Quality controls for low-volume productions

• I was invited by the CIRP CATS 2020 organizing team to chair the session “Session 6 - Assembly Processes and Technologies” during the 8th CIRP Conference on Assembly Technologies and Systems on September 30th, 2020. (2021)
• Vincitrice del Premio di Qualità 2019 del Dottorato di Ricerca in Gestione, Produzione e Design (2021)
• Vincitrice della borsa per attività di ricerca “Predisposizione di un piano sperimentale (DoE) e analisi statistica dei dati per l’ottimizzazione del processo di degasaggio e del processo di produzione dei prodotti “NCC lunghi” presso gli stabilimenti Lavazza S.P.A", di cui alla determina n. 1725/2018., della durata di 3 mesi. (2019)
• Vincitrice borsa ERASMUS+/PROGRAMME COUNTRIES – PhD - Visiting period presso Trinity College Dublin (2019)
• The paper "Robustness analysis of inspection design parameters for assembly of short-run manufacturing processes" was recognized by the 3rd International Conference on Quality Engineering and Management 2018 Scientific Commitee with the Best Paper Award ICQEM18. (2018)
• I was mentioned in the Acknowledgments of the paper "Product complexity and design of inspection strategies for assembly manufacturing processes" by the authors Gianfranco Genta, Maurizio Galetto and Fiorenzo Franceschini (2018)

• Collegio di Ingegneria Gestionale e della Produzione. Componente invitato
• Collegio di Ingegneria Meccanica, Aerospaziale, dell'Autoveicolo. Componente

Master of Science

• Ingegneria della qualità. A.A. 2019/20, INGEGNERIA GESTIONALE. Collaboratore del corso

Bachelor of Science

• Gestione industriale della qualità. A.A. 2019/20, INGEGNERIA MECCANICA. Collaboratore del corso
• Statistica sperimentale e misure meccaniche. A.A. 2018/19, INGEGNERIA MECCANICA. Collaboratore del corso
• Statistica sperimentale e misure meccaniche. A.A. 2019/20, INGEGNERIA MECCANICA. Collaboratore del corso
• Statistica sperimentale e misure meccaniche. A.A. 2020/21, INGEGNERIA MECCANICA. Collaboratore del corso

• Quality engineering

• Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio; Franceschini, Fiorenzo (2021)
  Defect prediction models to improve assembly processes in low-volume productions. In: 8th CIRP Conference of Assembly Technology and Systems, Athens (Greece), 29 Settembre - 1 Ottobre 2020, pp. 148-153. ISSN 2212-8271
  Contributo in Atti di Convegno (Proceeding)
• Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio; Franceschini, Fiorenzo (2021)
  Towards Zero Defect Manufacturing: probabilistic model for quality control effectiveness. In: 2021 IEEE International Workshop on Metrology for Industry 4.0 & IoT (MetroInd4.0&IoT), Virtual Conference, June 7-9, 2021, pp. 522-526. ISBN: 978-1-6654-1979-6
  Contributo in Atti di Convegno (Proceeding)
• Verna, Elisa; Biagi, Roberto; Kazasidis, Marios; Galetto, Maurizio; Bemporad, Edoardo; ... (2021)
  Evaluating erosion performance of cold-sprayed coatings by Design of Experiments. In: Mathematical and Statistical Methods for Metrology MSMM 2021, Virtual Workshop, 31 maggio - 1 giugno 2021, pp. 47-48
  Contributo in Atti di Convegno (Proceeding)
• Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio; Franceschini, Fiorenzo (2021)
  Inspection planning by defect prediction models and inspection strategy maps. In: PRODUCTION ENGINEERING, vol. 15, pp. 897-915. ISSN 0944-6524
  Contributo su Rivista
• Verna, Elisa (2021)
  Inspection Strategies and Defect Prediction Models for quality control in low-volume productions. relatore: GALETTO, MAURIZIO; , 33. XXXIII Ciclo, P.: 162
  Doctoral Thesis
• Kazasidis, Marios; Verna, Elisa; Yin, Shuo; Lupoi, Rocco (2021)
  The effect of heat treatment and impact angle on the erosion behavior of nickel-tungsten carbide cold spray coating using response surface methodology. In: EMERGENT MATERIALS, vol. 4, pp. 1605-1618. ISSN 2522-5731
  Contributo su Rivista
• Galetto, Maurizio; Genta, Gianfranco; Maculotti, Giacomo; Verna, Elisa (2020)
  Defect Probability Estimation for Hardness-Optimised Parts by Selective Laser Melting. In: INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol. 21, pp. 1739-1753. ISSN 2234-7593
  Contributo su Rivista
• Verna, E.; Genta, G.; Galetto, M.; Franceschini, F. (2020)
  Planning offline inspection strategies in low-volume manufacturing processes. In: QUALITY ENGINEERING, vol. 32, pp. 705-720. ISSN 0898-2112
  Contributo su Rivista
• Galetto, M.; Verna, E.; Genta, G. (2020)
  Accurate estimation of prediction models for operator-induced defects in assembly manufacturing processes. In: QUALITY ENGINEERING, vol. 32, pp. 595-613. ISSN 0898-2112
  Contributo su Rivista
• Galetto, Maurizio; Verna, Elisa; Genta, Gianfranco; Franceschini, Fiorenzo (2020)
  Uncertainty evaluation in the prediction of defects and costs for quality inspection planning in low-volume productions. In: THE INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol. 108, pp. 3793-3805. ISSN 1433-3015
  Contributo su Rivista
• Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio; Franceschini, Fiorenzo (2020)
  Defect prediction model for wrapping machines assembly. In: 4th International Conference on Quality Engineering and Management, 21-22 September 2020, pp. 115-134. ISBN: 978-989-54911-0-0
  Contributo in Atti di Convegno (Proceeding)
• Verna, Elisa; Biagi, Roberto; Kazasidis, Marios; Galetto, Maurizio; Bemporad, Edoardo; ... (2020)
  Modeling of Erosion Response of Cold-Sprayed In718-Ni Composite Coating Using Full Factorial Design. In: COATINGS, vol. 10. ISSN 2079-6412
  Contributo su Rivista
• Verna, Elisa; Genta, Gianfranco; Galetto, Maurizio; Franceschini, Fiorenzo (2019)
  Designing quality inspection in short-run assembly processes of wrapping machines. In: EOQ Congress 2019 - Rediscovering quality, Lisbona (Portogallo), 23-24 Ottobre 2019, pp. 15-15
  Contributo in Atti di Convegno (Proceeding)
• Verna, Elisa; Genta, Gianfranco; Franceschini, Fiorenzo; Galetto, Maurizio (2019)
  Assessment of inspection strategies in assembly manufacturing processes. In: Mathematical and Statistical Methods for Metrology - MSMM 2019, Torino, 30-31 Maggio 2019, pp. 25-26
  Contributo in Atti di Convegno (Proceeding)