Ph.D. in Scienza E Tecnologia Dei Materiali , 29th cycle (2014-2016)
Ph.D. obtained in 2017
Dissertation:
Development and Characterisation of Aluminium Alloys and Aluminium Matrix Composites Produced via Laser Powder Bed Fusion
Tutors:
Paolo Fino Matteo PaveseProfile
Research interests
Scientific branch
(Area 0009 - Industrial and information engineering)
Teaching
Collegi of the PhD programmes
- SCIENZA E TECNOLOGIA DEI MATERIALI, 2023/2024 (40. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2022/2023 (39. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2021/2022 (38. ciclo)
Politecnico di TORINO
Collegi of the degree programmes
- Collegio di Ingegneria Chimica e dei Materiali. Componente
- Collegio di Ingegneria Elettrica ed Energetica. Componente invitato
Teachings
Bachelor of Science
- Scienza e tecnologia dei materiali funzionali. A.A. 2016/17, INGEGNERIA DEI MATERIALI. Collaboratore del corso
- Concept Design (modulo di Materiali e tecnologie per il design). A.A. 2016/17, DESIGN E COMUNICAZIONE VISIVA. Collaboratore del corso
Research
Institute
Research groups/teams
Laboratories
Research projects
Projects funded by commercial contracts
- Progettazione e realizzazione Heat Pipe con tecnologia Additive Manufacturing , (2024-2024) - Responsabile Scientifico
Commercial Research
Supervised PhD students
- Vincent Wong. Programme in Scienza E Tecnologia Dei Materiali (cycle 37, 2024-in progress)
Thesis: Fabrication of Functionally Gradient Material Components of AISI 316L and Inconel 718 using Laser Powder ¿ Directed Energy Deposition.
Publications
Last years publications
PoliTO co-authors
Publications by type
Works published during the Ph.D. View all publications in Porto@Iris
- Aversa, Alberta; Lorusso, Massimo; Cattano, Giulio; Manfredi, DIEGO GIOVANNI; Calignano, ... (2017)
A study of the microstructure and the mechanical properties of an AlSiNi alloy produced via selective laser melting. In: JOURNAL OF ALLOYS AND COMPOUNDS, vol. 695, pp. 1470-1478. ISSN 0925-8388
Contributo su Rivista - Trevisan, Francesco; Calignano, Flaviana; Lorusso, Massimo; Pakkanen, JUKKA ANTERO; ... (2017)
On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties. In: MATERIALS, vol. 10, pp. 1-23. ISSN 1996-1944
Contributo su Rivista - Aversa, Alberta; Lorusso, Massimo; Trevisan, Francesco; Ambrosio, ELISA PAOLA; ... (2017)
Effect of process and post-process conditions on the mechanical properties of an A357 alloy produced via laser powder bed fusion. In: METALS, vol. 7. ISSN 2075-4701
Contributo su Rivista - Aversa, Alberta; Moshiri, Mandana'; Tusacciu, Simona; Busatto, Mattia; Lai, Manuel; ... (2017)
A Comparison of the Laser Powder Interaction in Laser Powder Bed Fusion and Direct Energy Deposition Processes. In: Euro PM2017 Congress & Exhibition. ISBN: 978-1-899072-49-1
Contributo in Atti di Convegno (Proceeding) - Aversa, Alberta (2017)
Development and Characterisation of Aluminium Alloys and Aluminium Matrix Composites Produced via Laser Powder Bed Fusion. relatore: Prof. Paolo Fino e Prof. Matteo Pavese, 29. XXIX Ciclo
Doctoral Thesis - Aversa, Alberta; Marchese, Giulio; Lorusso, Massimo; Calignano, Flaviana; Biamino, Sara; ... (2017)
Microstructural and Mechanical Characterization of Aluminum Matrix Composites Produced by Laser Powder Bed Fusion . In: ADVANCED ENGINEERING MATERIALS. ISSN 1438-1656
Contributo su Rivista - Aversa, Alberta; Lorusso, Massimo; Manfredi, DIEGO GIOVANNI; Calignano, Flaviana; Fino, ... (2016)
SELECTIVE LASER MELTING OF ALUMINIUM MATRIX NANOCOMPOSITES. In: Forum Nazionale dei Giovani Ricercatori di Scienza e Tecnologia dei Materiali (Materiali 2016), Ischia, giugno 2016
Contributo in Atti di Convegno (Proceeding) - Librera, Erica; Aversa, Alberta; Moshiri, Mandana; Fino, Paolo; Manfredi, Diego; ... (2016)
Study of single tracks with alsi10mg and composites powders. In: World Powder Metallurgy 2016 Congress and Exhibition, World PM 2016, deu, 2016. ISSN 978-189907248-4. ISBN: 9781899072484
Contributo in Atti di Convegno (Proceeding) - Aversa, Alberta; Lorusso, Massimo; Trevisan, Francesco; Manfredi, Diego; Calignano, ... (2016)
Microstructural and mechanical properties of Al-Si-Ni alloy produced by direct metal laser sintering. In: World Powder Metallurgy 2016 Congress and Exhibition, World PM 2016, deu, 2016. ISBN: 978-189907248-4
Contributo in Atti di Convegno (Proceeding) - Aversa, Alberta; Marchese, Giulio; Lorusso, Massimo; Manfredi, DIEGO GIOVANNI; ... (2016)
Aluminium matrix nano composites by DMLS: effect of the nanoparticles on the microstructure and mechanical properties. In: DDMC 2016, Berlino, Marzo 2016
Contributo in Atti di Convegno (Proceeding) - Lorusso, Massimo; Aversa, Alberta; Manfredi, DIEGO GIOVANNI; Calignano, Flaviana; ... (2016)
Tribological Behavior of Aluminum Alloy AlSi10Mg-TiB2 Composites Produced by Direct Metal Laser Sintering (DMLS). In: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, pp. 1-9. ISSN 1059-9495
Contributo su Rivista - Aversa, Alberta; Pavese, Matteo; Manfredi, DIEGO GIOVANNI; Calignano, Flaviana; ... (2015)
Microstructural and mechanical characterization of AlSi10Mg – TiB2 composites produced by direct metal laser sintering technique. In: EuroPM2015, Reims, Ottobre 2015
Contributo in Atti di Convegno (Proceeding)