Full Professor
Department of Applied Science and Technology (DISAT)
- Member of Interdepartmental Center SISCON - Safety of Infrastructures and Constructions
Profile
Research interests
Biography
Giulio Malucelli (born in Cuneo, November 6, 1967) is a chemical engineer and holds a Ph.D. in Chemistry. He is a full professor of Materials Science and Technology at the Department of Applied Science and Technology of Politecnico di Torino, Italy. He manages the ALL-POLYMER research group located at Politecnico di Torino, Alessandria branch. His research interests include the investigation of structure-property relationships in polymer and (micro-/nano)composite systems, the design, preparation, and characterization of functional coatings, and the flame retardance of textiles and bulk polymeric materials.
Scientific branch
(Area 0009 - Industrial and information engineering)
Skills
ERC sectors
SDG
Awards and Honors
- BEST PAPER AWARD conferred by Emerald Group Publishing Limited, United kingdom (2000)
- Abilitazione scientifica nazionale settore scientifico 09/D1 - I Fascia conferred by MIUR, Italy (2013)
- World's 2% Top Scientists conferred by Stanford University ed Elsevier, attraverso il database per la ricerca scientifica mondiale “Scopus” (2022)
Fellowships
- Founding partner - Associazione Italiana Macromolecole, Italia (2011-)
- Effective member - American Chemical Society, Stati Uniti (2008-)
Editorial boards
- APPLIED NANO (2019-), Editorial board member
- MOLECULES (2016-), Editorial board member
- POLYMER DEGRADATION AND STABILITY (2016-), Editorial board member
- POLYMERS (2015-), Editor of magazine, editorial series, encyclopaedia
Conferences
- XXI Congresso Nazionale dell’Associazione Italiana delle Macromolecole (14/9/2014-19/9/2014), Program chair
- WCT 2013 - 5th World Tribology Congress (8/9/2013-13/9/2013), Program committee
Research networks
- COST Action Flaretex MP1105 (2012-2016). Partecipazione
Non-commercial collaboration agreements
- Convenzione Operativa della Convenzione Quadro tra l'Istituto di Scienze e Tecnologie per l'energia e la Mobilità sostenibile - STEMS del Consiglio Nazionale delle Ricerche e il Politecnico di Torino- Dipartimento Scienza Applicata e Tecnologica-DISAT, (2022-2026) - Responsabile Scientifico
Non-commercial collaboration agreements - Convenzione operativa tra il Politecnico di Torino - Dipartimenti di Scienza applicata e tecnologia (DISAT) e il Consiglio Nazionale delle Ricerche – Istituto per le macchine agricole e il movimento della terra (IMAMOTER), (2018-2021) - Responsabile contrattuale
Non-commercial collaboration agreements
Teaching
PhD Boards
- SCIENZA E TECNOLOGIA DEI MATERIALI, 2021/2022 (38. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2020/2021 (37. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2019/2020 (36. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2018/2019 (35. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2017/2018 (34. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2016/2017 (33. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2015/2016 (32. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2014/2015 (31. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2013/2014 (30. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2012/2013 (29. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2011/2012 (28. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2010/2011 (27. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2009/2010 (26. ciclo)
Politecnico di TORINO - SCIENZA E TECNOLOGIA DEI MATERIALI, 2008/2009 (25. ciclo)
Politecnico di TORINO
Courses of Study Boards
- Collegio di Design. Componente
- Collegio di Ingegneria Gestionale e della Produzione. Componente
Teachings
PhD
- Additive Manufacturing Processes for Polymeric Materials. A.A. 2019/20, GESTIONE, PRODUZIONE E DESIGN. Teaching assistant
- Additive Manufacturing Processes for Polymeric Materials. A.A. 2020/21, GESTIONE, PRODUZIONE E DESIGN. Teaching assistant
- Additive Manufacturing Processes for Polymeric Materials. A.A. 2021/22, GESTIONE, PRODUZIONE E DESIGN. Teaching assistant
- Additive Manufacturing Processes for Polymeric Materials. A.A. 2022/23, GESTIONE, PRODUZIONE E DESIGN. Teaching assistant
Master of Science
- Polimeri avanzati, degradazione e riciclo dei polimeri. A.A. 2017/18, INGEGNERIA DEI MATERIALI. Collaboratore del corso
Bachelor of Science
- Design dell'esplorazione (modulo di Nuovi materiali per il design). A.A. 2017/18, DESIGN E COMUNICAZIONE VISIVA. Collaboratore del corso
- Design dell'esplorazione (modulo di Nuovi materiali per il design). A.A. 2018/19, DESIGN E COMUNICAZIONE VISIVA. Collaboratore del corso
- Design dell'esplorazione (modulo di Nuovi materiali per il design). A.A. 2018/19, DESIGN E COMUNICAZIONE VISIVA. Titolare del corso
- Design dell'esplorazione (modulo di Nuovi materiali per il design). A.A. 2019/20, DESIGN E COMUNICAZIONE VISIVA. Titolare del corso
- Design dell'esplorazione (modulo di Nuovi materiali per il design). A.A. 2020/21, DESIGN E COMUNICAZIONE VISIVA. Titolare del corso
- Design dell'esplorazione (modulo di Nuovi materiali per il design). A.A. 2021/22, DESIGN E COMUNICAZIONE. Titolare del corso
- Design dell'esplorazione (modulo di Nuovi materiali per il design). A.A. 2022/23, DESIGN E COMUNICAZIONE. Titolare del corso
- Tecnologia dei materiali. A.A. 2017/18, INGEGNERIA GESTIONALE. Titolare del corso
- Tecnologia dei materiali. A.A. 2018/19, INGEGNERIA GESTIONALE. Titolare del corso
- Tecnologia dei materiali. A.A. 2019/20, INGEGNERIA GESTIONALE. Titolare del corso
- Tecnologia dei materiali. A.A. 2020/21, INGEGNERIA GESTIONALE. Titolare del corso
- Tecnologia dei materiali. A.A. 2021/22, INGEGNERIA GESTIONALE. Titolare del corso
- Tecnologia dei materiali. A.A. 2022/23, INGEGNERIA GESTIONALE. Titolare del corso
Research
Institute
Research groups/teams
Laboratories
Research projects
Projects funded by competitive calls
- Biomacromolecules from municipal solid bio-waste fractions and fish waste for high added value applications, (2017-2020) - Responsabile Scientifico
UE-funded research - H2020 - Industrial Leadership – LEIT - NANOTECHNOLOGIES - SPUTTER-CAP - LINEA PROTOTIPO INTEGRATA DI BASE COATING, METALLIZZAZIONE SPUTTERING E TOP COATING, (2012-2014) - Responsabile Scientifico
Regionally funded research - ISECOMP - INNOVATIVE SYSTEM FOR ENVIRONMENTAL FRIENDLY COMPRESSORS, (2009-2011) - Responsabile Scientifico
Regionally funded research - Impiego di nuovi agenti disperdenti e compatibilizzanti per la preparazione di nanocompositi a base di poliolefine., (2004-2006) - Responsabile Scientifico
Nationally funded research - PRIN
Projects funded by commercial contracts
- Problematiche di adesione di una vernice su guarnizioni metalliche, (2020-2020) - Responsabile Scientifico
Consulting - SVILUPPO E TESTING DI UN CONCEPT TUBOLARE COMPOSTO DA COMPOSITI RINFORZATI CON FIBRE DI VETRO (TIPO E) DA RETICOLARE IN SITU MEDIANTE TECNICHE DI POLIMERIZZAZIONE FOTOINDOTTA, (2017-2022) - Responsabile contrattuale
Commercial Research - Attività di studio e caratterizzazione di materiali polimerici, (2017-2017) - Responsabile Scientifico
Consulting - Attività di prove ed analisi su materiali polimerici, (2016-2016) - Responsabile Scientifico
Consulting - Caratterizzazione termogravimetrica (TGA) di compositi a base PP rinforzato con fibre di vetro, (2016-2016) - Responsabile Scientifico
Consulting - Caratterizzazione termogravimetrica di lastre composite a matrice polipropilenica contenenti fibre di vetro, (2016-2016) - Responsabile Scientifico
Consulting - Misura del coefficiente di attrito sui tessuti non tessuti in poliestere mediante prove pin on disc, (2015-2015) - Responsabile Scientifico
Consulting - Prove su guarnizioni di cartucce gas, (2015-2015) - Responsabile Scientifico
Consulting - Caratterizzazione DSC e TGA di componenti in materiale polimerico per compressori oil free, (2015-2016) - Responsabile Scientifico
Consulting - Misurazioni mediante nicroscopia elettronica a scansione, (2015-2015) - Responsabile Scientifico
Consulting - Analisi TGA di lastre estruse caricate, (2015-2015) - Responsabile Scientifico
Consulting - Misura del coefficiente di attrito sui tessuti non tessuti in poliestere mediante prove pin on disc, (2015-2015) - Responsabile Scientifico
Consulting - Analisi TGA di lastre estruse caricate, (2015-2015) - Responsabile Scientifico
Consulting - Caratterizzazione DSC e TGA di componenti in materiale polimerico per compressori oil free, (2014-2015) - Responsabile Scientifico
Consulting - Caratterizzazione DSC e TGA di componenti in materiale polimerico per compressori oil free, (2014-2015) - Responsabile Scientifico
Consulting - Determinazione del valore dell'indice di ossigeno di campioni di PVC rigido per stampaggio a iniezione, (2014-2014) - Responsabile Scientifico
Consulting - Caratterizzazione dinamico-meccanica di un manufatto in resina epossidica, (2014-2014) - Responsabile Scientifico
Consulting - ANALISI SU MATERIALI PER COMPRESSORI OIL FREE ALLE CONDIZIONI NEL SEGUITO RIPORTATE, (2014-2015) - Responsabile Scientifico
Consulting - ANALISI DI CONFRONTO SU MATERIALI PER COMPRESSORI OIL FREE, (2014-2014) - Responsabile Scientifico
Consulting - CARATTERIZZAZIONE DI MANUFATTI TESSILI IN POLIPROPILENE MEDIANTE SPETTROSCOPIA INFRAROSSA ...., (2013-2014) - Responsabile Scientifico
Consulting - CARATTERIZZAZIONE DI MATERIALI POLIMERICI PER COMPRESSORI OIL FREE, (2013-2014) - Responsabile Scientifico
Consulting - SVILUPPO DI TESSILI MULTIFUNZIONALI PER IL MADE IN ITALY, (2013-2013) - Responsabile Scientifico
Commercial Research - SVILUPPO DI TESSILI MULTIFUNZIONALI PER IL MADE IN ITALY, (2013-2014) - Responsabile Scientifico
Commercial Research - SVILUPPO DI TESSILI MULTIFUNZIONALI PER IL MADE IN ITALY, (2013-2014) - Responsabile Scientifico
Commercial Research - TRATTAMENTI SUPERFICIALI DI TESSILI NATURALI E SINTETICI, (2013-2014) - Responsabile Scientifico
Commercial Research - SVILUPPO DI TESSILI MULTIFUNZIONALI PER IL MADE IN ITALY, (2013-2014) - Responsabile Scientifico
Commercial Research - ASSESSMENT OF ELEGIBILITY OF POLYPROPYLENE COMPOSITES CONTAINING WOOD FIBERS TO IRANIAN MARKET CONNECTED ...., (2013-2013) - Responsabile Scientifico
Consulting - CARATTERIZZAZIONE DI UN COMPONENTE IN MATERIALE POLIMERICO UTILIZZATO IN UN RINVIO CATENA, (2013-2013) - Responsabile Scientifico
Consulting - PREPARAZIONE VIA COMPOUDING DI MISCELE A DIVERSA CONCENTRAZIONE DI POLIESTERE E CHERATINA, (2011-2011) - Responsabile Scientifico
Consulting - PREPARAZIONE VIA COMPOUNDING DI MISCELE A DIVERSA CONCENTRAZIONE DI POLIESTERE E CHERATINA, (2011-2012) - Responsabile Scientifico
Consulting - VALUTAZIONE DELLA CONVERSIONE TRAMITE SPETTROSCOPIA IR DI INCHIOSTRI INK-JET FOTOPOLIMERIZZABILI, (2011-2011) - Responsabile Scientifico
Consulting - TEST DI VISCOSITÀ INTRINSECA TEST DI VISCOSITÀ COMPLESSA E STESURA DEL REPORT FINALE SULLE PROVE SVOLTE, (2011-1931) - Responsabile Scientifico
Consulting - STUDIO DI RIVESTIMENTI PLASTICI IN PVC PLASTIFICATO, (2010-2011) - Responsabile Scientifico
Commercial Research - ACCERTAMENTO DELLE CONDIZIONI DI DEGRADO DEL CONDOMINIO LE FORNACI E PERDITA DELLE ORIGINARIE CARATTERISTICHE INVECCHIAMENTO PRECOCE, INGIALLIMENTO)....., (2008-2008) - Responsabile Scientifico
Consulting - Caratterizzazione DSC e TGA di componenti in materiale polimerico per compressori oil free, (-2016) - Responsabile Scientifico
Consulting
Supervised PhD students
- Samuele Matta. Programme in Scienza E Tecnologia Dei Materiali (cycle 35, 2019-in progress)
Thesis: Investigation of Different Types of Biochar on the Thermal Stability and Fire Retardancy of polymer - Valentina Strongone. Programme in Scienza E Tecnologia Dei Materiali (cycle 33, 2017-2021)
Thesis: Preparation and characterization of UV-LED curable composite systems based on carbon fillers
Publications
Last years publications
Publications by type
Last years publications View all publications in Porto@Iris
- Palucci Rosa, Raphael; Rosace, Giuseppe; Arrigo, Rossella; Malucelli, Giulio (2023)
Preparation and characterization of a fully biobased resin system for 3d‑printing, suitable for replacing fossil‑based acrylates. In: JOURNAL OF POLYMER RESEARCH, vol. 30. ISSN 1022-9760
Contributo su Rivista - Malucelli, Giulio; Kausar, Ayesha (2023)
Green composites and nanocomposites for aerospace applications. In: Polymeric nanocomposites with carbonaceous nanofillers for aerospace applications / Kausar A., Cambridge, MA, United States, Elsevier, pp. 297-316. ISBN: 9780323996570
Contributo in Volume -
Bifulco, Aurelio; Avolio, Roberto; Lehner, Sandro; Emanuela Errico, Maria; Clayden, ... (2023)
In Situ P-Modified Hybrid Silica–Epoxy Nanocomposites via a Green Hydrolytic Sol–Gel Route for Flame-Retardant Applications. In: ACS APPLIED NANO MATERIALS, vol. 6, pp. 7422-7435. ISSN 2574-0970
Contributo su Rivista -
Mariani, Alberto; Malucelli, Giulio (2023)
Consolidation of Stone Materials by Organic and Hybrid Polymers: An Overview. In: MACROMOLECULAR CHEMISTRY AND PHYSICS, vol. 2300053, pp. 1-16. ISSN 1022-1352
Contributo su Rivista -
Di Maro, Mattia; Giulia Faga, Maria; Pedraza, Riccardo; Malucelli, Giulio; Bartoli, ... (2023)
Effect of Hemp Hurd Biochar and Humic Acid on the Flame Retardant and Mechanical Properties of Ethylene Vinyl Acetate. In: POLYMERS, vol. 15. ISSN 2073-4360
Contributo su Rivista - Malucelli, Giulio (2023)
Self-healing polymers. In: Specialty Polymers: Fundamentals, Properties, Applications and Advances (1st ed.) / Ram Gupta, Pittsburg (USA), CRC Press, pp. 81-96. ISBN: 9781003278269
Contributo in Volume - Arrigo, Rossella; Malucelli, Giulio (2023)
Polymers for additive manufacturing. In: Specialty Polymers: Fundamentals, Properties, Applications and Advances (1st ed.) / Ram Gupta, Pittsburg (USA), CRC Press, pp. 143-156. ISBN: 9781003278269
Contributo in Volume -
Mariani, Alberto; Malucelli, Giulio (2023)
Insights into Induction Heating Processes for Polymeric Materials: An Overview of the Mechanisms and Current Applications. In: ENERGIES, vol. 16. ISSN 1996-1073
Contributo su Rivista - Malucelli, Giulio (2023)
Clay-Epoxy Nanocomposites: Current State-of-the-Art Research and Perspectives. In: Advances in Nanotechnology / Bartul Z., Trevor J., New York, Nova Science Publishers, Inc., pp. 119-142. ISBN: 979-8-88697-462-1
Contributo in Volume -
Suslick, Benjamin A.; Hemmer, Julie; Groce, Brecklyn R.; Stawiasz, Katherine J.; ... (2023)
Frontal Polymerizations: From Chemical Perspectives to Macroscopic Properties and Applications. In: CHEMICAL REVIEWS, vol. 123, pp. 3237-3298. ISSN 0009-2665
Contributo su Rivista -
Duraccio, Donatella; Paolo Capra, Pier; Fioravanti, Ambra; Malucelli, Giulio (2023)
Influence of Mechanical Properties on the Piezoelectric Response of UV-Cured Composite Films Containing Different ZnO Morphologies. In: POLYMERS, vol. 15. ISSN 2073-4360
Contributo su Rivista -
Branda, Francesco; Parida, Dambarudhar; Pauer, Robin; Durante, Massimo; Gaan, ... (2022)
Effect of the Coupling Agent (3-Aminopropyl) Triethoxysilane on the Structure and Fire Behavior of Solvent-Free One-Pot Synthesized Silica-Epoxy Nanocomposites. In: POLYMERS, vol. 14. ISSN 2073-4360
Contributo su Rivista - Malucelli, Giulio (2022)
Flame-retardant waterborne polyurethanes. In: Eco-Friendly Waterborne Polyurethanes Synthesis, Properties, and Applications / Ram K. Gupta; Ajay Kumar Mishra, Boca Raton, CRC Press, pp. 119-135. ISBN: 9781003173526
Contributo in Volume -
Mariani, Alberto; Malucelli, Giulio (2022)
Transparent wood-based materials: current state-of-the-art and future perspectives. In: MATERIALS, vol. 15. ISSN 1996-1944
Contributo su Rivista -
Giulia Faga, Maria; Duraccio, Donatella; Di Maro, Mattia; Pedraza, Riccardo; Bartoli, ... (2022)
Ethylene-Vinyl Acetate (EVA) containing waste hemp-derived biochar fibers: mechanical, electrical, thermal and tribological behavior. In: POLYMERS, vol. 14. ISSN 2073-4360
Contributo su Rivista - Duraccio, Donatella; Paolo Capra, Pier; Malucelli, Giulio; Arrigo, Rossella; Roccato, ... (2022)
Electrical measurements of ultra high molecular weight polyethylene composites as indicators of the manufacturing process reproducibility. In: 2022 IEEE International Symposium on Medical Measurements and Applications (MeMeA), Giardini Naxos - Taormina , Messina, Italy, June 22-24, 2022. ISBN: 978-1-6654-8299-8
Contributo in Atti di Convegno (Proceeding) -
Matta, Samuele; Bartoli, Mattia; Arrigo, Rossella; Frache, Alberto; Malucelli, Giulio (2022)
Flame retardant potential of Tetra Pak®-derived biochar for ethylene-vinyl-acetate copolymers. In: COMPOSITES. PART C, OPEN ACCESS, vol. 8. ISSN 2666-6820
Contributo su Rivista -
Arrigo, Rossella; Frache, Alberto; Malucelli, Giulio (2022)
Effect of the elongational flow on mechanical properties and thermal conductivity of polypropylene-boron nitride composite fibers. In: XXIV Convegno Nazionale dell’Associazione Italiana di Scienza e Tecnologia delle Macromolecole, Trento (Italia), 4-7 settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Arrigo, Rossella; Malucelli, Giulio (2022)
Time-resolved mechanical spectroscopy of epoxidized natural rubber/SiO2 composite. In: XXIV Convegno Nazionale dell’Associazione Italiana di Scienza e Tecnologia delle Macromolecole, Trento (Italia), 4-7 settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Arrigo, Rossella; Bartoli, Mattia; Torsello, Daniele; Ghigo, Gianluca; Malucelli, Giulio (2022)
UV-Led curable coatings containing porcupine-like carbon structures: thermal, dynamic-mechanical and electrical properties. In: XXIV Convegno Nazionale dell’Associazione Italiana di Scienza e Tecnologia delle Macromolecole, Trento (Italia), 4-7 settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Arrigo, Rossella; Botta, Luigi; Mistretta, ; Maria, Chiara; La, Mantia; Francesco, ... (2022)
Bionanocomposites for industrial applications: structure–property relationships. In: XXIV Convegno Nazionale dell’Associazione Italiana di Scienza e Tecnologia delle Macromolecole, Trento (Italia), 4-7 settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Fontana, Luca; Giubilini, Alberto; Arrigo, Rossella; Malucelli, Giulio; Minetola, Paolo (2022)
Characterization of 3D Printed Polylactic Acid by Fused Granular Fabrication through Printing Accuracy, Porosity, Thermal and Mechanical Analyses. In: POLYMERS, vol. 14, pp. 1-19. ISSN 2073-4360
Contributo su Rivista -
Bartoli, Mattia; Arrigo, Rossella; Malucelli, Giulio; Tagliaferro, Alberto; Duraccio, ... (2022)
Recent Advances in Biochar Polymer Composites. In: POLYMERS, vol. 14. ISSN 2073-4360
Contributo su Rivista - Malucelli, Giulio (2022)
Chitosan-based flame-retardant polymeric materials and their applications. In: Bio-based flame retardant technology for polymeric materials / Yuan Hu, Hafezeh Nabipour, Xin Wang, Amsterdam, Elsevier, pp. 187-226. ISBN: 978-0-323-90771-2
Contributo in Volume -
Duraccio, Donatella; Arrigo, Rossella; Bartoli, Mattia; Paolo Capra, Pier; Malucelli, ... (2022)
Influence of different dry-mixing techniques on the mechanical, thermal, and electrical behavior of ultra-high molecular weight polyethylene/exhausted tire carbon composites. In: POLYMERS FOR ADVANCED TECHNOLOGIES, pp. 1-10. ISSN 1042-7147
Contributo su Rivista -
Palucci Rosa, Raphael; Rosace, Giuseppe; Arrigo, Rossella; Malucelli, Giulio (2022)
Preparation and characterization of 3D-Printed biobased composites containing micro- or nanocrystalline cellulose. In: POLYMERS, vol. 14. ISSN 2073-4360
Contributo su Rivista - Vahabi, Henri; Saeb, Mohammad; Malucelli, Giulio, a cura di (2022)
Analysis of flame retardancy in polymer science. New York, Elsevier, P. 454. ISBN: 9780128240458
Curatele -
Rosace, G.; Palucci Rosa, R.; Arrigo, R.; Malucelli, G. (2022)
Investigation of Epoxy-Acrylate Soybean Oil as A Bio-Enhancer for 3D Printing Application. In: XXIV Convegno Nazionale dell'Associazione Italiana Macromolecole, Trento, 4-7 Settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Duraccio, D.; Arrigo, R.; Capra, P. P.; Malucelli, G. (2022)
Rheological, Mechanical, Thermal and Electrical Properties of UHMWPE/CNC Composites. In: XXIV Convegno Nazionale dell'Associazione Italiana Macromolecole, Trento, 4-7 Settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Di Maro, M.; Duraccio, D.; Signore, M. A.; De Pascali, C.; Fioravanti, A.; Melissano, ... (2022)
Synthesis and Characterization of UV-curable nanocellulose/ZnO/AlN acrylic flexible films: thermal, dynamic mechanical and piezoelectric response. In: XXIV Convegno Nazionale dell'Associazione Italiana Macromolecole, Trento, 4-7 Settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Pugliese, D.; Malucelli, G. (2022)
UV-LED Curable Acrylic Films Containing Phosphate Glass Powder: Effect of The Filler Loading on the Thermal, Optical, Mechanical and Flame Retardant Properties. In: XXIV Convegno Nazionale dell'Associazione Italiana Macromolecole, Trento, 4-7 Settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Pugliese, Diego; Malucelli, Giulio (2022)
UV-LED curable acrylic films containing phosphate glass powder: effect of the filler loading on the thermal, optical, mechanical and flame retardant properties. In: POLYMERS, vol. 14. ISSN 2073-4360
Contributo su Rivista -
Malucelli, Giulio (2022)
How to reduce the flammability of plastics and textiles through surface treatments: recent advances. In: COATINGS, vol. 12. ISSN 2079-6412
Contributo su Rivista -
Arrigo, R.; Botta, L.; Mistretta, M. C.; La Mantia, F. P.; Malucelli, G. (2022)
Structure–property relationships in bionanocomposites for industrial applications. In: XIII Convegno INSTM sulla Scienza e Tecnologia dei Materiali, Sestriere, 23-26 gennaio 2022
Contributo in Atti di Convegno (Proceeding) -
Domínguez-Ramos, Lidia; Prieto-Estalrich, Ainoha; Malucelli, Giulio; Gómez-Díaz, Diego; ... (2022)
N- and S-doped carbons derived from polyacrylonitrile for gases separation. In: SUSTAINABILITY, vol. 14. ISSN 2071-1050
Contributo su Rivista -
Bartoli, Mattia; Duraccio, Donatella; Faga, Maria Giulia; Piatti, Erik; Torsello, ... (2022)
Mechanical, electrical, thermal and tribological behavior of epoxy resin composites reinforced with waste hemp-derived carbon fibers. In: JOURNAL OF MATERIALS SCIENCE. ISSN 0022-2461
Contributo su Rivista -
Matta, Samuele; Arrigo, Rossella; Malucelli, Giulio; Frache, Alberto (2022)
Polymer composites containing different types of Biochar: novel fire retardant systems. In: XXIV Convegno Nazionale - Associazione Italiana di Scienza e Tecnologia delle Macromolecole (AIM), Trento, 4-7 Settembre 2022, pp. 137-138
Contributo in Atti di Convegno (Proceeding) -
Di Maro, M.; Faga, M. G.; Duraccio, D.; Kowandy, C.; Mussano, F. D.; Genova, T.; ... (2022)
Electron-Beam-Induced Grafting Of Chitosan Onto HDPE/ATZ Composites for Biomedical Applications. In: XXIV Convegno Nazionale dell'Associazione Italiana Macromolecole, Trento, 4-7 Settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Palucci Rosa, R.; Rosace, G.; Arrigo, R.; Malucelli, G. (2022)
Evaluation of a Biobased Resin with Micro- or Nanocrystalline Cellulose for 3D-Printing Application. In: XXIV Convegno Nazionale dell'Associazione Italiana Macromolecole, Trento, 4-7 Settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Leonelli, C.; Malucelli, G.; Mariani, A.; Nuvoli, D.; Spinella, A. (2022)
Frontal Polymerization and Geopolymerization, the First Example: Organic-Inorganic Hybrid Materials. In: XXIV Convegno Nazionale dell'Associazione Italiana Macromolecole, Trento, 4-7 Settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Di Maro, M.; Duraccio, D.; Faga, M. G.; Malucelli, G. (2022)
High Density Polyethylene Composites Containing Alumina-Toughened Zirconia Particles: Mechanical and Tribological Behavior. In: XXIV Convegno Nazionale dell'Associazione Italiana Macromolecole, Trento, 4-7 Settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Torsello, D.; Bartoli, M.; Giorcelli, M.; Arrigo, R.; Malucelli, G.; Tagliaferro, A.; ... (2022)
High Frequency Electromagnetic Shielding by Biochar-Based Composites. In: XXIV Convegno Nazionale dell'Associazione Italiana Macromolecole, Trento, 4-7 Settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Duraccio, D.; Arrigo, R.; Bartoli, M.; Capra, P. P.; Malucelli, G. (2022)
Influence of Different Dry-Mixing Techniques on the Mechanical, Thermal and Electrical Behavior of Ultra High Molecular Weight Polyethylene/Exhausted Tire Carbon Composites. In: XXIV Convegno Nazionale dell'Associazione Italiana Macromolecole, Trento, 4-7 Settembre 2022
Contributo in Atti di Convegno (Proceeding) -
Bifulco, Aurelio; Imparato, Claudio; Aronne, Antonio; Malucelli, Giulio (2022)
Flame retarded polymer systems based on the sol-gel approach: recent advances and future perspectives. In: JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY. ISSN 0928-0707
Contributo su Rivista
Society and Enterprise
Patents and other intellectual properties
- Impiego di polibutadieni liquidi funzionalizzati per la preparazione di nanocompositi polimerici a base di argille lamellari. national Patent - Responsabile Scientifico
Consulting