Master of Science

• Strategie di sviluppo dei materiali. A.A. 2021/22, INGEGNERIA DEI MATERIALI. Collaboratore del corso

Bachelor of Science

• Materiali metallici. A.A. 2019/20, INGEGNERIA DEI MATERIALI. Collaboratore del corso

• Bassini, Emilio; Marchese, Giulio; Sivo, Antonio; Martelli, Pietro Antonio; Gullino, ... (2022)
  Effect of Cold Rolling on Microstructural and Mechanical Properties of a Dual-Phase Steel for Automotive Field. In: MATERIALS, vol. 15, pp. 7482-7501. ISSN 1996-1944
  Contributo su Rivista
• Galech Napal, Unai; Aristizabal Segarra, Miren; Elguezabal Lazcano, Borja; Sivo, ... (2022)
  Thermal Mass Effect on the Solution Cooling Rate and on HIPped Astroloy Component Properties. In: MATERIALS, vol. 15. ISSN 1996-1944
  Contributo su Rivista
• Sivo, Antonio (2022)
  On the Laser Powder Bed Fusion based processing route for hard to weld Nickel Superalloys. relatore: UGUES, DANIELE; , 34. XXXIV Ciclo, P.: 236
  Doctoral Thesis
• Capozzi, Luigi C.; Sivo, Antonio; Bassini, Emilio (2022)
  Powder spreading and spreadability in the additive manufacturing of metallic materials: a critical review. In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol. 308. ISSN 0924-0136
  Contributo su Rivista
• Bassini, E.; Sivo, A.; Martelli, P. A.; Rajczak, E.; Marchese, G.; Calignano, F; ... (2022)
  Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via Laser Powder Bed Fusion (LPBF). In: JOURNAL OF ALLOYS AND COMPOUNDS. ISSN 0925-8388
  Contributo su Rivista
• Bassini, Emilio; Sivo, Antonio; Ugues, Daniele (2021)
  Assessment of the Hardening Behavior and Tensile Properties of a Cold-Rolled Bainitic–Ferritic Steel. In: MATERIALS, vol. 14. ISSN 1996-1944
  Contributo su Rivista
• Martucci, A.; Marinucci, F.; Sivo, A.; Aversa, A.; Manfredi, D.; Bondioli, F.; Fino, P.; ... (2021)
  An automatic on top analysis of single scan tracks to evaluate the laser powder bed fusion building parameters. In: MATERIALS, vol. 14. ISSN 1996-1944
  Contributo su Rivista
• Bassini, E.; Sivo, A.; Marchese, G.; Martelli, P.; Calignano, F.; Biamino, S.; Ugues, D. (2021)
  Effetto della pressatura isostatica a caldo (HIP) e del trattamento termico di leghe di Nichel fabbricate via Selective Laser Melting (SLM) = Effect of the Hot Isostatic Pressing (HIP) and heat treatment to nickel-based alloys obtained with Selective Laser Melting (SLM). In: LA METALLURGIA ITALIANA, vol. 113, pp. 65-73. ISSN 0026-0843
  Contributo su Rivista
• Marchese, Giulio; Parizia, Simone; Sivo, Antonio; Bassini, Emilio; Calignano, Flaviana; ... (2020)
  Influence of the Process Parameters on the Densification and Microstructure of Ni-based Superalloys with Different Amount of γ′ Former Alloying Elements Processed by SLM. In: TMS 2020 Annual Meeting & Exhibition, San Diego (CA), February 23-27, 2020
  Contributo in Atti di Convegno (Proceeding)