• Collegio di Ingegneria Chimica e dei Materiali. Componente invitato

Master of Science

• Ingegneria delle leghe a elevate prestazioni. A.A. 2017/18, INGEGNERIA DEI MATERIALI. Collaboratore del corso

Bachelor of Science

• Materiali metallici. A.A. 2017/18, INGEGNERIA DEI MATERIALI. Collaboratore del corso

• Institute of Science and Engineering of Materials for Innovative Technologies

• Jewelery Techonology Laboratory
• Laboratory of Environmental Simulation
• Laboratory of Heat Treatments
• Laboratory of Mechanical characterization
• Laboratory of Powder Metallurgy
• Laboratory of Tribology
• Microscopy and surface analysis Laboratory

• Gobber, F. S.; Ugues, D.; Martelli, P.; Rosso, M. (2018)
  Characterization of the resistance to thermal softening of a modified AISI H13 hot – work tool steel. In: LA METALLURGIA ITALIANA, vol. 110, pp. 23-29. ISSN 0026-0843
  Contributo su Rivista
• Gobber, F.; Pisa, A.; Ugues, D.; Lombardo, S.; Fracchia, E.; Rosso, M. (2018)
  Study of the Effect of Surface—Roughness of Dies and Tooling for HPDC on Soldering. In: TMS 2018 Annual Meeting & Exhibition, pp. 977-981. ISBN: 978-3-319-72283-2
  Contributo in Atti di Convegno (Proceeding)
• Gobber, Federico Simone; Rosso, Mario (2018)
  Study and Development of a Multilayered Coating to Improve Hard Metal Cutting Tools Performances. In: THERMEC 2018, Parigi, 09 - 13 Luglio 2018, pp. 1656-1661. ISSN 1662-9752. ISBN: 978-3-0357-1208-7
  Contributo in Atti di Convegno (Proceeding)
• Gobber, FEDERICO SIMONE (2018)
  Development of innovative TCT saw blades for high speed cutting of metallic alloys. relatore: ROSSO, MARIO; , 30. XXX Ciclo, P.: 140
  Doctoral Thesis
• Fracchia, E.; Gobber, F.; Rosso, M. (2017)
  About weldability and welding of Al alloys: case study and problem solving. In: JOURNAL OF ACHIVEMENTS IN MATERIALS AND MANUFACTURING ENGINEERING, vol. 85, pp. 67-74. ISSN 1734-8412
  Contributo su Rivista
• Lombardo, S.; Gobber, F.; Rosso, M. (2017)
  Fundamental principles for a successful collaboration between university and metalworking industries. In: 146th Annual Meeting and Exhibition Supplemental, TMS 2017, usa, 26/2-02/3/2017, pp. 803-810. ISSN 2367-1181. ISBN: 978-3-319-51492-5
  Contributo in Atti di Convegno (Proceeding)
• Rosso, M.; Lombardo, S.; Gobber, F. (2017)
  Sequential gravity casting in functionally graded aluminum alloys development. In: Light alloys / S.N., GEWERBESTRASSE 11, CHAM, CH-6330, SWITZERLAND, Springer International Publishing, pp. 877-883. ISBN: 978-3-319-51540-3
  Contributo in Volume
• Gobber, FEDERICO SIMONE; Ugues, Daniele; Pisa, ANDREA GIUSEPPE; Pellizzari, M.; ... (2016)
  Influenza della finitura superficiale sulla resistenza alla metallizzazione di un acciaio da stampi per pressocolata delle leghe di alluminio. In: 36° Convegno Nazionale AIM, Parma (Italia), 21-22-23 settembre 2016
  Contributo in Atti di Convegno (Proceeding)
• Rosso, Mario; Peter, Ildiko; Gobber, FEDERICO SIMONE (2015)
  Focus on Carbide-Tipped Circular Saws when Cutting Stainless Steel and Special Alloys. In: ADVANCED MATERIALS RESEARCH, vol. 1114, pp. 13-21. ISSN 1662-8985
  Contributo su Rivista
• Rosso, Mario; Peter, Ildiko; Gobber, FEDERICO SIMONE (2015)
  Overview of heat treatment and surface engineering. Influences of surface finishing on hot – work tool steel. In: INTERNATIONAL JOURNAL OF MICROSTRUCTURE AND MATERIALS PROPERTIES, vol. 10, pp. 3-30. ISSN 1741-8410
  Contributo su Rivista
• Peter, Ildiko; Rosso, Mario; Gobber, FEDERICO SIMONE (2015)
  Study of protective coatings for aluminum die casting molds. In: APPLIED SURFACE SCIENCE, vol. 358, pp. 563-571. ISSN 0169-4332
  Contributo su Rivista
• Rosso, Mario; Peter, Ildiko; Gobber, FEDERICO SIMONE; Montedoro, A. (2014)
  CORRELAZIONE TRA LA FINITURA SUPERFICIALE E IL MECCANISMO DI DANNEGGIAMENTO PER ACCIAI DA STAMPO. In: 35° Convegno Nazionale AIM, Roma, Roma, 5-7/1172014
  Contributo in Atti di Convegno (Proceeding)