• SCIENZA E TECNOLOGIA DEI MATERIALI, 2023/2024 (40. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2022/2023 (39. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2021/2022 (38. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2020/2021 (37. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2019/2020 (36. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2018/2019 (35. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2017/2018 (34. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2016/2017 (33. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2015/2016 (32. ciclo)
  Politecnico di TORINO
• SCIENZA E TECNOLOGIA DEI MATERIALI, 2014/2015 (31. ciclo)
  Politecnico di TORINO

• Collegio di Ingegneria Chimica e dei Materiali. Componente invitato
• Collegio di Ingegneria Meccanica, Aerospaziale e dell'Autoveicolo. Componente

Projects funded by commercial contracts

• Corso di formazione su Metallurgia e trattamenti termici per l’additive manufacturing metallico, (2023-2023) - Responsabile Scientifico
  Commercial contracts

• Institute of Science and Engineering of Materials for Innovative Technologies

• Additive Manufacturing
• Biomaterials
• Ceramic Materials
• Materials for high temperatures and nanocomposites
• Metallic Materials

• 3D fabrication and characterisation of functional (bio)materials
• Ceramic 3d Printing LAB
• Chemical Preparation Laboratory
• Electron mycroscopy laboratory
• Furnace Laboratory
• Granulometry Laboratory
• Infrastructure Laboratory - Interdepartmental centre SISCON (Safety of infrastructures and constructions)
• Laboratory of Thermal Analysis 4
• Metallographic Preparation Laboratory
• Processing laboratory
• Screen-Printing Laboratory
• Sensor Laboratory

Projects funded by competitive calls

• WISE - Multi-scale multi-process machine for high value-added products with disruptive functionalities , (2024-2026) - Responsabile Scientifico di Struttura
  UE-funded research - HE - Global Challenges - Digital, Industry and Space
• ALCOM - ALuminium alloy COmponents produced by additive Manufacturing: improvement of performance by multilayer coatings , (2023-2024) - Responsabile Scientifico
  PNRR – Mission 4
• OFELIA - Open Fan for Environmental Low Impact of Aviation , (2022-2025) - Responsabile Scientifico di Struttura
  UE-funded research - JTI - Clean Aviation
• Circular Tracing - Circular tracing per l’industria 5.0 , (2022-2025) - Responsabile Scientifico di Struttura
  PNRR – Complementary Plan
• CNMS - Spoke 11 - Sustainable Mobility Center (Centro Nazionale per la Mobilità Sostenibile – CNMS) - Spoke 11 , (2022-2025) - Responsabile Scientifico
  PNRR – Mission 4
• Mesomorph - all-in-one machine for hybrid technologies enabling high value added multi-scale integrated micro.optoelectronics , (2020-2023) - Responsabile Scientifico di Struttura
  UE-funded research - H2020 - Industrial Leadership – LEIT - NANOTECHNOLOGIES
• ECOFACT - ECO-innovative Energy FACTory Management System based on enhanced LCA and LCCA towards resource-efficient manufacturing , (2020-2024) - Responsabile Scientifico
  UE-funded research - H2020 - Societal Challenges - Energy
• MANUELA - DT-FOF-04-2018 , (2018-2022) - Responsabile Scientifico
  UE-funded research - H2020 - Industrial Leadership – LEIT - NANOTECHNOLOGIES
• SAX - Strumentazioni avanzate per sistemi complessi , (2018-2019) - Responsabile Scientifico
  Regionally funded research
• AMable - FOF-12-2017 , (2017-2021) - Responsabile Scientifico
  UE-funded research - H2020 - Cross-cutting activities - IND
• STAMP - Sviluppo Tecnologico dell'Additive Manufacturing in Piemonte , (2016-2019) - Responsabile Scientifico
  Regionally funded research - Piattaforme Tecnologiche

Projects funded by commercial contracts

• ottimizzazione di processo per leghe di titanio da usarsi tramite l’Additive Manufacturing, legato alla realizzazione del progetto “MAM4HP – Metal Additive Manufacturing for High Performances”, risultato finanziato nell’ambito del “Bando per la selezione di progetti di innovazione tecnologica” , (2024-2025) - Responsabile Scientifico
  Commercial Research
• Concorso al sostenimento degli oneri del Politecnico per lo sviluppo delle attività di ricerca che si realizzeranno con la costituzione dell’Osservatorio delle Innovazioni Tecnologiche, presso il DISAT (collegato all'AdP n.546/2021) , (2021-2027) - Responsabile Scientifico
  Participation in expenses for research activity
• PRODUZIONE CAMPIONI METALLICI , (2024-2024) - Responsabile Scientifico
  Commercial Research
• Messa a punto per la produzione additiva di otturatori di valvola , (2019-2019) - Responsabile Scientifico
  Commercial Research
• SOFT ARM3 - Studio di fattibilità per lo sviluppo di componenti per braccio robotizzato HT/HP , (2018-2018) - Responsabile Scientifico
  Commercial Research
• Contratto di ricerca tra Polito (DISAT) e Ge Avio avente ad oggetto "caratterizzazione dei materiali ottenuti tramite additive manufacturing al variare delle condizioni operative" , (2017-2018) - Responsabile Scientifico
  Commercial Research
• contratto di ricerca tra Polito (DISAT) e Ge Avio avente ad oggetto "studio di prototipazione di componenti tramite additive manufacturing" , (2017-2018) - Responsabile Scientifico
  Commercial Research
• Attività di ricerca a supporto del progetto Greenrail Project Sme Instruments Phase 2 - PoliTO , (2017-2018) - Responsabile Scientifico
  Commercial Research
• STUDIO DI UN SISTEMA SEMISTRUTTURALE PER LA GIUNZIONE DI METALLI E PLASTICHE PER APPLICAZIONI IN AMBITO AUTOMOTIVE , (2015-2016) - Responsabile Scientifico
  Consulting
• Studio di soluzioni innovative per il sistema ruota , (2014-2015) - Responsabile Scientifico
  Commercial Research
• Studio di sviluppo di componenti tramite additive manufacturing , (-2020) - Responsabile Scientifico
  Commercial Research

• Lorenzo Notari. Programme in Materiali, Processi Sostenibili E Sistemi Per La Transizione (cycle 39, 2023-in progress)
• Sina Rezaei. Programme in Scienza E Tecnologia Dei Materiali (cycle 39, 2023-in progress)
• Gnanesh Talur Chandrashekar. Programme in Scienza E Tecnologia Dei Materiali (cycle 39, 2023-in progress)
• Mohammad Javad Yadegari. Programme in Scienza E Tecnologia Dei Materiali (cycle 39, 2023-in progress)
  Research subject: My research focuses on developing high-performance aluminum alloys for lightweight structural applications, particularly in the mobility sector.
  
  Materials characterization / Caratterizzazione di materiali
  Additive manufacturing / Manifattura additiva
  Metals / Mettalli
  Structural materials / Materiali strutturali
  Materials characterization / Caratterizzazione di materiali
  Additive manufacturing / Manifattura additiva
  Metals / Mettalli
  Structural materials / Materiali strutturali
• Nicolo' Arcieri. Programme in Scienza E Tecnologia Dei Materiali (cycle 38, 2022-in progress)
• Mirko Trovato. Programme in Scienza E Tecnologia Dei Materiali (cycle 38, 2022-in progress)
• Ilaria Lagalante. Programme in Scienza E Tecnologia Dei Materiali (cycle 37, 2021-in progress)
  Thesis: Performance of Aluminium Lattice Structures: Interplay Between Additive Manufacturing Process, Heat Treatment Strategies, and Microstructural Control, for Room and High Temperature Applications
• Silvia Bosia. Programme in Scienza E Tecnologia Dei Materiali (cycle 36, 2020-2024)
  Thesis: Additive Manufacturing of Si-based systems
• Rosa Di Falco. Programme in Scienza E Tecnologia Dei Materiali (cycle 35, 2019-2023)
  Thesis: Metals for Additive Manufacturing
• Alessandra Martucci. Programme in Scienza E Tecnologia Dei Materiali (cycle 35, 2019-2023)
  Thesis: Development and characterisation of Al-based alloys processed by PBF-LB/M

• Di Sturco, Samuele; Marchese, Giulio; Bondioli, Federica; Lombardi, Mariangela; Ugues, ... (2025)
  Understanding the processability, microstructure, and mechanical properties of molybdenum processed by electron beam powder bed fusion. In: INTERNATIONAL JOURNAL OF REFRACTORY METALS AND HARD MATERIALS, vol. 129. ISSN 2213-3917
  Contributo su Rivista
• Aversa, Alberta; Carrozza, Alessandro; Mercurio, Vincenza; Calignano, Flaviana; Sereda, ... (2025)
  A Comparison Between the Residual Stresses of Ti6Al4V and Ti-6Al-2Sn-4Zr-6Mo Processed by Laser Powder Bed Fusion. In: MATERIALS, vol. 18. ISSN 1996-1944
  Contributo su Rivista
• Pirro, Gianluca; Martucci, Alessandra; Morri, Alessandro; Lombardi, Mariangela; ... (2025)
  A novel solution treatment and aging for powder bed fusion-laser beam Ti-6Al-2Sn-4Zr-6Mo alloy: Microstructural and mechanical characterization. In: INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, vol. 32, pp. 414-424. ISSN 1674-4799
  Contributo su Rivista
• Yadegari, Mohammad Javad; Martucci, Alessandra; Biamino, Sara; Ugues, Daniele; ... (2025)
  Aluminum Laser Additive Manufacturing: A Review on Challenges and Opportunities Through the Lens of Sustainability. In: APPLIED SCIENCES, vol. 15. ISSN 2076-3417
  Contributo su Rivista
• Martucci, A.; Iannucci, L.; Lombardi, M.; Grassini, S. (2024)
  Effect of microstructural anisotropy and heat treatment on the corrosion behaviour of additively manufactured Ti-6Al-2Sn-4Zr-6Mo alloy. In: JOURNAL OF ALLOYS AND COMPOUNDS, vol. 1008, pp. 1-9. ISSN 0925-8388
  Contributo su Rivista
• Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; ... (2024)
  Microstructural Stability of IN625 Reinforced by the Addition of TiC Produced by Laser Powder Bed Fusion after Prolonged Thermal Exposure. In: MATERIALS, vol. 17. ISSN 1996-1944
  Contributo su Rivista
• Vincic, J.; Aversa, A.; Lombardi, M.; Manfredi, D. (2024)
  Processability and Microstructural Evolution of W360 Hot Work Tool Steel by Directed Energy Deposition. In: METALS AND MATERIALS INTERNATIONAL, vol. 30, pp. 501-516. ISSN 2005-4149
  Contributo su Rivista
• Bhatt, Bhaskaranand; Martucci, Alessandra; Virgillito, Enrico; Gobber, Federico; ... (2024)
  Deciphering Microstructures and Phases of Gas-Atomised Novel Al-Fe-Si-Cr-Ni Alloys. In: METALS, vol. 14. ISSN 2075-4701
  Contributo su Rivista
• Barode, Jayant; Vayyala, Ashok; Aversa, Alberta; Yang, Luyan; Mayer, Joachim; Fino, ... (2024)
  Natural and artificial aging behaviour of Al-Cu-Mg-Ag-Ti-B (A205) alloy processed by laser powder bed fusion: Strengthening mechanisms and failure analysis. In: MATERIALS TODAY COMMUNICATIONS, vol. 39, pp. 1-14. ISSN 2352-4928
  Contributo su Rivista
• Thangamani, Geethapriyan; Felicioni, Stefano; Padovano, Elisa; Biamino, Sara; Lombardi, ... (2024)
  A Comprehensive Review of Laser Powder Bed Fusion in Jewelry: Technologies, Materials, and Post-Processing with Future Perspective. In: METALS, vol. 14. ISSN 2075-4701
  Contributo su Rivista
• Martucci, A; Gobber, F; Aversa, A; Manfredi, D; Fino, P; Lombardi, M (2023)
  Improvement in the PBF-LB/M processing of the Al-Si-Cu-Mg composition through the use of pre-alloyed powder. In: MATERIALS RESEARCH EXPRESS, vol. 10, pp. 1-18. ISSN 2053-1591
  Contributo su Rivista
• Aversa, A; Carrozza, A; Marchese, G; Felicioni, S; De Chirico, M; Lombardi, M; Bondioli, ... (2023)
  Productivity Enhancement in Directed Energy Deposition: The Oscillating Scanning Strategy Approach. In: METALS AND MATERIALS INTERNATIONAL, vol. 29, pp. 2040-2051. ISSN 1598-9623
  Contributo su Rivista
• Barode, Jayant; Vayyala, Ashok; Aversa, Alberta; Mayer, Joachim; Fino, Paolo; Manfredi, ... (2023)
  Heat Treatment of a Precipitation Hardening Aluminium Matrix Composite Processed by Additive Manufacturing. In: 5th International Conference on Light Materials - Science and Technology, Trondheim (Norway), 21-23 June 2023
  Contributo in Atti di Convegno (Proceeding)
• Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; ... (2023)
  Microstructure and heat treatment investigation of Inconel 625/TiC composite produced by Laser Powder Bed Fusion. In: Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023, Lisbon (Portugal), 1-4 October 2023
  Contributo in Atti di Convegno (Proceeding)
• Martucci, Alessandra; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela (2023)
  Effects of Stress-Relieving Temperature on Residual Stresses, Microstructure and Mechanical Behaviour of Inconel 625 Processed by PBF-LB/M. In: METALS, vol. 13. ISSN 2075-4701
  Contributo su Rivista
• Martucci, Alessandra; Tam, Eric L.; Aversa, Alberta; Lombardi, Mariangela; Nyborg, Lars (2023)
  The effect of powder reuse on the surface chemical composition of the Scalmalloy powder in Powder Bed Fusion – Laser Beam process. In: SURFACE AND INTERFACE ANALYSIS, vol. 55, pp. 388-395. ISSN 0142-2421
  Contributo su Rivista
• Barode, Jayant; Vayyala, Ashok; Virgillito, Enrico; Aversa, Alberta; Mayer, Joachim; ... (2023)
  Revisiting heat treatments for additive manufactured parts: a case study of A20X alloy. In: MATERIALS & DESIGN, vol. Volume 225. ISSN 1873-4197
  Contributo su Rivista
• Lerda, Serena; Marchese, Giulio; Bassini, Emilio; Lombardi, Mariangela; Ugues, Daniele; ... (2023)
  Understanding the microstructure and mechanical performance of heat-treated Inconel 625/TiC composite produced by laser powder bed fusion. In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 883. ISSN 0921-5093
  Contributo su Rivista
• Martucci, Alessandra; Bassini, Emilio; Lombardi, Mariangela (2023)
  Effect of Cu Content on the PBF-LB/M Processing of the Promising Al-Si-Cu-Mg Composition. In: METALS, vol. 13. ISSN 2075-4701
  Contributo su Rivista
• Bosio, F.; Lagalante, I.; Manfredi, D.; Lombardi, M. (2023)
  Bespoke multi-step homogenization heat-treatment for a laser powder bed fused AlSi10Mg4Cu alloy synthesized via in-situ alloying. In: MATERIALS CHARACTERIZATION, vol. 195. ISSN 1044-5803
  Contributo su Rivista
• Martucci, Alessandra; Aversa, Alberta; Lombardi, Mariangela (2023)
  Ongoing Challenges of Laser-Based Powder Bed Fusion Processing of Al Alloys and Potential Solutions from the Literature—A Review. In: MATERIALS, vol. 16, pp. 1-29. ISSN 1996-1944
  Contributo su Rivista

• Composite tubolar element and relevant manufacturing method. national Patent
  Inventors: Mariangela Lombardi Matteo Pavese
• In-situ synthesis, densification and shaping of non-oxide ceramics by vacuum additive manufacturing technologies. national and international Patent
  Inventors: Sara Biamino Paolo Fino Mariangela Lombardi Laura Montanaro Abdollah Saboori
• In-situ synthesis, densification and shaping of non-oxide ceramics by vacuum additive manufacturing technologies. national and international Patent
  Inventors: Sara Biamino Paolo Fino Mariangela Lombardi Laura Montanaro Abdollah Saboori
• In-situ synthesis, densification and shaping of non-oxide ceramics by vacuum additive manufacturing technologies. national and international Patent
  Inventors: Sara Biamino Paolo Fino Mariangela Lombardi Laura Montanaro Abdollah Saboori