco Geobaldo
Troia Adriano
Ph.D. obtained in 200618th cycle (2003-2005)
Thesis: Sonochemical preparation of functional materials
Tutors: Barbara Onida
Casalegno Valentina
Ph.D. obtained in 200618th cycle (2003-2005)
Thesis: Joining of composite materials for nuclear fusion applications
Tutors: Pietro Appendino
De Cola Patrizia Laura
Ph.D. obtained in 200618th cycle (2003-2005)
Thesis: Novel porous catalysts for the dehydrogenation of propane
Tutors: Edoardo Garrone
Deorsola Fabio Alessandro
Ph.D. obtained in 200618th cycle (2003-2005)
Thesis: Development of nanostructured materials for solid state gas sensors
Tutors: Ignazio Amato
Gerbaldi Claudio
Ph.D. obtained in 200618th cycle (2003-2005)
Thesis: Mesoporous materials and nanostructured LiFePO4 as cathodes for secondary Li-ion batteries: synthesis and characterization
Tutors: Nerino Penazzi
Vallauri Dario
Ph.D. obtained in 200618th cycle (2003-2005)
Thesis: Solid state self-propagating combustion synthesis of micron and submicron-size ceramic and metal-ceramic materials
Tutors: Ignazio Amato
17th cycle
Ieluzzi Gianmarco
Ph.D. obtained in 200617th cycle (2002-2004)
Thesis: Synthesis and Characterization of nanostructures for optical and photonic applications
Tutors: Candido Pirri
Peter Ildiko
Ph.D. obtained in 200617th cycle (2002-2004)
Thesis: Vitrification of bottom ash from incineration of Municipal Solid Waste and their reuse for the preparation of new materials
Tutors: Pietro Appendino
Montefusco Francesca
Ph.D. obtained in 200517th cycle (2002-2004)
Tutors: Roberta Maria Bongiovanni
16th cycle
Simone Antonia
Ph.D. obtained in 200416th cycle (2001-2003)