Corso di laurea magistrale

• Sistemi di produzione innovativi. A.A. 2021/22, INGEGNERIA DELLA PRODUZIONE INDUSTRIALE E DELL'INNOVAZIONE TECNOLOGICA. Collaboratore del corso
• Sistemi di produzione innovativi. A.A. 2022/23, INGEGNERIA DELLA PRODUZIONE INDUSTRIALE E DELL'INNOVAZIONE TECNOLOGICA. Collaboratore del corso
• Sistemi di produzione innovativi. A.A. 2023/24, INGEGNERIA DELLA PRODUZIONE INDUSTRIALE E DELL'INNOVAZIONE TECNOLOGICA. Collaboratore del corso

• Lannunziata, Erika; Fiorillo, Chiara; Minetola, Paolo; Edeleva, Mariya; Cardon, Ludwig; ... (2025)
  Study of flow-induced crystallization in polyvinylidene fluoride 3D printing. In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY, pp. 1-13. ISSN 0268-3768
  Contributo su Rivista
• Lannunziata, Erika (2025)
  3D printing of semi-crystalline high-performance polymers for localized production. relatore: MINETOLA, PAOLO; SABOORI, ABDOLLAH; , 37. XXXVII Ciclo, P.: 137
  Doctoral Thesis
• Lannunziata, Erika; Minetola, Paolo; Edeleva, Mariya; Cardon, Ludwig; Iuliano, Luca (2024)
  A preliminary study on the flow-induced crystallization phenomenon in 3D printing of polyvinylidene fluoride. In: International Conference on Polymer Process Innovation (PPI 2024), Ghent (Belgio), 18-20 settembre 2024, pp. 307-310
  Contributo in Atti di Convegno (Proceeding)
• Lannunziata, Erika; Colucci, Giovanna; Minetola, Paolo; Giubilini, Alberto (2024)
  Effect of annealing treatment and infill percentage on 3D-printed PEEK samples by Fused Filament Fabrication. In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY, vol. 131, pp. 5209-5222. ISSN 0268-3768
  Contributo su Rivista
• Lannunziata, Erika; Mosallanejad, Mohammad Hossein; Galati, Manuela; Piscopo, Gabriele; ... (2024)
  Analyzing the Interplay of Sintering Conditions on Microstructure and Hardness in Indirect Additive Manufacturing of 17-4PH Stainless Steel. In: ACTA METALLURGICA SINICA. ISSN 1006-7191
  Contributo su Rivista
• Lannunziata, Erika; Giubilini, Alberto; Saboori, Abdollah; Minetola, Paolo (2023)
  Influence of Process Parameters on Compression Properties of 3D Printed Polyether-Ether-Ketone by Fused Filament Fabrication. In: Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems. FAIM 2023, Porto, Giugno, pp. 336-344. ISBN: 978-3-031-38241-3
  Contributo in Atti di Convegno (Proceeding)
• Behjat, A.; Shamanian, M.; Taherizadeh, A.; Lannunziata, E.; Bagherifard, S.; ... (2023)
  Microstructure-electrochemical behavior relationship in post processed AISI316L stainless steel parts fabricated by laser powder bed fusion. In: JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY, vol. 23, pp. 3294-3311. ISSN 2238-7854
  Contributo su Rivista
• Ghanavati, R.; Lannunziata, E.; Norouzi, E.; Bagherifard, S.; Iuliano, L.; Saboori, A. (2023)
  Design and development of SS316L-IN718 functionally graded materials via laser powder bed fusion. In: MATERIALS LETTERS, vol. 349. ISSN 0167-577X
  Contributo su Rivista
• Lannunziata, Erika; Zapparoli, Niccolò; Iuliano, Luca; Saboori, Abdollah (2023)
  Effect of powder atomising route on the surface quality and mechanical performance of AISI 316L samples produced via laser powder bed fusion process. In: CIRP, Ischia, pp. 688-693. ISSN 2212-8271
  Contributo in Atti di Convegno (Proceeding)
• Behjat, Amir; Lannunziata, Erika; Gadalinska, Elzbieta; Iuliano, Luca; Saboori, Abdollah (2023)
  Improving the surface quality and mechanical properties of additively manufactured AISI 316L stainless steel by different surface post-treatment. In: CIRP, Ischia, pp. 771-776. ISSN 2212-8271
  Contributo in Atti di Convegno (Proceeding)
• Khandpur, M. S.; Minetola, P.; Stiuso, V.; Rifuggiato, S.; Fontana, L.; Lannunziata, E.; ... (2023)
  An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data. In: Fourth International Conference on Recent Advances in Materials and Manufacturing 2022, Erode, Tamil Nadu (INDIA), 08-09/12/2022. ISSN 2214-7853
  Contributo in Atti di Convegno (Proceeding)
• Lannunziata, Erika; Saboori, Abdollah; Galati, Manuela; Iuliano, Luca (2022)
  Laser powder bed fusion of AISI 316L lattice structures for biomedical applications. In: The International Conference on Additive Manufacturing for a Better World., Singapore. ISSN 2214-7853
  Contributo in Atti di Convegno (Proceeding)
• Behjat, A.; Shamanian, M.; Taherizadeh, A.; Noori, M.; Lannunziata, E.; Iuliano, L.; ... (2022)
  Enhanced surface properties and bioactivity of additively manufactured 316L stainless steel using different post-treatments. In: The International Conference on Additive Manufacturing for a Better World, Singapore, August 2022, pp. 188-194. ISSN 2214-7853
  Contributo in Atti di Convegno (Proceeding)