Master of Science

• Progettazione e fabbricazione additiva per applicazioni aerospaziali. A.A. 2018/19, INGEGNERIA AEROSPAZIALE. Collaboratore del corso
• Progettazione e fabbricazione additiva per applicazioni aerospaziali. A.A. 2019/20, INGEGNERIA AEROSPAZIALE. Collaboratore del corso
• Strutture aeronautiche. A.A. 2018/19, INGEGNERIA AEROSPAZIALE. Collaboratore del corso
• Strutture aeronautiche. A.A. 2019/20, INGEGNERIA AEROSPAZIALE. Collaboratore del corso

• Torre, Roberto (2021)
  Theoretical, numerical, and experimental methodologies for structural analysis of polymeric aeronautical elements produced via additive manufacturing. relatore: BRISCHETTO, SALVATORE; , 33. XXXIII Ciclo, P.: 334
  Doctoral Thesis
• Torre, Roberto; Brischetto, Salvatore (2021)
  Reinforcing effect of strain gauges on 3D printed polymers: An experimental investigation. In: AMERICAN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, vol. 14, pp. 7-24. ISSN 1941-7020
  Contributo su Rivista
• Brischetto, Salvatore; Torre, Roberto (2021)
  3D hygro-thermo-elastic analysis of functionally graded material plates and shells. In: 14th World Congress in Computational Mechanics (WCCM) ECCOMAS Congress 2020, Virtual Congress, 11-15 January 2021
  Contributo in Atti di Convegno (Proceeding)
• Torre, Roberto; Brischetto, Salvatore; Rocco Dipietro, Ivan (2021)
  Buckling developed in 3D printed PLA cuboidal samples under compression: Analytical, numerical and experimental investigations. In: ADDITIVE MANUFACTURING, vol. 38, pp. 1-14. ISSN 2214-8604
  Contributo su Rivista
• Torre, Roberto; Brischetto, Salvatore (2021)
  The Architecture of a Modular UAV with Additively Manufactured Frame: Preliminary Flight and Performance Evaluations. In: ISUDEF 2021 - International Symposium on Unmanned Systems and the Defense Industry ’21, Howard University Washington D.C., USA, 26-28 October, 2021
  Contributo in Atti di Convegno (Proceeding)
• Torre, Roberto; Brischetto, Salvatore (2021)
  Comparisons between strain gauges and digital image correlation in experimental testing of 3D printed PLA elements. In: ICCS24 24th International Conference on Composite Structures, Faculty of Engineering, University of Porto, Portugal, 14-16 June 2021
  Contributo in Atti di Convegno (Proceeding)
• Brischetto, Salvatore; Torre, Roberto (2021)
  Preliminary Finite Element Analysis and Flight Simulations of a Modular Drone Built through Fused Filament Fabrication. In: JOURNAL OF COMPOSITES SCIENCE, vol. 5, pp. 1-28. ISSN 2504-477X
  Contributo su Rivista
• Brischetto, Salvatore; Torre, Roberto (2020)
  Tensile and compressive behavior in the experimental tests for PLA specimens produced via Fused Deposition Modelling technique. In: JOURNAL OF COMPOSITES SCIENCE, vol. 4, pp. 1-25. ISSN 2504-477X
  Contributo su Rivista
• Brischetto, Salvatore; Torre, Roberto; Ferro, Carlo Giovanni (2020)
  Experimental evaluation of mechanical properties and machine process in Fused Deposition Modelling printed polymeric elements. In: AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, Washington D.C. (USA), July 24–28 2019, pp. 377-389. ISSN 2194-5357. ISBN: 978-3-030-20215-6
  Contributo in Atti di Convegno (Proceeding)
• Brischetto, Salvatore; Torre, Roberto (2020)
  An experimental comparison for compression of PLA specimens printed in in-plane and out-of-plane directions. In: AMERICAN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, vol. 13, pp. 563-583. ISSN 1941-7020
  Contributo su Rivista
• Brischetto, Salvatore; Torre, Roberto (2020)
  Honeycomb sandwich specimens made of PLA and produced via 3D FDM printing process: an experimental study. In: JOURNAL OF AIRCRAFT AND SPACECRAFT TECHNOLOGY, vol. 4, pp. 54-69. ISSN 2523-1197
  Contributo su Rivista
• Torre, Roberto; Brischetto, Salvatore (2020)
  Buckling in FDM 3D printed PLA elements: a DIC-assisted experimental investigation. In: 2020 The 4th International Conference on Materials Sciences and Nanomaterials - ICMSN 2020, Cambridge, United Kingdom, July 08-10, 2020
  Contributo in Atti di Convegno (Proceeding)
• Brischetto, Salvatore; Torre, Roberto (2020)
  A 3D shell model for the thermal and hygroscopic stress analysis of composite and sandwich structures. In: ICCS23 - 23rd International Conference on Composite Structures & MECHCOMP6 - 6th International Conference on Mechanics of Composites, Faculty of Engineering, University of Porto, Portugal, 1-4 September 2020
  Contributo in Atti di Convegno (Proceeding)
• Torre, R.; Brischetto, S.; Tornabene, F. (2019)
  Cylindrical bending in composite structures by means of analytical and numerical 2D/3D shell models. In: ICCS22 – 22nd International Conference on Composite Structures & CCCS1 - 1st Chinese Conference on Composite Structures, Wuhan (China), 31st October - 3rd November, 2019
  Contributo in Atti di Convegno (Proceeding)
• Torre, R.; Brischetto, S.; Tornabene, F. (2019)
  Analytical and semi-analytical 3D shell models for composite structures. In: MECHCOMP 2019 5th International Conference on Mechanics of Composites, Liisbon (Portugal), 1-4 July 2019, pp. 25-26
  Contributo in Atti di Convegno (Proceeding)
• Brischetto, S.; Torre, R. (2019)
  3D shell model for the thermo-mechanical analysis of FGM structures via imposed and calculated temperature profiles. In: AEROSPACE SCIENCE AND TECHNOLOGY, vol. 85, pp. 125-149. ISSN 1270-9638
  Contributo su Rivista
• Brischetto, Salvatore; Torre, Roberto (2019)
  Elementi di Sicurezza Aeronautica. Bologna, Società Editrice Esculapio s.r.l., P. 406. ISBN: 978-88-9385-135-0
  Libro
• Brischetto, Salvatore; Torre, Roberto (2018)
  Effects of order of expansion for the exponential matrix and number of mathematical layers in the exact 3D static analysis of functionally graded plates and shells. In: APPLIED SCIENCES, vol. 8, pp. 1-17. ISSN 2076-3417
  Contributo su Rivista
• Brischetto, Salvatore; Torre, Roberto (2018)
  3D thermal stress analysis in functionally graded plates and shells. In: 28th International Workshop on Computational Mechanics of Materials (IWCMM28), Glasgow (UK), 10-12 September 2018
  Contributo in Atti di Convegno (Proceeding)
• Brischetto, Salvatore; Ferro, CARLO GIOVANNI; Torre, Roberto; Maggiore, Paolo (2018)
  3D FDM production and mechanical behavior of polymeric sandwich specimens embedding classical and honeycomb cores.. In: CURVED AND LAYERED STRUCTURES, vol. 5, pp. 80-94. ISSN 2353-7396
  Contributo su Rivista