• SCIENZA E TECNOLOGIA DEI MATERIALI, 2023/2024 (40. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2022/2023 (39. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2021/2022 (38. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2020/2021 (37. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2019/2020 (36. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2018/2019 (35. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2017/2018 (34. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2016/2017 (33. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2015/2016 (32. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2014/2015 (31. ciclo)
  Politecnico di TORINO

• Collegio di Ingegneria Chimica e dei Materiali. Componente
• Collegio di Ingegneria Civile ed Edile. Componente invitato
• Collegio di Ingegneria Meccanica, Aerospaziale e dell'Autoveicolo. Componente

• Institute of Science and Engineering of Materials for Innovative Technologies

• Additive Manufacturing
• Ceramic Materials
• Materials for high temperatures and nanocomposites
• Metallic Materials

• BurnerRig Laboratory
• Furnaces and Additive manufacturing Laboratory
• Laboratory of Thermal Analysis 1/A
• Metallographic Preparation Laboratory
• TapeCasting Laboratory

Projects funded by competitive calls

• NEUMANN - Novel Energy and propUlsion systeMs for Air domiNaNce , (2022-2027) - Responsabile Scientifico
  UE-funded research
• CNMS - Spoke 1 - Sustainable Mobility Center (Centro Nazionale per la Mobilità Sostenibile – CNMS) - Spoke 1 , (2022-2025) - Responsabile Scientifico di Struttura
  PNRR – Mission 4
• TARGET - addiTive mAnufactuRing for liGhtwEight joinTs , (2022-2022) - Responsabile Scientifico
  Nationally funded research - PRIN
• CA - TIAICHARGER - TITANIUM ALUMINIDE TURBOCHARGERS – IMPROVED FUEL ECONOMY, REDUCED EMISSIONS , (periodo sconosciuto) - Responsabile Scientifico
  UE-funded research - VII PQ - CAPACITIES - Research for the benefit of SMEs
• TIALCHARGER - TITANIUM ALUMINIDE TURBOCHARGERS – IMPROVED FUEL ECONOMY, REDUCED EMISSIONS , (2013-2015) - Responsabile Scientifico
  UE-funded research - VII PQ - CAPACITIES - Research for the benefit of SMEs

Projects funded by commercial contracts

• MESSA A PUNTO DI DUE TRATTAMENTI TERMICI DELLA LEGA TI-45AI-8NB-2CR , (2013-2013) - Responsabile Scientifico
  Commercial Research
• MESSA A PUNTO DEI TRATTAMENTI TERMICI DELLA LEGA RENÈ80 PRODOTTA TRAMITE PROCESSO DI ELECTRON BEAM MELTING , (2011-2012) - Responsabile Scientifico
  Commercial Research

• Samuele Di Sturco. Programme in Scienza E Tecnologia Dei Materiali (cycle 38, 2022-in progress)
• Mohammad Saleh Kenevisi. Programme in Scienza E Tecnologia Dei Materiali (cycle 37, 2022-in progress)
• Serena Lerda. Programme in Scienza E Tecnologia Dei Materiali (cycle 37, 2021-in progress)
  Thesis: Powder bed fusion of Ni-based superalloys: process optimization, heat treatments and mechanical performance
• Hanieh Bakhshifarkoush. Programme in Scienza E Tecnologia Dei Materiali (cycle 36, 2020-2024)
  Thesis: Investigating the Effects of Hot Isostatic Pressing on Additively Manufactured parts
• Cristian Ghibaudo. Programme in Scienza E Tecnologia Dei Materiali (cycle 35, 2019-2023)
  Thesis: Investigation about new TiAl alloy to be processed by Electron Beam Powder Bed Fusion

• Di Sturco, Samuele; Marchese, Giulio; Bondioli, Federica; Lombardi, Mariangela; Ugues, ... (2025)
  Understanding the processability, microstructure, and mechanical properties of molybdenum processed by electron beam powder bed fusion. In: INTERNATIONAL JOURNAL OF REFRACTORY METALS AND HARD MATERIALS, vol. 129. ISSN 2213-3917
  Contributo su Rivista
• Yadegari, Mohammad Javad; Martucci, Alessandra; Biamino, Sara; Ugues, Daniele; ... (2025)
  Aluminum Laser Additive Manufacturing: A Review on Challenges and Opportunities Through the Lens of Sustainability. In: APPLIED SCIENCES, vol. 15. ISSN 2076-3417
  Contributo su Rivista
• Kenevisi, Mohammad Saleh; Gobber, Federico Simone; Maculotti, Giacomo; Genta, ... (2025)
  Surface topography and cross-section analysis of K340 cold work tool steel double-tracks deposited by directed energy deposition technique. In: CIRP - JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, vol. 59, pp. 158-169. ISSN 1755-5817
  Contributo su Rivista
• Lerda, S.; Bassini, E.; Marchese, G.; Biamino, S.; Ugues, D. (2024)
  Rapid L-PBF printing of IN718 coupled with HIP-quench: A novel approach to manufacture and heat treatment of a nickel-based alloy. In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY, vol. 30, pp. 6983-6994. ISSN 2238-7854
  Contributo su Rivista
• Marchese, Giulio; Piscopo, Gabriele; Lerda, Serena; Salmi, Alessandro; Atzeni, Eleonora; ... (2024)
  Heat-Treated Inconel 625 by Laser Powder Bed Fusion: Microstructure, Tensile Properties, and Residual Stress Evolution. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, vol. 33, pp. 6825-6834. ISSN 1059-9495
  Contributo su Rivista
• Valenza, Federica; Aversa, Alberta; Biamino, Sara; Atzeni, Eleonora; Salmi, Alessandro; ... (2024)
  Influence of production systems and anodizing treatments on additively manufactured mechanical interlocking structures. In: XIV Convegno INSTM sulla Scienza e Tecnologia dei Materiali, Cagliari (IT), 09-12 giugno 2024, pp. 201-201
  Contributo in Atti di Convegno (Proceeding)
• Thangamani, Geethapriyan; Felicioni, Stefano; Padovano, Elisa; Biamino, Sara; Lombardi, ... (2024)
  A Comprehensive Review of Laser Powder Bed Fusion in Jewelry: Technologies, Materials, and Post-Processing with Future Perspective. In: METALS, vol. 14. ISSN 2075-4701
  Contributo su Rivista
• Conte, Antonietta; Gedda, Giacomo; Lerda, Serena; Masseni, Filippo; Biamino, Sara; ... (2024)
  Experimental investigation of the effects of different internal surface features on additive-manufactured resonant igniters performance. In: ACTA ASTRONAUTICA. ISSN 0094-5765
  Contributo su Rivista
• Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; ... (2024)
  Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure. In: MATERIALS, vol. 17. ISSN 1996-1944
  Contributo su Rivista
• Kenevisi, Ms; Martelli, Pa; Gobber, Fs; Ugues, D; Biamino, S (2024)
  Processability of K340 Cold Work Tool Steel by Directed Energy Deposition Technique. In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, vol. 1310. ISSN 1757-8981
  Contributo su Rivista
• Kenevisi, Mohammad Saleh; Biamino, Sara; Ugues, Daniele (2024)
  A Multivariate Experimental Design to Investigate the Effect of Different Heat Treatment Procedures and Parameters’ Interactions on the Hardness and Retained Austenite of K340 Cold-work Tool Steel. In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. ISSN 1059-9495
  Contributo su Rivista

• In-situ synthesis, densification and shaping of non-oxide ceramics by vacuum additive manufacturing technologies. national and international Patent
  Inventors: Sara Biamino Paolo Fino Mariangela Lombardi Laura Montanaro Abdollah Saboori
• In-situ synthesis, densification and shaping of non-oxide ceramics by vacuum additive manufacturing technologies. national and international Patent
  Inventors: Sara Biamino Paolo Fino Mariangela Lombardi Laura Montanaro Abdollah Saboori
• In-situ synthesis, densification and shaping of non-oxide ceramics by vacuum additive manufacturing technologies. national and international Patent
  Inventors: Sara Biamino Paolo Fino Mariangela Lombardi Laura Montanaro Abdollah Saboori
• A method of fabricating aluminium matrix composite by pressureless infiltration. national and international Patent
  Inventors: Claudio Francesco Badini Sara Biamino Paolo Fino Matteo Pavese
• A method of fabricating aluminium matrix composite by pressureless infiltration. national and international Patent
  Inventors: Claudio Francesco Badini Sara Biamino Paolo Fino Matteo Pavese
• Procedimento di sintesi 'in situ' di ossidi micro e nanostrutturati su di un supporto poroso. national and international Patent
  Inventors: Claudio Francesco Badini Sara Biamino Paolo Fino Matteo Pavese Guido Saracco