Ph.D. in Scienza E Tecnologia Dei Materiali , 35th cycle (2019-2022)
Ph.D. obtained in 2023
Dissertation:
Development of the additively manufactured stainless steel 316L and AlSi10Mg alloys by in situ alloying and post-process treatment (Abstract)
Tutors:
Matteo PaveseTeaching
Teachings
Master of Science
- Scienza e tecnologia dei materiali funzionali. A.A. 2021/22, INGEGNERIA DEI MATERIALI. Collaboratore del corso
Publications
Works published during the Ph.D. View all publications in Porto@Iris
- Jandaghi, Mohammadreza (2023)
Development of the additively manufactured stainless steel 316L and AlSi10Mg alloys by in situ alloying and post-process treatment. relatore: PAVESE, MATTEO; , 35. XXXV Ciclo, P.: 153
Doctoral Thesis - Jandaghi, Mohammadreza; Aversa, A.; Manfredi, D.; Calignano, F.; Lavagna, L.; Pavese, M. (2022)
In situ alloying of AlSi10Mg-5 wt% Ni through laser powder bed fusion and subsequent heat treatment. In: JOURNAL OF ALLOYS AND COMPOUNDS, vol. 904. ISSN 0925-8388
Contributo su Rivista - Jandaghi, Mohammadreza; Pouraliakbar, H.; Saboori, A.; Hong, S. I.; Pavese, M. (2021)
Comparative insight into the interfacial phase evolutions during solution treatment of dissimilar friction stir welded AA2198-AA7475 and AA2198-AA6013 aluminum sheets. In: MATERIALS, vol. 14, pp. 1-14. ISSN 1996-1944
Contributo su Rivista - Jandaghi, Mohammadreza; Saboori, A.; Iuliano, L.; Pavese, M. (2021)
On the effect of rapid annealing on the microstructure and mechanical behavior of additively manufactured stainless steel by Laser Powder Bed Fusion. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 828. ISSN 0921-5093
Contributo su Rivista - Jandaghi, Mohammad Reza; Saboori, Abdollah; Khalaj, Gholamreza; Shiran, Mohammadreza ... (2020)
Microstructural Evolutions and its Impact on the Corrosion Behaviour of Explosively Welded Al/Cu Bimetal. In: METALS, vol. 10. ISSN 2075-4701
Contributo su Rivista - Jandaghi, Mohammad Reza; Pouraliakbar, Hesam; Hong, Sun Ig; Pavese, Matteo (2020)
Grain boundary transition associated intergranular failure analysis at TMAZ/SZ interface of dissimilar AA7475-AA2198 joints by friction stir welding. In: MATERIALS LETTERS, vol. 280. ISSN 0167-577X
Contributo su Rivista - Jandaghi, Mohammadreza; Badini, C.; Pavese, M. (2020)
Dissimilar friction stir welding of AA2198 and AA7475: Effect of solution treatment and aging on the microstructure and mechanical strength. In: JOURNAL OF MANUFACTURING PROCESSES, vol. 57, pp. 712-724. ISSN 1526-6125
Contributo su Rivista