Master of Science

• Challenge@PoliTo by Firms - NODES Spoke 7/TOSA. A.A. 2023/24, INGEGNERIA GESTIONALE (ENGINEERING AND MANAGEMENT). Collaboratore del corso

• DESIGN AND EXPERIMENTATION OF MECHANICAL DRIVE COMPONENTS AND THERMOGRAPHY

• Santoro, Luca; Sesana, Raffaella (2025)
  A physics-informed framework for feature extraction and defect segmentation in pulsed infrared thermography. In: ENGINEERING FAILURE ANALYSIS. ISSN 1350-6307
  Contributo su Rivista
• Santoro, Luca; Sesana, Raffaella (2025)
  A pilot study using flying spot laser thermography and signal reconstruction. In: OPTICS AND LASERS IN ENGINEERING, vol. 188, pp. 1-12. ISSN 0143-8166
  Contributo su Rivista
• Razza, Valentino; Santoro, Luca; De Maddis, Manuela (2025)
  Gradient-based image generation for thermographic material inspection. In: APPLIED THERMAL ENGINEERING. ISSN 1359-4311
  Contributo su Rivista
• Quercio, M.; Santoro, L.; Poskovic, E.; Sesana, R.; Canova, A. (2025)
  Magnetic and thermal characterization of Fe2.9wt.%Si for magnetic shielding applications. In: IEEE ACCESS, vol. 13, pp. 2890-2902. ISSN 2169-3536
  Contributo su Rivista
• Santoro, Luca; Sesana, Raffaella; Cura, Francesca Maria (2025)
  Rapid Assessment of the Fatigue Limit Using an Iterative Algorithm Applied to Intrinsic Dissipation. In: 53° congresso nazionale AIAS, Napoli, 4-7 settembre 2024, pp. 1-8
  Contributo in Atti di Convegno (Proceeding)
• Santoro, Luca (2025)
  Active thermography as non destructive evaluation technique for welded joints. relatore: SESANA, RAFFAELLA; CURA', Francesca Maria; , 37. XXXVII Ciclo, P.: 167
  Doctoral Thesis
• Sesana, Raffaella; R, Raffaella; Santoro, L; Borghese, V.; Santini, S (2024)
  Correlazioni Preliminari tra Proprietà Termiche e Densità nelle Strutture in Legno con Prove Non Distruttive. In: INGENIO-WEB.IT https://www.ingenio-web.it/, pp. 1-14
  Contributo su Rivista
• Sesana, Raffaella; Santoro, Luca (2024)
  Proposal for kf effective notch factor estimation for life assessment of welded joint based on geometric parameters. In: ENGINEERING FAILURE ANALYSIS. ISSN 1350-6307
  Contributo su Rivista
• Santoro, Luca; Sesana, Raffaella; Diller, Johannes; Radlbeck, Christina; Mensinger, ... (2024)
  Dissipative and thermal aspects in cyclic loading of additive manufactured AISI 316L. In: ENGINEERING FAILURE ANALYSIS, vol. 163. ISSN 1350-6307
  Contributo su Rivista
• Santoro, Luca; Razza, Valentino; Maddis, De; Manuela, (2024)
  Nugget and corona bond size measurement through active thermography and transfer learning model. In: THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. ISSN 1433-3015
  Contributo su Rivista
• Santoro, Luca; Quercio, Michele; Canova, Aldo; Sesana, Raffaella (2024)
  Measuring Thermal and Electrical Performances of Additively Manufactured Magnetic Shielding Material: An Active Thermography Approach. In: NONDESTRUCTIVE TESTING AND EVALUATION. ISSN 1058-9759
  Contributo su Rivista
• Borghese, Vittoria; Santoro, Luca; Santini, Silvia; Sesana, Raffaella (2024)
  Correlation between thermal and density properties of chestnuts: preliminary results of experimental non-destructive testing. In: ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, vol. 24. ISSN 1644-9665
  Contributo su Rivista
• Santoro, L; Sesana, R; Cura, F M; Corsaro, L (2023)
  IN LINE DEFECT DETECTION IN STEEL WELDING PROCESS BY MEANS OF THERMOGRAPHY. In: ICEM20 EXPERIMENTAL MECHANICS IN ENGINEERING AND BIOMECHANICS, Oporto, 2-7 July 2023, pp. 1059-1068. ISBN: 978-989-54756-6-7
  Contributo in Atti di Convegno (Proceeding)
• Sesana, Raffaella; Santoro, Luca; Cura, Francesca; Molica Nardo, Rosario; Pagano, ... (2023)
  Assessing thermal properties of multipass weld beads using active thermography: microstructural variations and anisotropy analysis. In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY, pp. 1-12. ISSN 0268-3768
  Contributo su Rivista
• Santoro, Luca; Borghese, Vittoria; Santini, Silvia; Sesana, Raffaella; Cura, Francesca ... (2023)
  Density estimation of historical wooden elements through means of thermographic correlation approach. In: 14th International Conference on non-destructive investigations and microanalysis for the diagnostics and conservation of cultural and environmental heritage, Brescia, 28-30 Novembre 2023, pp. 1-6
  Contributo in Atti di Convegno (Proceeding)
• Cura, F M; Santoro, L; Sesana, R; Corsaro, L (2023)
  ASSESSMENTS ON MATERIAL THICKNESS AND COATING IN LASER SPOT ACTIVE THERMOGRAPHY. In: ICEM20 EXPERIMENTAL MECHANICS IN ENGINEERING AND BIOMECHANICS, Oporto, 2-7 July 2023, pp. 1051-1058. ISBN: 978-989-54756-6-7
  Contributo in Atti di Convegno (Proceeding)

• Metodologia Per Il Controllo Non Distruttivo Di Giunti Saldati Tramite Termografia Attiva. national and international Patent
  Inventors: Manuela De Maddis Valentino Razza Luca Santoro
• Metodologia di identificazione delle tensioni residue su materiali e componenti mediante tecniche di termografia attiva . national and international Patent
  Inventors: Luca Corsaro Francesca Maria Cura' Luca Santoro Raffaella Sesana