Full Professor
Department of Applied Science and Technology (DISAT)
Profile
Research interests
Biography
Sabrina Grassini received the M.S. degree in Chemistry from the University of Torino (Italy) in 1999 and the PhD in Metallurgical Engineering at Politecnico di Torino (Italy) in 2004. She is Associate Professor of Applied Physical Chemistry (ING-IND/23) at the Department of Applied Science and Technology, Politecnico di Torino (Italy). She teaches “Chemistry” and “Corrosion and protection of materials” and she has been member of the Advisory Board of the PhD Programme in Metrology at Politecnico di Torino since 2014. She is member of the “Teaching and Language Lab” of Politecnico di Torino and Advisor of the Women in Engineering Affinity Group, PoliTO IEEE Student Branch (2020-2022).
She is Secretary and Treasurer of the International Corrosion Council (ICC), 2021-2024; Secretary of the Working Party 21-Corrosion of Archaeological and Historical Artifacts of the European Federation of Corrosion, since 2019; Member of the AdCOM of the IEEE Instrumentation and Measurement Society (IMS) and Tutorial chair of the IMS Educational Committee, 2020-2023. She is Associate Editor of the IEEE - Transactions on Instrumentation and Measurement.
Curriculum
Scientific branch
(Area 0009 - Industrial and information engineering)
Research topics
- Conservation of Cultural Heritage: studies of degradation processes of metallic artifacts and development of tailored strategies for restoration and conservation; innovative technologies for protection of metallic artifacts; innovative sensors for indoor and outdoor environmental monitoring
- Electrochemistry and corrosion
- Optical and biomedical sensors, measurements for medicine and healthcare
- Plasma chemistry and physico-chemical characterization of nanostructured thin films
Skills
ERC sectors
SDG
Awards and Honors
- Abilitazione scientifica nazionale seconda fascia settore 09/D2 conferred by MIUR, Italy (2013)
- II Place Best Paper Award I2MTC conferred by IEEE Instrumentation and Measurement Society, Italy (2013)
- II place best paper award 2014 I2MTC conferred by IEEE - Institute of Electrical and Electronics Engineers, United States (2014)
- 1st place best paper award I2MTC2018 conferred by IEEE Instrumentation and Measurement Society, United States (2018)
- 1st best paper award I2MTC2020 conferred by IEEE Instrumentation and Measurement Society, United States (2020)
Fellowships
- Fellow - IEEE Institute of Electrical and Electronics Engineers, Stati Uniti (2018-)
Senior member
Editorial boards
- IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2018-), Director
- ACTA IMEKO (2018-), Director
Conferences
- 17th International Symposium on Medical Measurements and Applications - MeMeA2022 (1/1/2022-24/6/2022), Program chair
- IEEE International Symposium on Medical Measurements and Applications – MeMeA2020, Program chair
- IEEE - International Instrumentation and Measurement Technology Conference I2MTC2017, Program chair
- IMEKO International Conference on Metrology for Archaeology and Cultural Heritage - MetroArcheo2016, Program chair
- IEEE International Symposium on Medical Measurements and Applications – MeMeA2015, Program chair
- IEEE International Symposium on Medical Measurements and Applications - MeMeA2014, Program chair
- International Symposium on Medical Measurement and Application - MeMeA (4/5/2013-24/6/2022), Steering commitee
Research networks
- “European MIC Network – New paths for science, sustainability and standards” (Euro-MIC) (2021-). Partecipazione
Roles as evaluator or expert
- EuroTechPostdoc2 Programme – Excellence in Science and technology - Marie Skłodowska-Curie COFUND project under Horizon 2020. 2021
TECHNISCHE UNIVERSITEIT EINDHOVEN - TU/E
Teaching
PhD Boards
- METROLOGIA, 2021/2022 (38. ciclo)
Politecnico di TORINO - METROLOGIA, 2020/2021 (37. ciclo)
Politecnico di TORINO - METROLOGIA, 2019/2020 (36. ciclo)
Politecnico di TORINO - METROLOGIA, 2018/2019 (35. ciclo)
Politecnico di TORINO - METROLOGIA, 2017/2018 (34. ciclo)
Politecnico di TORINO - METROLOGIA, 2016/2017 (33. ciclo)
Politecnico di TORINO - METROLOGIA, 2015/2016 (32. ciclo)
Politecnico di TORINO - METROLOGIA, 2014/2015 (31. ciclo)
Politecnico di TORINO - METROLOGIA, 2013/2014 (30. ciclo)
Politecnico di TORINO
Courses of Study Boards
- Collegio di Ingegneria Biomedica. Componente
- Collegio di Ingegneria Chimica e dei Materiali. Componente
Teachings
PhD
- In-vitro and in-silico techniques for the chemical-mechanical analysis of materials and devices in the medical-dental field. A.A. 2022/23, BIOINGEGNERIA E SCIENZE MEDICO-CHIRURGICHE. Teaching assistant
Master of Science
- Corrosione e protezione dei materiali. A.A. 2017/18, INGEGNERIA DEI MATERIALI. Collaboratore del corso
- Corrosione e protezione dei materiali. A.A. 2018/19, INGEGNERIA DEI MATERIALI. Collaboratore del corso
- Corrosione e protezione dei materiali. A.A. 2019/20, INGEGNERIA DEI MATERIALI. Collaboratore del corso
- Corrosione e protezione dei materiali. A.A. 2020/21, INGEGNERIA DEI MATERIALI. Collaboratore del corso
- Corrosione e protezione dei materiali. A.A. 2021/22, INGEGNERIA DEI MATERIALI. Titolare del corso
- Corrosione e protezione dei materiali. A.A. 2022/23, INGEGNERIA DEI MATERIALI. Titolare del corso
Bachelor of Science
- Chimica. A.A. 2017/18, INGEGNERIA AEROSPAZIALE. Titolare del corso
- Chimica. A.A. 2018/19, INGEGNERIA AEROSPAZIALE. Titolare del corso
- Chimica. A.A. 2019/20, INGEGNERIA AEROSPAZIALE. Titolare del corso
- Chimica. A.A. 2020/21, INGEGNERIA AEROSPAZIALE. Titolare del corso
- Chimica. A.A. 2021/22, INGEGNERIA AEROSPAZIALE. Titolare del corso
- Chimica. A.A. 2022/23, INGEGNERIA AEROSPAZIALE. Titolare del corso
Research
Institute
Research fields
Research groups/teams
Laboratories
Research projects
Projects funded by competitive calls
- JOCHERA-JORDAN CONSERVATION OF CULTURAL HERITAGE IN ERA, (2012-2013) - Responsabile Scientifico
UE-funded research - VII PQ - CAPACITIES - International cooperation
Projects funded by commercial contracts
- Convenzione di collaborazione ai sensi dell’art. 15 della Legge n. 241/1990 tra il Politecnico di Torino – Dipartimento Scienza Applicata e Tecnologia (DISAT) e la Fondazione Centro di Conservazione e Restauro “La Venaria Reale” (CCR), (2022-2025) - Responsabile Scientifico
Departmental agreements - Convenzione dipartimentale tra il Politecnico di Torino – Dipartimento di Scienza Applicata e Tecnologia – DISAT e l’Opera di Santa Maria del Fiore, (2022-2023) - Responsabile Scientifico
Departmental agreements - Accordo di collaborazione scientifica tra il Politecnico di Torino - DISAT e il Centro di Eccellenza per la Ricerca (CIR), la Didattica e l'Assistenza in campo Odontostomatologico - Dental School dell'Università degli Studi di Torino, (2022-2027) - Responsabile Scientifico
Departmental agreements - Caratterizzazione del comportamento a corrosione di tubazioni dell'impianto antincendio sprinkler a secco installato nel parcheggio coperto dell'Ipercoop di Collegno (TO)", (2018-2018) - Responsabile Scientifico
Consulting - STUDIO DEL COMPORTAMENTO DI MATERIALI BICOMPONENTE POLIMERO/SCHIUMA SOTTOPOSTI A PROCESSI DI INVECCHIAMENTO ACCELERATO, (2010-2010) - Responsabile Scientifico
Consulting - SCELTA DEI MATERIALI OTTIMALI PER LA REALIZZAZIONE DI SCHEDE ELETTRONICHE PRODOTTE DALLA BITRON, (2009-2009) - Responsabile Scientifico
Consulting
Supervised PhD students
- Sara Croci. Programme in Metrologia (cycle 38, 2022-in progress)
- Federico Di Iorio. Programme in Metrologia (cycle 38, 2022-in progress)
- Valentina Maria Volanti. Programme in Metrologia (cycle 38, 2022-in progress)
- Paola Buscaglia. Programme in Metrologia (cycle 37, 2021-in progress)
- Giovanni D'Errico. Programme in Metrologia (cycle 37, 2021-in progress)
- Elena Giordano. Programme in Metrologia (cycle 37, 2021-in progress)
- Davide Pupillo. Programme in Scienza E Tecnologia Dei Materiali (cycle 37, 2021-in progress)
- Isabella Sannino. Programme in Metrologia (cycle 35, 2019-in progress)
Thesis: Impedance spectroscopy: non-invasive measurements for human tissues characterization - Leila Es Sebar. Programme in Metrologia (cycle 34, 2018-2022)
Thesis: Metrology for Cultural Heritage: multispectral 3D models by photogrammetry
Applied Metrology Instrumentation and Measurement - Mariano Pentella. Programme in Metrologia (cycle 34, 2018-2022)
Thesis: Characterization of magnetic materials at extreme ranges of field, temperature, and permeability
Sensors and Transducers Quality assurance Instrumentation and Measurement - Alessio Gullino. Programme in Metrologia (cycle 33, 2017-2021)
Thesis: New insight in biomedical measurements
Publications
PoliTO co-authors
Last years publications
Publications by type
Last years publications View all publications in Porto@Iris
-
Zaffora, Andrea; Giordano, Elena; Volanti, Valentina Maria; Iannucci, Leonardo; ... (2023)
Effect of TiO2 and Al2O3 Addition on the Performance of Chitosan/Phosphotungstic Composite Membranes for Direct Methanol Fuel Cells. In: MEMBRANES, vol. 13. ISSN 2077-0375
Contributo su Rivista -
Es Sebar, L.; Lombardo, L.; Buscaglia, P.; Cavaleri, T.; Lo Giudice, A.; Re, A.; Borla, ... (2023)
3D Multispectral Imaging for Cultural Heritage Preservation: The Case Study of a Wooden Sculpture of the Museo Egizio di Torino. In: HERITAGE, vol. 6, pp. 2783-2795. ISSN 2571-9408
Contributo su Rivista - Sannino, I; Angelini, E; Parvis, M; Arpaia, P; Grassini, S (2022)
Impedance spectroscopy for monitoring sound teeth and carious lesions. In: 2022 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Ottawa (Canada), 16-19 May 2022, pp. 1-5. ISSN 1091-5281. ISBN: 978-1-6654-8360-5
Contributo in Atti di Convegno (Proceeding) - Sebar, Le; Lombardo, L; Parvis, M; Angelini, E; Re, A; Grassini, S; Bovero, A; Lo ... (2022)
Metrological validation of a photogrammetry-based technique. In: 2022 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Ottawa (Canada), 16-19 May 2022, pp. 1-6. ISSN 1091-5281. ISBN: 978-1-6654-8360-5
Contributo in Atti di Convegno (Proceeding) -
Grassini, S.; ES SEBAR, Leila; Baldi, Andrea; Comba, A.; Angelini, E.; Berutti, E. (2022)
Measurements for restorative dentistry: shrinkage and conversion degree of bulk-fill composites. In: 17th IEEE International Symposium on Medical Measurements and Applications, MeMeA 2022, UNAHOTELS Naxos Beach, ita, 2022, pp. 1-6. ISBN: 978-1-6654-8299-8
Contributo in Atti di Convegno (Proceeding) -
ES SEBAR, Leila; Angelini, Emma; Baldi, Andrea; Comba, Allegra; Parvis, M.; Grassini, S. (2022)
Nanoindentation and Raman spectroscopy measurements on dual-cure luting cement for dental conservative restoration. In: 17th IEEE International Symposium on Medical Measurements and Applications, MeMeA 2022, UNAHOTELS Naxos Beach, ita, 2022, pp. 1-6. ISBN: 978-1-6654-8299-8
Contributo in Atti di Convegno (Proceeding) - Arpaia, Pasquale; Coyle, Damien; D’Errico, Giovanni; De Benedetto, Egidio; De Paolis, ... (2022)
Virtual Reality Enhances EEG-Based Neurofeedback for Emotional Self-regulation. In: XR Salento 2022, pp. 420-431. ISBN: 978-3-031-15552-9
Contributo in Atti di Convegno (Proceeding) -
ES SEBAR, Leila; Iannucci, L.; Parvis, M.; Grassini, S.; Angelini, E. (2022)
Atmospheric corrosion of outdoor bronze artefacts: The case study of 'Katarsis', by Magdalena Abakanowicz. In: 2021 International Conference on Metrology for Archaeology and Cultural Heritage (MetroArchaeo 2021), Milan, 2021, pp. 1-5. ISSN 1742-6588
Contributo in Atti di Convegno (Proceeding) -
Vietti, A; Angelini, E; Grassini, S; Donato, N (2022)
Raman spectroscopic characterization of corrosion products of archaeological iron. In: JOURNAL OF PHYSICS. CONFERENCE SERIES, vol. 2204. ISSN 1742-6588
Contributo su Rivista - Vigorelli, Luisa; Re, Alessandro; Buscaglia, Paola; Manfredda, Nicole; Nervo, Marco; ... (2022)
Comparison of two ancient Egyptian Middle Kingdom statuettes from the Museo Egizio of Torino through computed tomographic measurements. In: JOURNAL OF ARCHAEOLOGICAL SCIENCE: REPORTS, vol. 44. ISSN 2352-409X
Contributo su Rivista -
ES SEBAR, Leila; Iannucci, Leonardo; Grassini, Sabrina; Angelini, EMMA PAOLA MARIA ... (2022)
Characterization of the Santa Maria del Fiore Cupola construction tools using X-ray fluorescence. In: ACTA IMEKO, vol. 11, pp. 1-7. ISSN 2221-870X
Contributo su Rivista -
Peters, Manuel J. H.; Goren, Yuval; Fabian, Peter; Mirão, José; Bottaini, Carlo; ... (2022)
Roman coins at the edge of the Negev: characterisation of copper alloy artefacts and soil from Rakafot 54 (Beer Sheva, Israel). In: ACTA IMEKO, vol. 11, pp. 1-6. ISSN 2221-870X
Contributo su Rivista -
Lombardo, L.; Parvis, M.; Grassini, S.; Angelini, E. (2022)
Environmental monitoring solution for cultural heritage. In: 2021 IEEE International Conference on Metrology for Archaeology and Cultural Heritage, MetroArchaeo 2021, Milan, Italy, 20-22 October, 2021, pp. 1-5. ISSN 1742-6588
Contributo in Atti di Convegno (Proceeding) -
Vigorelli, Luisa; Re, Alessandro; Guidorzi, Laura; Brancaccio, Rosa; Bortolin, Cristina; ... (2022)
The study of ancient archaeological finds through X-ray tomography: the case of the “Tintinnabulum” from the Museum of Anthropology and Ethnography of Torino.. In: JOURNAL OF PHYSICS. CONFERENCE SERIES, vol. 2204. ISSN 1742-6588
Contributo su Rivista - Di Franco, F; Zaffora, A; Pupillo, D; Iannucci, L; Grassini, S; Santamaria, M (2022)
The Effect of Electronic Properties of Anodized and Hard Anodized Ti and Ti6Al4V on Their Reactivity in Simulated Body Fluid. In: JOURNAL OF THE ELECTROCHEMICAL SOCIETY, vol. 169. ISSN 0013-4651
Contributo su Rivista -
Tansella, Francesca; Vigorelli, Luisa; Ricchiardi, Gabriele; Re, Alessandro; Bonizzoni, ... (2022)
X-ray Computed Tomography Analysis of Historical Woodwind Instruments of the Late Eighteenth Century. In: JOURNAL OF IMAGING, vol. 8. ISSN 2313-433X
Contributo su Rivista -
Iannucci, L.; Grassini, S.; Parvis, M.; Carrara, S. (2022)
Sodium lactate solutions characterization using Electrochemical Impedance Spectroscopy. In: 17th IEEE International Symposium on Medical Measurements and Applications, MeMeA 2022, UNAHOTELS Naxos Beach, ita, 2022, pp. 1-5. ISBN: 978-1-6654-8299-8
Contributo in Atti di Convegno (Proceeding) -
Es Sebar, L.; Iannucci, L.; Grassini, S.; Angelini, E.; Rabinovich, R.; Bridault, A.; ... (2022)
Raman and micromorphological characterization of carbonates in plaster-like materials from the Natufian site of Eynan (Ain Mallaha), Israel. In: 2022 IMEKO TC-4 International Conference on Metrology for Archaeology and Cultural Heritage, MetroArchaeo 2022, Cosenza (Italia), 2022, pp. 17-22
Contributo in Atti di Convegno (Proceeding) -
Arpaia, Pasquale; Buzio, Marco; Di Capua, Vincenzo Di; Grassini, Sabrina; Parvis, Marco; ... (2022)
Drift-Free Integration in Inductive Magnetic Field Measurements Achieved by Kalman Filtering. In: SENSORS, vol. 22. ISSN 1424-8220
Contributo su Rivista -
Sannino, I.; Lombardo, L.; Angelini, E.; Parvis, M.; Arpaia, P.; Grassini, S. (2022)
Preliminary impedance spectroscopy study for carious lesions detection. In: 17th IEEE International Symposium on Medical Measurements and Applications, MeMeA 2022, Messina, Italy, 22-24 June 2022, pp. 1-6. ISBN: 978-1-6654-8299-8
Contributo in Atti di Convegno (Proceeding) -
Es Sebar, L.; Iannucci, L.; Grassini, S.; Angelini, E.; Parvis, M.; Antonino, R.; ... (2022)
Corrosion assessment of a bronze equestrian statue exposed to urban environment. In: KOROZE A OCHRANA MATERIÁLU, vol. 66, pp. 50-55. ISSN 1804-1213
Contributo su Rivista -
Sannino, I.; Grassini, S.; Parvis, M.; Angelini, E. (2022)
Garden building diagnostic systems for sustainable preservation. In: 2022 IEEE International Workshop on Metrology for Living Environment (MetroLivEn), Rende (Italia), pp. 308-313. ISBN: 978-1-6654-0893-6
Contributo in Atti di Convegno (Proceeding) -
Vigorelli, Luisa; Re, Alessandro; Giudorzi, Laura; Cavaleri, Tiziana; Buscaglia, Paola; ... (2022)
Multi-analytical approach for the study of an ancient Egyptian wooden statuette from the collection of Museo Egizio of Torino. In: ACTA IMEKO, vol. 11. ISSN 2221-870X
Contributo su Rivista -
Bender, R; Feron, D; Mills, D; Ritter, S; Bäßler, R; Bettge, D; De Graeve, I; Dugstad, ... (2022)
Corrosion challenges towards a sustainable society. In: MATERIALS AND CORROSION, vol. 73, pp. 1730-1751. ISSN 0947-5117
Contributo su Rivista -
Arpaia, Pasquale; Calabrese, Lucia; Chiarella, Salvatore G.; D'Errico, Giovanni; De ... (2022)
Mindfulness-based Emotional Acceptance in Combination with Neurofeedback for Improving Emotion Self-Regulation: a Pilot Study. In: 2022 IEEE International Conference on Metrology for Extended Reality, Artificial Intelligence and Neural Engineering (MetroXRAINE), Roma (Italy), 26-28 October 2022, pp. 465-470. ISBN: 978-1-6654-8574-6
Contributo in Atti di Convegno (Proceeding) -
Arpaia, Pasquale; D'Angelo, Mariano; D'Errico, Giovanni; De Paolis, Lucio Tommaso; ... (2022)
EEG features of the interaction between sense of agency and body ownership: a motor imagery BCI case study. In: 2022 IEEE International Conference on Metrology for Extended Reality, Artificial Intelligence and Neural Engineering (MetroXRAINE), Roma (Italy), 26-28 October 2022, pp. 104-109. ISBN: 978-1-6654-8574-6
Contributo in Atti di Convegno (Proceeding) - Di Francia, E.; Lahoz, R.; Neff, D.; de Caro, T.; Angelini, E.; Grassini, S. (2022)
Laser-cleaning effects induced on different types of bronze archaeological corrosion products: chemical-physical surface characterisation. In: APPLIED SURFACE SCIENCE, vol. 573. ISSN 0169-4332
Contributo su Rivista