Corso di laurea magistrale

• Stampi e processi di formatura. A.A. 2019/20, INGEGNERIA MECCANICA. Collaboratore del corso
• Production technologies for body components. A.A. 2019/20, AUTOMOTIVE ENGINEERING (INGEGNERIA DELL'AUTOVEICOLO). Collaboratore del corso
• Production technologies for body components. A.A. 2020/21, AUTOMOTIVE ENGINEERING (INGEGNERIA DELL'AUTOVEICOLO). Collaboratore del corso
• Production technologies for body components. A.A. 2021/22, AUTOMOTIVE ENGINEERING (INGEGNERIA DELL'AUTOVEICOLO). Collaboratore del corso
• Production technologies for body components. A.A. 2022/23, AUTOMOTIVE ENGINEERING (INGEGNERIA DELL'AUTOVEICOLO). Collaboratore del corso

Corso di laurea di 1° livello

• Strumenti dell'Ingegneria per l'industria 4.0. A.A. 2022/23, INGEGNERIA GESTIONALE. Collaboratore del corso
• Design per l'industrializzazione (modulo di Modello virtuale per la produzione). A.A. 2022/23, DESIGN E COMUNICAZIONE. Collaboratore del corso

• Fabbricazione additiva

• Khandpur, M. S.; Minetola, P.; Stiuso, V.; Rifuggiato, S.; Fontana, L.; Lannunziata, E.; ... (2023)
  An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data. In: Fourth International Conference on Recent Advances in Materials and Manufacturing 2022, Erode, Tamil Nadu (INDIA), 08-09/12/2022. ISSN 2214-7853
  Contributo in Atti di Convegno (Proceeding)
• Fontana, Luca (2023)
  Analisi della sostenibilità e aspetti di responsabilità legale nella decentralizzazione della produzione mediante stampa 3D. relatore: MINETOLA, PAOLO; MANTELERO, ALESSANDRO; , 35. XXXV Ciclo, P.: 147
  Doctoral Thesis
• Fontana, Luca; Giubilini, Alberto; Arrigo, Rossella; Malucelli, Giulio; Minetola, Paolo (2022)
  Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses. In: POLYMERS, vol. 14, pp. 1-19. ISSN 2073-4360
  Contributo su Rivista
• Fontana, Luca; Minetola, Paolo; Iuliano, Luca; Rifuggiato, Serena; Khandpur, MANKIRAT ... (2022)
  An investigation of the influence of 3d printing parameters on the tensile strength of PLA material. In: Third International Conference on Aspects of Materials Science and Engineering (ICAMSE 2022), Chandigarh (India), 4-5 marzo 2022, pp. 657-663. ISSN 2214-7853
  Contributo in Atti di Convegno (Proceeding)
• Stiuso, V.; Minetola, P.; Giubilini, A.; Fontana, L.; Khandpur, M. S.; Rifuggiato, S.; ... (2022)
  Benchmarking analysis of digital light processing resins in terms of dimensional accuracy and geometric tolerances. In: International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2022), Madhya Pradesh (India), 9-10 aprile 2022, pp. 6654-6662. ISSN 2214-7853
  Contributo in Atti di Convegno (Proceeding)
• Rifuggiato, Serena; Minetola, Paolo; Stiuso, Vito; Khandpur, MANKIRAT SINGH; Fontana, ... (2022)
  An investigation of the influence of 3d printing defects on the tensile performance of ABS material. In: Third International Conference on Aspects of Materials Science and Engineering (ICAMSE 2022), Chandigarh (India), 4-5 marzo 2022, pp. 851-858. ISSN 2214-7853
  Contributo in Atti di Convegno (Proceeding)
• Minetola, Paolo; Fontana, Luca; Arrigo, Rossella; Malucelli, Giulio; Iuliano, Luca (2021)
  Mechanical Performance of Polylactic Acid from Sustainable Screw-Based 3D Printing. In: Sustainable Design and Manufacturing 2020 (SDM2020), KES Virtual Conference Centre, 9-11 settembre 2020, pp. 531-542. ISBN: 978-981-15-8131-1
  Contributo in Atti di Convegno (Proceeding)
• Minetola, Paolo; Stiuso, Vito; Calignano, Flaviana; Galati, Manuela; Khandpur, Mankirat ... (2021)
  Experimental validation of laser powder bed fusion simulation. In: 3rd International Conference on Inventive Research in Material Science and Technology (ICIRMCT 2021), Coimbatore (India), 22-23 gennaio 2021, pp. 1-10
  Contributo in Atti di Convegno (Proceeding)
• Khandpur, M S; Galati, M; Minetola, P; Marchiandi, G; Fontana, L; Stiuso, V (2021)
  Development of a low-cost monitoring system for open 3d printing. In: International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2021), Madhya Pradesh, India, 6th-7th March 2021. ISSN 1757-8981
  Contributo in Atti di Convegno (Proceeding)
• Fontana, L; Minetola, P; Calignano, F; Iuliano, L; Khandpur, M S; Stiuso, V (2021)
  Experimental testing of 3D printed polymeric heat exchangers. In: International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2021), Madhya Pradesh, India, 6th-7th March 2021. ISSN 1757-8981
  Contributo in Atti di Convegno (Proceeding)
• Stiuso, V; Minetola, P; Calignano, F; Galati, M; Khandpur, M S; Fontana, L (2021)
  Experimental assessment of compensated distortion in selective laser melting of Ti6Al4V parts. In: International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2021), Madhya Pradesh, India, 6th-7th March 2021. ISSN 1757-8981
  Contributo in Atti di Convegno (Proceeding)
• Minetola, Paolo; Galati, Manuela; Calignano, Flaviana; Iuliano, Luca; Rizza, Giovanni; ... (2020)
  Comparison of dimensional tolerance grades for metal AM processes. In: 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME '19, Ischia (NA), Gulf of Naples, Italy, 17-19 July 2019, pp. 399-404. ISSN 2212-8271
  Contributo in Atti di Convegno (Proceeding)