Docente esterno e/o collaboratore didattico
Dipartimento di Ingegneria Gestionale e della Produzione (DIGEP)
- Componente Centro Interdipartimentale J-Tech@PoliTO
Profilo
Interessi di ricerca
Biografia
Vincenzo Lunetto received the PhD in “Management, Production and Design” in 2021 at Politecnico di Torino, Italy. He is currently an assistant professor of Manufacturing Technologies and Systems from the Department of Management and Production Engineering of Politecnico di Torino. He is a member of the research center J-Tech@PoliTO Advanced Joining Technologies at Politecnico di Torino. His current research interests aim to study joining technologies with a focus on friction stir welding of high strength alloys.
Curriculum
Linee di ricerca
- Energy characterization of manufacturing systems, focus on additive manufacturing technologies
- Simulation, experimentation and optimization of semisolid and liquid joining processes
Competenze
Settori ERC
SDG
Partecipazioni scientifiche
- Socio effettivo o corrispondente - AITEM - Associazione Italiana delle Tecnologie Manifatturiere, Italia (2022-)
Altri incarichi di ricerca o didattica esterni
- Visiting Researcher, presso University of New South Wales (1/10/2019-30/6/2020)
- Professore a contratto, presso Libera Università di BOLZANO (28/3/2018-28/2/2019)
Didattica
Insegnamenti
Corso di laurea magistrale
- Analisi e gestione dei sistemi produttivi. A.A. 2020/21, INGEGNERIA GESTIONALE. Collaboratore del corso
Corso di laurea di 1° livello
- Project Work. A.A. 2024/25, TECNOLOGIE PER L'INDUSTRIA MANIFATTURIERA. Collaboratore del corso
- Manufacturing and assembly technologies. A.A. 2023/24, INGEGNERIA DELL'AUTOVEICOLO (AUTOMOTIVE ENGINEERING). Collaboratore del corso
- Manufacturing processes. A.A. 2023/24, INGEGNERIA MECCANICA (MECHANICAL ENGINEERING). Collaboratore del corso
- Project Work. A.A. 2023/24, TECNOLOGIE PER L'INDUSTRIA MANIFATTURIERA. Collaboratore del corso
- Manufacturing processes. A.A. 2022/23, INGEGNERIA MECCANICA (MECHANICAL ENGINEERING). Collaboratore del corso
- Sistemi di produzione. A.A. 2022/23, INGEGNERIA GESTIONALE. Collaboratore del corso
- Project Work. A.A. 2022/23, TECNOLOGIE PER L'INDUSTRIA MANIFATTURIERA (CORSO PROFESSIONALIZZANTE). Collaboratore del corso
- Laboratorio di Materiali e Tecnologie per processi manifatturieri. A.A. 2021/22, TECNOLOGIE PER L'INDUSTRIA MANIFATTURIERA (CORSO PROFESSIONALIZZANTE). Collaboratore del corso
- Project Work. A.A. 2021/22, TECNOLOGIE PER L'INDUSTRIA MANIFATTURIERA (CORSO PROFESSIONALIZZANTE). Collaboratore del corso
- Manufacturing processes. A.A. 2021/22, INGEGNERIA MECCANICA (MECHANICAL ENGINEERING). Collaboratore del corso
- Manufacturing and assembly technologies. A.A. 2021/22, INGEGNERIA DELL'AUTOVEICOLO (AUTOMOTIVE ENGINEERING). Collaboratore del corso
- Sistemi di produzione. A.A. 2021/22, INGEGNERIA GESTIONALE. Collaboratore del corso
- Manufacturing processes. A.A. 2020/21, INGEGNERIA MECCANICA (MECHANICAL ENGINEERING). Collaboratore del corso
- Sistemi di produzione. A.A. 2020/21, INGEGNERIA GESTIONALE. Collaboratore del corso
Pubblicazioni
Pubblicazioni degli ultimi anni
Coautori PoliTO
Pubblicazioni per tipo
Pubblicazioni più recenti Vedi tutte le pubblicazioni su Porto@Iris
- Antonioni, Paolo; Lunetto, Vincenzo; Galati, Manuela (2025)
A novel methodology for predicting energy and time consumption in additive manufacturing powder bed fusion with electron beam system using neural network. In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. ISSN 0268-3768
Contributo su Rivista - Lunetto, Vincenzo; De Maddis, Manuela; Lombardi, Franco; Russo Spena, Pasquale (2025)
A Review of Friction Stir Welding of Industrial Alloys: Tool Design and Process Parameters. In: JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, vol. 9. ISSN 2504-4494
Contributo su Rivista - Lunetto, Vincenzo; Galati, Manuela; Minetola, Paolo; Priarone, Paolo C. (2024)
On the modelling of the specific energy consumption for the continuous fibre fabrication of composite materials. In: PROGRESS IN ADDITIVE MANUFACTURING. ISSN 2363-9512
Contributo su Rivista - Abankar, Mohammad; Lunetto, Vincenzo; De Maddis, Manuela; Lombardi, Franco; Razza, ... (2024)
Friction stir welding of laser-powder bed fusion A20X: microstructure and mechanical properties. In: PERIODICA POLYTECHNICA. MECHANICAL ENGINEERING. ISSN 0324-6051
Contributo su Rivista - Abankar, Mohammad; Lunetto, Vincenzo; De Maddis, Manuela; Russo Spena, Pasquale (2024)
Friction stir welding of additively manufactured A20X aluminum alloy: welding process, mechanical properties, and microstructure. In: THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. ISSN 1433-3015
Contributo su Rivista - Lunetto, Vincenzo; Basile, Dario; Razza, Valentino; RUSSO SPENA, Pasquale (2024)
Active and Passive Filling Stir Repairing of AISI 304 Alloy. In: METALS, vol. 14. ISSN 2075-4701
Contributo su Rivista - Mirandola, Pietro; Novel, David; Perini, Matteo; Benedetti, Matteo; Lombardi, Franco; ... (2024)
Microstructures and mechanical properties of friction stir welded additively manufactured Scalmalloy®. In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. ISSN 0268-3768
Contributo su Rivista - Orlando, Mattia; De Maddis, Manuela; Razza, Valentino; Lunetto, Vincenzo (2024)
Non-destructive detection and analysis of weld defects in dissimilar pulsed GMAW and FSW joints of aluminium castings and plates through 3D X-ray computed tomography. In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. ISSN 0268-3768
Contributo su Rivista - Mirandola, Pietro; Lunetto, Vincenzo; Novel, David; Barozzi, Mario; Bellutti, Pierluigi; ... (2023)
Strength and microstructure of friction stir welded additively manufactured Scalmalloy® in as-welded and heat-treated conditions. In: JOURNAL OF MANUFACTURING PROCESSES, vol. 97, pp. 1-11. ISSN 1526-6125
Contributo su Rivista - Lunetto, Vincenzo; De Maddis, Manuela; Russo Spena, Pasquale (2023)
Pre-hole friction stir spot welding of dual-phase steels and comparison with resistance spot welding, conventional and pinless friction stir spot welding. In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. ISSN 0268-3768
Contributo su Rivista - Lunetto, Vincenzo; Galati, Manuela; Settineri, Luca; Iuliano, Luca (2023)
Sustainability in the manufacturing of composite materials: A literature review and directions for future research. In: JOURNAL OF MANUFACTURING PROCESSES, vol. 85, pp. 858-874. ISSN 1526-6125
Contributo su Rivista - Lunetto, Vincenzo; DE MADDIS, Manuela; RUSSO SPENA, Pasquale (2023)
Similar and dissimilar lap friction stir welding of titanium alloys: on the elimination of the hook defect. In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY. ISSN 0268-3768
Contributo su Rivista - Maisano, Domenico A.; Verna, Elisa; Minetola, Paolo; Lunetto, Vincenzo; Catalano, ... (2022)
A structured comparison of decentralized additive manufacturing centers based on quality and sustainability. In: INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY, vol. 121, pp. 993-1014. ISSN 0268-3768
Contributo su Rivista - Faveto, Alberto; Serio, Francesco; Lunetto, Vincenzo; Chiabert, Paolo (2022)
Methodology for Commodity Cost Estimation Through Production Line Analysis and Simulation. In: 18th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2021, 2021, pp. 28-43. ISSN 1868-4238. ISBN: 978-3-030-94334-9
Contributo in Atti di Convegno (Proceeding) - De Maddis, M.; Lunetto, V.; Razza, V.; Russo Spena, P. (2022)
Infrared Thermography for Investigation of Surface Quality in Dry Finish Turning of Ti6Al4V. In: METALS, vol. 12. ISSN 2075-4701
Contributo su Rivista - Maisano, Domenico A.; Verna, Elisa; Minetola, Paolo; Lunetto, Vincenzo; Priarone, PAOLO ... (2022)
Quality and sustainability benchmarking of decentralized additive manufacturing processes. In: AITeM 2021 - XV Convegno dell’Associazione Italiana Tecnologie Manifatturiere, Milano (Italy), 17-19 January 2022
Contributo in Atti di Convegno (Proceeding) - Galati, Manuela; Lunetto, Vincenzo; Imbriglio, Luca; Iuliano, Luca; Settineri, Luca (2022)
Unit process energy consumption analysis and models for electron beam powder bed fusion (EB-PBF): Effects of chamber saturation. In: The International Conference on Additive Manufacturing for a Better World (AMBW 2022), Singapore, 23-25 August 2022, pp. 401-406. ISSN 2214-7853
Contributo in Atti di Convegno (Proceeding) - Lunetto, Vincenzo; Catalano, Angioletta R.; Priarone, Paolo C.; Salmi, Alessandro; ... (2021)
Additive manufacturing for an urban vehicle prototype: re-design and sustainability implications. In: 14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME ’20, Ischia, Gulf of Naples, Italy, 15-17 July 2020, pp. 364-369. ISSN 2212-8271
Contributo in Atti di Convegno (Proceeding) - Lunetto, Vincenzo (2021)
Energy efficiency and circular economy implications of additive manufacturing. relatore: SETTINERI, LUCA; PRIARONE, PAOLO CLAUDIO; , 33. XXXIII Ciclo, P.: 175
Doctoral Thesis - Lunetto, Vincenzo; Priarone, Paolo C.; Kara, Sami; Settineri, Luca (2021)
A comparative LCA method for environmentally friendly manufacturing: Additive manufacturing versus Machining case. In: 28th CIRP Life Cycle Engineering (LCE) Conference, Jaipur (India), 10-12 March 2021, pp. 406-411. ISSN 2212-8271
Contributo in Atti di Convegno (Proceeding) - Davis, William; Lunetto, Vincenzo; Priarone, Paolo C.; Centea, Dan; Settineri, Luca (2020)
An appraisal on the sustainability payback of additively manufactured molds with conformal cooling. In: 27th CIRP Life Cycle Engineering (LCE) Conference, Grenoble, France, from 13 May 2020 through 15 May 2020, pp. 516-521. ISSN 2212-8271
Contributo in Atti di Convegno (Proceeding) - Lunetto, V.; Priarone, P. C.; Galati, M.; Minetola, P. (2020)
On the correlation between process parameters and specific energy consumption in fused deposition modelling. In: JOURNAL OF MANUFACTURING PROCESSES, vol. 56, pp. 1039-1049. ISSN 1526-6125
Contributo su Rivista - Lunetto, V.; Galati, M.; Settineri, L.; Iuliano, L. (2020)
Unit process energy consumption analysis and models for Electron Beam Melting (EBM): Effects of process and part designs. In: ADDITIVE MANUFACTURING, vol. 33. ISSN 2214-8604
Contributo su Rivista - Catalano, A. R.; Lunetto, V.; Priarone, P. C.; Settineri, L. (2019)
A survey on energy efficiency in metal wire deposition processes. In: 6th KES International Conference on Sustainable Design and Manufacturing, KES-SDM 2019, Budapest, Hungary, July 4-5, 2019, pp. 311-322. ISSN 2190-3018. ISBN: 978-981-13-9270-2
Contributo in Atti di Convegno (Proceeding) - Lunetto, Vincenzo; Catalano, ANGIOLETTA RITA; Priarone, Paolo C.; Settineri, Luca (2019)
Comments About the Human Health Risks Related to Additive Manufacturing. In: 5th International Conference on Sustainable Design and Manufacturing (KES-SDM-18), Gold Coast (Australia), June 24-26, 2018, pp. 95-104. ISSN 2190-3018. ISBN: 978-3-030-04289-9
Contributo in Atti di Convegno (Proceeding) - Priarone, Paolo C.; Lunetto, Vincenzo; Atzeni, Eleonora; Salmi, Alessandro (2018)
Laser powder bed fusion (L-PBF) additive manufacturing: On the correlation between design choices and process sustainability. In: 6th CIRP Global Web Conference “Envisaging the future manufacturing, design, technologies and systems in innovation era”, Shantou (China), October 23-25, 2018, pp. 85-90. ISSN 2212-8271
Contributo in Atti di Convegno (Proceeding) - Lunetto, V.; Priarone, P. C. (2018)
Post-processing di materie plastiche e tecnologie di giunzione. In: Scuola AIM 2018 (Associazione Italiana di Scienza e Tecnologia delle Macromolecole): Processing di Materiali Polimerici / Bongiovanni R., Aglietto M., Filippini Fantoni R., Torino, Diderotiana Editrice, pp. 345-358. ISBN: 978-88-85787-07-0
Contributo in Volume - Priarone, Paolo C.; Ingarao, Giuseppe; Lunetto, Vincenzo; Di Lorenzo, Rosa; Settineri, ... (2018)
The Role of re-design for Additive Manufacturing on the Process Environmental Performance. In: 25th CIRP Life Cycle Engineering (LCE) Conference, Copenhagen, Denmark, 30 April – 2 May 2018, pp. 124-129. ISSN 2212-8271
Contributo in Atti di Convegno (Proceeding)