Ricercatore a tempo determinato Legge 240/10 art.24-b
Dipartimento Energia (DENERG)
- Componente Centro Interdipartimentale PEIC - Power Electronics Innovation Center
Profilo
Interessi di ricerca
Biografia
Sandro Rubino (S’16, M’18) received the M.Sc. and Ph.D. degrees in Electrical Engineering from Politecnico di Torino, Torino, Italy, in 2014 and 2019, respectively. He is currently Assistant Professor with Dipartimento Energia “G. Ferraris,” Politecnico di Torino. He serves as a reviewer for some IEEE Transactions and international conferences. His main research interests include power electronics, modeling, and control of multiphase electrical machines and high-performance ac motor drives. Dr Rubino is an Associate Editor of IEEE Transactions on Industry Applications on behalf of the Industrial Drive Committee of the IEEE Industry Applications Society. He was the recipient of four paper awards from the Industrial Drives Committee of the IEEE Industry Applications Society and two Ph.D. thesis awards from the IEEE Power & Energy Society Italy Chapter and the IEEE Industrial Electronics Society Italy Chapter, respectively.
Curriculum
Settore scientifico discliplinare
(Area 0009 - Ingegneria industriale e dell'informazione)
Linee di ricerca
- Design and Development of High-Performance Torque Controllers for Electrically Excited Synchronous Motors
- Design and Development of High-Performance Torque Controllers for Induction Motors
- Design and Development of High-Performance Torque Controllers for Multi-Three-Phase Electrically Excited Synchronous Motors
- Design and Development of High-Performance Torque Controllers for Permanently Excited Synchronous Motors
- Design and Development of Modular Torque Controllers for Multi-Three-Phase Induction Motors
- Design and Development of Modular Torque Controllers for Multi-Three-Phase Permanently Excited Synchronous Motors
Competenze
Settori ERC
SDG
Premi e riconoscimenti
- IAS-IDC ECCE Prize Paper Award conferito da IEEE Transactions on Industry Applications, Stati Uniti (2024)
- IAS-IDC Transactions Paper Award conferito da Industrial Drives Committee (IDC) della IEEE Industry Applications Society (IAS), Stati Uniti (2024)
- IAS-IDC ECCE Prize Paper Award conferito da IEEE Transactions on Industry Applications, Stati Uniti (2022)
- IEEE Italy Section Industrial Electronics (IES) Chapter – Best PhD Thesis Award conferito da IEEE Italy Section Industrial Electronics (IES) Chapter, Italia (2021)
- IAS-IDC ECCE Prize Paper Award conferito da IEEE Transactions on Industry Applications, Stati Uniti (2020)
- IEEE Italy Section Power and Energy Society (PES) Chapter – Best PhD Thesis Award conferito da IEEE Italy Section Power and Energy Society (PES), Italia (2020)
Partecipazioni scientifiche
- Socio effettivo o corrispondente - Institute of Electrical and Electronics Engineers (IEEE), Stati Uniti (2018-)
Comitati editoriali
- IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2024-), Associate Editor di rivista o collana editoriale
- IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2024-), Guest Editor di rivista o collana editoriale
Didattica
Collegi dei Corsi di Studio
- Collegio di Ingegneria Elettrica. Componente invitato
- Collegio di Ingegneria Informatica, del Cinema e Meccatronica. Componente
- Collegio di Ingegneria Meccanica, Aerospaziale e dell'Autoveicolo. Componente invitato
Insegnamenti
Dottorato di ricerca
- Advanced electric drives: modeling, design, and implementation. A.A. 2022/23, INGEGNERIA ELETTRICA, ELETTRONICA E DELLE COMUNICAZIONI. Titolare del corso
Corso di laurea magistrale
- Electric Motor Drives for ePowertrains. A.A. 2024/25, MECHATRONIC ENGINEERING (INGEGNERIA MECCATRONICA). Titolare del corso
- Electrical drives for eMobility. A.A. 2024/25, AUTOMOTIVE ENGINEERING (INGEGNERIA DELL'AUTOVEICOLO). Collaboratore del corso
- Electric Motor Drives for ePowertrains. A.A. 2023/24, MECHATRONIC ENGINEERING (INGEGNERIA MECCATRONICA). Titolare del corso
- Propulsion of Hybrid and Electric Vehicles. A.A. 2023/24, INGEGNERIA ELETTRICA. Collaboratore del corso
- Electrical drives for eMobility. A.A. 2023/24, AUTOMOTIVE ENGINEERING (INGEGNERIA DELL'AUTOVEICOLO). Collaboratore del corso
- Propulsion of Hybrid and Electric Vehicles. A.A. 2022/23, INGEGNERIA ELETTRICA. Collaboratore del corso
- Electrical drives for eMobility. A.A. 2022/23, AUTOMOTIVE ENGINEERING (INGEGNERIA DELL'AUTOVEICOLO). Collaboratore del corso
- Electrical drives for eMobility. A.A. 2021/22, MECHATRONIC ENGINEERING (INGEGNERIA MECCATRONICA). Collaboratore del corso
- Power Electronics for e-Mobility. A.A. 2021/22, INGEGNERIA ELETTRICA. Collaboratore del corso
- Electrical drives for eMobility. A.A. 2021/22, AUTOMOTIVE ENGINEERING (INGEGNERIA DELL'AUTOVEICOLO). Collaboratore del corso
- Electrical drives for eMobility. A.A. 2020/21, AUTOMOTIVE ENGINEERING (INGEGNERIA DELL'AUTOVEICOLO). Collaboratore del corso
- Electrical drives for eMobility. A.A. 2020/21, AUTOMOTIVE ENGINEERING (INGEGNERIA DELL'AUTOVEICOLO). Collaboratore del corso
- Laboratory of Power Converters and Electrical Drives. A.A. 2019/20, INGEGNERIA ELETTRICA. Collaboratore del corso
Corso di laurea di 1° livello
- Macchine elettriche. A.A. 2024/25, INGEGNERIA ELETTRICA. Collaboratore del corso
- Elettrotecnica/Macchine elettriche (modulo di Macchine elettriche). A.A. 2024/25, INGEGNERIA MECCANICA. Titolare del corso
- Macchine elettriche. A.A. 2023/24, INGEGNERIA ELETTRICA. Collaboratore del corso
- Fondamenti di azionamenti elettrici. A.A. 2022/23, INGEGNERIA ELETTRICA. Collaboratore del corso
- Macchine elettriche. A.A. 2022/23, INGEGNERIA ELETTRICA. Collaboratore del corso
- Fondamenti di azionamenti elettrici. A.A. 2021/22, INGEGNERIA ELETTRICA. Collaboratore del corso
- Macchine elettriche. A.A. 2021/22, INGEGNERIA ELETTRICA. Collaboratore del corso
- Fondamenti di azionamenti elettrici. A.A. 2020/21, INGEGNERIA ELETTRICA. Collaboratore del corso
- Macchine elettriche. A.A. 2020/21, INGEGNERIA ELETTRICA. Collaboratore del corso
- Fondamenti di azionamenti elettrici. A.A. 2019/20, INGEGNERIA ELETTRICA. Collaboratore del corso
Ricerca
Gruppi di ricerca
Progetti di ricerca
Progetti finanziati da bandi competitivi
- TEAMING - e-powerTrain prEdictive mAintenance using physics inforMed learnING, (2023-2027) - Componente gruppo di Ricerca
Ricerca UE - HE - Excellent Science - MSCA - SUPERDRIVE - Superconductive Synchronous Machine Drives for High-Power Applications, (2023-2025) - Componente gruppo di Ricerca
PNRR – Missione 4 - SEMDY - Sustainable and Efficient Motor Drive System for E-mobility Applications (SEMDY), (2022-2025) - Responsabile Scientifico
Ricerca Internazionale non UE
Progetti finanziati da contratti commerciali
- Identificazione dei parametri di un motore ad induzione impiegato in applicazioni di pompe a vuoto, (2024-2024) - Responsabile Scientifico
Consulenza commerciale - Contratto di ricerca tra il Politecnico (DENERG) e Fincantieri S.p.A. per la realizzazione del Progetto di Ricerca “Electric Motor Drivers Design” , (2023-2024) - Responsabile Scientifico
Ricerca Commerciale - Sviluppo di una procedura di testing e relativa analisi per l’identificazione magnetica delle macchine elettriche sincrone con particolare riferimento a quelle IPM, (2023-2023) - Componente gruppo di Ricerca
Consulenza commerciale - Robust Direct Flux Control (DFC) algorithms for Permanent Magnet-assisted Synchronous Reluctance-(PM-SyR) motors and Synchronous Reluctance (SyR) motors for fan drive applications, (2021-2022) - Responsabile Scientifico
Consulenza commerciale - Contratto su BAndo V-IR.Controllo diretto di flusso per motori ad induzione impiegati in applicazioni di pompe a vuoto, (2021-2021) - Responsabile Scientifico
Consulenza commerciale - Robust starting closed loop control for IPM synchronous motor system and self-commissioned Direct Flux Control (DFC) algorithms for Synchronous Reluctance (SynchRel) motors for fan drive applications, (2020-2021) - Responsabile Scientifico
Consulenza commerciale - Testing di motori elettrici, (2020-2021) - Personale interno di riferimento
Consulenza commerciale
Dottorandi
- Alessandro Ionta. Corso in Ingegneria Elettrica, Elettronica E Delle Comunicazioni (38o ciclo, 2022-in corso)
- Luisa Tolosano. Corso in Ingegneria Elettrica, Elettronica E Delle Comunicazioni (37o ciclo, 2021-in corso)
Argomento della ricerca: Sviluppo di tecniche modulari per il controllo di coppia di macchine sincrone multi-trifase
Power systems, Power converters, Electrical machines and drives Power systems, Power converters, Electrical machines and drives
Pubblicazioni
Coautori PoliTO
Pubblicazioni degli ultimi anni
Pubblicazioni per tipo
Pubblicazioni degli ultimi anni Vedi tutte le pubblicazioni su Porto@Iris
- Armando, Eric; Boglietti, Aldo; Mandrile, Fabio; Carpaneto, Enrico; Rubino, Sandro (2024)
A Detailed Analysis and Guidelines for the Induction Motor Flux-Decay Test. In: IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, pp. 1-9. ISSN 0093-9994
Contributo su Rivista - Tolosano, L.; Rubino, S.; Bojoi, R. (2024)
A Comprehensive Voltage-Behind-Reactance Model of Twelve-Phase Synchronous Motors. In: 22nd IEEE Mediterranean Electrotechnical Conference, MELECON 2024, Porto, 2024, pp. 1246-1251. ISBN: 979-8-3503-8702-5
Contributo in Atti di Convegno (Proceeding) - Bianco, Ettore; Rubino, Sandro; Carello, Massimiliana; Bojoi, Iustin Radu (2024)
Advanced Torque Control of Interior Permanent Magnet Motors for Electrical Hypercars. In: WORLD ELECTRIC VEHICLE JOURNAL, vol. 15. ISSN 2032-6653
Contributo su Rivista - Rubino, Sandro; Mandrile, Fabio; Tolosano, Luisa; Armando, Eric; Bojoi, Radu (2023)
An Experimental Test Procedure for Magnetic Model Identification of Multi-Three-Phase Induction Motors. In: 2023 IEEE International Electric Machines & Drives Conference (IEMDC), San Francisco, CA, USA, 15-18 May 2023, pp. 1-7. ISBN: 979-8-3503-9899-1
Contributo in Atti di Convegno (Proceeding) - Stella, Fausto; Pellegrino, Gianmario; Rubino, Sandro; Armando, Eric (2023)
Mitigation of the Performance Derating in SiC Motor Drive Inverters Operating at Low Output Current Frequency. In: 2023 IEEE Energy Conversion Congress and Exposition (ECCE), Nashville, TN, USA, 29 Ottobre - 2 Novembre 2023, pp. 4918-4924. ISBN: 979-8-3503-1644-5
Contributo in Atti di Convegno (Proceeding) - Rubino, S.; Mandrile, F.; Armando, E.; Boglietti, A.; Bojoi, R.; Carlsson, Andreas; ... (2023)
Impedance-Based Estimation Method of PWM-Induced Losses for Traction Motors. In: 2023 IEEE International Electric Machines & Drives Conference (IEMDC), San Francisco, CA, USA, 15-18 May 2023, pp. 1-6. ISBN: 979-8-3503-9899-1
Contributo in Atti di Convegno (Proceeding) - Rubino, Sandro; Tolosano, Luisa; Mandrile, Fabio; Armando, ERIC GIACOMO; Bojoi, IUSTIN ... (2023)
Flux Polar Control (FPC): a Unified Torque Controller for AC Motor Drives. In: IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, pp. 1-21. ISSN 0093-9994
Contributo su Rivista - Rubino, Sandro; Tolosano, Luisa; Mandrile, Fabio; Ferrari, Simone; Armando, Eric; Bojoi, ... (2023)
Magnetic Model Identification of Multi-Three-Phase Synchronous Motors. In: 2023 IEEE Energy Conversion Congress and Exposition (ECCE), Nashville, TN, USA, 29 October 2023 - 02 November 2023, pp. 4775-4782. ISBN: 979-8-3503-1644-5
Contributo in Atti di Convegno (Proceeding) - Tolosano, Luisa; Armando, Eric; Rubino, Sandro; Mandrile, Fabio; Bojoi, Radu (2023)
Modular Torque Control of Multi-Three-Phase Synchronous Motor Drives. In: 2023 IEEE Energy Conversion Congress and Exposition (ECCE), Nashville, TN, USA, 29 October 2023 - 02 November 2023, pp. 4742-4749. ISBN: 979-8-3503-1644-5
Contributo in Atti di Convegno (Proceeding) - Armando, E.; Boglietti, A.; Mandrile, F.; Rubino, S. (2022)
Torque Control Accuracy Using Different Techniques for Determination of Induction Motor Rotor Time Constant. In: 2022 International Conference on Electrical Machines (ICEM), pp. 572-578. ISBN: 978-1-6654-1432-6
Contributo in Atti di Convegno (Proceeding) - Tolosano, Luisa; Armando, Eric; Rubino, Sandro; Mandrile, Fabio; Bojoi, Radu (2022)
Experimental Identification of Induction Machine Flux Maps for Traction Applications. In: 2022 IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, Michigan, USA, 09-13 Ottobre 2022, pp. 1-8. ISBN: 978-1-7281-9387-8
Contributo in Atti di Convegno (Proceeding) - Armando, Eric; Boglietti, Aldo; Mandrile, Fabio; Carpaneto, Enrico; Rubino, Sandro (2022)
A Detailed Analysis of the Electromagnetic Phenomena Observed During the Flux-Decay Test. In: 2022 International Conference on Electrical Machines (ICEM), pp. 767-773. ISBN: 978-1-6654-1432-6
Contributo in Atti di Convegno (Proceeding) - Stiscia, Ornella; Rubino, Sandro; Vaschetto, Silvio; Cavagnino, Andrea; Tenconi, Alberto (2022)
Accurate Induction Machines Efficiency Mapping Computed by Standard Test Parameters. In: IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS. ISSN 0093-9994
Contributo su Rivista - Stiscia, O.; Biasion, M.; Rubino, S.; Vaschetto, S.; Tenconi, A.; Cavagnino, A. (2022)
Iron Losses and Parameters Investigation of Multi-Three-Phase Induction Motors in Normal and Open-Phase Fault Conditions. In: 2022 International Conference on Electrical Machines (ICEM), Valencia, Spagna, 05-08 September 2022, pp. 793-799. ISBN: 978-1-6654-1432-6
Contributo in Atti di Convegno (Proceeding) - Rubino, Sandro; Mandrile, Fabio; Armando, ERIC GIACOMO; Bojoi, IUSTIN RADU; Zarri, Luca (2022)
Fault-Tolerant Torque Controller Based on Adaptive Decoupled Multi-Stator Modeling for Multi-Three-Phase Induction Motor Drives. In: IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, pp. 1-16. ISSN 0093-9994
Contributo su Rivista - Rubino, S.; Armando, E.; Bojoi, R.; Zarri, L. (2021)
Fault-Tolerant Torque Control Based on Common and Differential Mode Modeling for Multi-Three-Phase Induction Machines. In: 2021 IEEE International Electric Machines and Drives Conference, IEMDC 2021, USA, 2021, pp. 1-8. ISBN: 978-1-6654-0510-2
Contributo in Atti di Convegno (Proceeding) - Armando, E.; Boglietti, A.; Mandrile, F.; Carpaneto, E.; Rubino, S.; Nair, D. G. (2021)
Definition and Experimental Validation of a Second-Order Thermal Model for Electrical Machines. In: IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, vol. 57, pp. 5969-5982. ISSN 0093-9994
Contributo su Rivista - Rubino, Sandro; Mandrile, Fabio; Tolosano, Luisa; Armando, Eric; Bojoi, Radu (2021)
Direct Flux and Load Angle Vector Control of Permanent Magnet Synchronous Motors. In: 2021 IEEE Energy Conversion Congress and Exposition (ECCE), Vancouver, BC, Canada, 10-14 Oct. 2021, pp. 4668-4675. ISBN: 978-1-7281-5135-9
Contributo in Atti di Convegno (Proceeding) - Boglietti, A.; Mandrile, F.; Carpaneto, E.; Popescu, M.; Rubino, S.; Staton, D. (2021)
Stator winding second-order thermal model including end-winding thermal effects. In: ENERGIES, vol. 14. ISSN 1996-1073
Contributo su Rivista - Rubino, S.; Dordevic, O.; Armando, E.; Bojoi, I. R.; Levi, E. (2021)
A Novel Matrix Transformation for Decoupled Control of Modular Multiphase PMSM Drives. In: IEEE TRANSACTIONS ON POWER ELECTRONICS, vol. 36, pp. 8088-8101. ISSN 0885-8993
Contributo su Rivista - Odhano, Shafiq; Rubino, Sandro; Tang, Mi; Zanchetta, Pericle; Bojoi, Radu (2021)
Stator Current-Sensorless Modulated Model Predictive Direct Power Control of a DFIM with Magnetizing Characteristic Identification. In: IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS, vol. 9, pp. 2797-2806. ISSN 2168-6777
Contributo su Rivista - Mallemaci, Vincenzo; Mandrile, Fabio; Rubino, Sandro; Mazza, Andrea; Carpaneto, Enrico; ... (2021)
A comprehensive comparison of Virtual Synchronous Generators with focus on virtual inertia and frequency regulation. In: ELECTRIC POWER SYSTEMS RESEARCH, vol. 201, pp. 1-13. ISSN 0378-7796
Contributo su Rivista - Cittanti, Davide; Mallemaci, Vincenzo; Mandrile, Fabio; Rubino, Sandro; Bojoi, Radu; ... (2021)
PWM-Induced Losses in Electrical Machines: An Impedance-Based Estimation Method. In: 2021 24th International Conference on Electrical Machines and Systems (ICEMS), pp. 548-553. ISBN: 978-8-9865-1021-8
Contributo in Atti di Convegno (Proceeding) - Armando, E.; Boglietti, A.; Musumeci, S.; Rubino, S. (2021)
Flux-Decay Test: A Viable Solution to Evaluate the Induction Motor Rotor Time-Constant. In: IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, vol. 57, pp. 3619-3631. ISSN 0093-9994
Contributo su Rivista - Martinello, Daniele; Rubino, Sandro; Bojoi, Radu (2021)
An eDrive-Based Estimation Method of the Laundry Unbalance and Laundry Inertia for Washing Machine Applications. In: ENERGIES, vol. 14. ISSN 1996-1073
Contributo su Rivista - Armando, Eric; Boglietti, Aldo; Musumeci, Salvatore; Rubino, Sandro; Carpaneto, Enrico; ... (2021)
A Test Procedure to Evaluate Magnets Thermal Time Constant of Permanent Magnet Machines. In: IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, vol. 57, pp. 4694-4706. ISSN 0093-9994
Contributo su Rivista
Società e imprese
Brevetti e altre proprietà intellettuali
- METODO DI CONTROLLO DI COPPIA DI MACCHINE ELETTRICHE IN CORRENTE ALTERNATA TRIFASE MEDIANTE CONTROLLO POLARE DI FLUSSO. Brevetto nazionale e internazionale
Inventori: Eric Giacomo Armando Iustin Radu Bojoi Fabio Mandrile Sandro Rubino